NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual D19 – 291
Doc. No. 8201 - Release 1.0
July 2003
Dterm Series i Multiline 
Te r m i n a l s
D-19
FEATURE 
DESCRIPTIONThe Dterm Series i Multiline Terminals provide ergonomic form and user-
friendly functions. With advanced digital circuitry, these terminals consist of
distinct models to meet users’ diverse telephone terminal needs.
SYSTEM 
AVAILABILITYTerminal Type
DTR-16LD-1A (BK)/(WH) TEL
DTR-32D-1A (BK)/(WH) TEL
DTR-16D-1A (BK)/(WH) TEL
DTR-8D-1A (BK)/(WH) TEL...

July 2003 NEC Business Solutions Ltd
292 – D19 Dterm Series i Multiline Terminals
Doc. No. 8201 - Release 1.0
July 2003
OPERATING 
PROCEDURES
SERVICE 
CONDITIONS
General
	The  D
term Series i Multiline Terminals with an adjustable display offer
soft key operation.  The LCD panel has three lines of display, each with
24 characters. Standard features include headset jacks, wall mount
units, and adjustable-base units.
	The  D
term Series i Multiline Terminals support dedicated function keys
to provide easy...

Xen IPK Features and Specifications Manual
Features and Specifications Manual D19 – 293
Doc. No. 8201 - Release 1.0
July 2003
	The dial pad is detachable allowing for easy customisation for a
foreign language or for Automatic Call Distribution (ACD) applications.
	With the DTR-16LD-1A( ) TEL, the 16-Line Keys are labelled by the
LCD by assignment in system data. The LCD also supports the LED
status for trunks, Call Appearance Keys (CAP), DSS/BLF keys, and
select Feature keys/Feature Access keys.
	Use...

July 2003 NEC Business Solutions Ltd
294 – D19 Dterm Series i Multiline Terminals
Doc. No. 8201 - Release 1.0
July 2003
	Up to two adapters can be installed in a Dterm Series i Multiline
Terminal (except DTR-2DT-1A). For compatibility of multiple adapter
units, refer to the following table. 
	The ACA-U( ) UNIT (AC Adapter) is required when any of the
following adapters are installed in a D
term Series i Multiline Terminal:
zAP(R)-R()
zCT(U)-R()
zDCR-60-1A( ) Console
	The WM-R
() UNIT (Wall Mount Unit) is...

Xen IPK Features and Specifications Manual
Features and Specifications Manual D19 – 295
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BS
Telephone Type Assignment 7-2
¶+BTMLine Key Selection for Telephone Mode 4-12
¶+BTMMultiline Terminal Type Selection 4-50
¶+BTMLCD Line Key Name Assignment 4-68 

July 2003 NEC Business Solutions Ltd
296 – D19 Dterm Series i Multiline Terminals
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual D20 – 297
Doc. No. 8201 - Release 1.0
July 2003
DTU-type Multiline 
Terminal Migration
D-20
FEATURE 
DESCRIPTIONDTU-type Multiline Terminal Migration allows an Xen Axis/Master customer
to protect their investment in terminals when purchasing Xen IPK system.
DTU-type Multiline Terminals can be easily used with the Xen IPK systems.
With very few exceptions, all terminal features and abilities that are possible
on Xen Axis/Master systems are also possible with the Xen IPK...

July 2003 NEC Business Solutions Ltd
298 – D20 DTU-type Multiline Terminal Migration
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
S-9 Softkeys
Feature 
NumberFeature Name
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BS
Telephone Type Assignment 7-2
¶+BTMLine Key Selection for Telephone Mode 4-12
¶+BTMMultiline Terminal Type Selection 4-50 

Features and Specifications Manual E1 – 299
Doc. No. 8201 - Release 1.0
July 2003
Elapsed Call TimerE-1
FEATURE 
DESCRIPTIONThe Elapsed Call Timer feature provides each Multiline Terminal with an
indication on the LCD showing how long the station has been connected to
an outside line.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals equipped with an LCD.
Required Components
None.
OPERATING 
PROCEDURES
SERVICE 
CONDITIONS
General
	The elapsed call time is shown on the LCD when a Multiline...

July 2003 NEC Business Solutions Ltd
300  - E1Elapsed Call Timer
Doc. No. 8201 - Release 1.0
July 2003
	The Elapsed Call Timer display clears when receiving a Tone
Override. 
	During a conference call that includes one outside party and two
internal parties, the Elapsed Call Timer shows on the display of the two
internal parties.
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BMStart Time Selection...