NEC Xen Ipk Features And Specifications Manual

Xen IPK Features and Specifications Manual
Features and Specifications Manual D7 – 251
Doc. No. 8201 - Release 1.0
July 2003
	A Feature Access key or One-Touch key can be assigned for easy
message access.
	If a call transferred from a Voice Mail port is not answered in three
minutes (fixed timer), the call recalls to the Voice Mail port.
	If a station is programmed for multiple Call Forward (e.g.,100 CFWD -
101 CFWD - VM Hunt Group) and a call is made to station 100, the
caller is forwarded to the...

July 2003 NEC Business Solutions Ltd
252 – D7Digital Voice Mail
Doc. No. 8201 - Release 1.0
July 2003
	An alert tone is provided for Live Recording. The alert tone is heard by
both the outside party and the Multiline Terminal user when the
recording starts or at specified intervals during recording. The interval
between alert tones is assigned in the Digital Voice Mail System
Programming. The tone lasts for 0.5 seconds. The system can also be
programmed so that an alert tone is not provided.
	Up to seven...

Xen IPK Features and Specifications Manual
Features and Specifications Manual D7 – 253
Doc. No. 8201 - Release 1.0
July 2003
	Only CO/PBX, Tie, and DID calls can be recorded using
Live Recording. Internal calls cannot be recorded by the Live
Recording feature.
	The Record key LED is on when all conference circuits or all Digital
Voice Mail ports are busy.
	Any station user can direct a live recorded message to another
station user.
	Any Multiline Terminal can change the Message Notification mode to
Pager...

July 2003 NEC Business Solutions Ltd
254 – D7Digital Voice Mail
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMINGDigital Voice Mail (Installation)
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BSCard Interface Slot Assignment 7-1
¶+BS4Telephone Type Assignment7-2
¶+BS4Station Number Assignment4-10
¶+BTT4Intercom Master Hunt Number Selection4-14
¶+BTT4Intercom Master Hunt Number Forward 
Selection4-15
¶+AV4Voice...

Xen IPK Features and Specifications Manual
Features and Specifications Manual D7 – 255
Doc. No. 8201 - Release 1.0
July 2003
Digital Voice Mail (Caller ID Display with Call Return)
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-
Line Key
¶+BCTTrunk-to-Trunk Group Assignment 3-03
¶+BCTTrunk Type Selection 3-91
¶+BTTLCR Class Selection 4-40
¶+BTT4Station to Class of Service Feature Assignment4-17
¶+ATTandem Transfer Automatic Disconnect Time...

July 2003 NEC Business Solutions Ltd
256 – D7Digital Voice Mail
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual D8 – 257
Doc. No. 8201 - Release 1.0
July 2003
Direct Inward Dialling 
(DID)
D-8
FEATURE 
DESCRIPTIONDirect Inward Dialling lines can be connected to the system. With DID,
incoming calls from the CO can reach any station in the system without
Attendant intervention. 
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
DID(4)-U(  ) ETU
PRT(1)-U(  ) ETU (With Direct Indial subscribed)
BRT(4)-U(  ) ETU (With Direct Indial subscribed)
VRS(4)-U(  ) ETU (If...

July 2003 NEC Business Solutions Ltd
258 – D8Direct Inward Dialling (DID)
Doc. No. 8201 - Release 1.0
July 2003
change the ringing pattern (default: A) for an incoming DID call.
	Use Memory Block 2-09 (DID Limit to Tenant Assignment) to specify
the number of calls allowed to ring at a specified Tenant.
	Use Memory Block 3-14 (Tie Line Type Assignment) to assign loop
supervision for each trunk associated with a tie line to 2nd DIAL
(default), IMMEDIATE, DELAY or WINK.
	Use Memory Block 7-1 (Card Interface...

Xen IPK Features and Specifications Manual
Features and Specifications Manual D8 – 259
Doc. No. 8201 - Release 1.0
July 2003
	Incoming calls on Direct Inward Dialling lines follow Call Forward and
Station Hunting.
	Direct Inward Dialling calls can be routed to an ACD or UCD
Hunt group.
	A DID call does not activate External Tone Ringer or Night Chime.
	Incoming DID calls can be assigned for voice announcement from the
outside party system-wide.
	DNIS allows for display of name and number of the DID...

July 2003 NEC Business Solutions Ltd
260 – D8Direct Inward Dialling (DID)
Doc. No. 8201 - Release 1.0
July 2003
	The following DID Calls are counted against the number of total calls:
zA call that is placed on hold, transferred or conferenced.
zA call received by one Tenant and Transferred to another Tenant
counts against the first Tenant.
zA call that is received and disconnected.
Figure A8-1:  Direct Inward Dialling Operation