NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual C17 – 201
Doc. No. 8201 - Release 1.0
July 2003
Class of ServiceC-17
FEATURE 
DESCRIPTIONThe Class of Service assigns and controls access to features. Various
Class of Service Combinations can be programmed. Stations are then
assigned according to the features they can access.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURES
SERVICE 
CONDITIONS
Data Assignment
	Class of Service assignments have two types: Class of Service...

July 2003 NEC Business Solutions Ltd
202 – C17Class of Service
Doc. No. 8201 - Release 1.0
July 2003
General
	The following Attendant features can be allowed or denied in each
class for Class of Service assignment (Attendant) Feature Selection 1:
Features
Default Values 
(Station Ports 
01 & 02)
Night Mode Switching (System-Wide)
Allow
Night Mode Switching (Tenant)Allow
System Speed Dial ProgrammingAllow
Automatic Trunk-to-Trunk Transfer (Set/Reset) and 
Programming of Outgoing Numbers
Allow
Automated...

Xen IPK Features and Specifications Manual
Features and Specifications Manual C17 – 203
Doc. No. 8201 - Release 1.0
July 2003
The following features can be allowed/denied in each class level for
Class of Service (Station) Feature Selection 2 assignment.   
FeaturesDefault Value 
(All Stations)
Set/Cancel Call Forward 
– All Call, Do Not Disturb 
(DND), Break Mode
Allow
Trunk QueuingAllow
Automatic CallbackAllow
Barge-In Originate on a CO/PBX Line (Calling Party)Deny
Barge-In Receive (Called Party)Allow...

July 2003 NEC Business Solutions Ltd
204 – C17Class of Service
Doc. No. 8201 - Release 1.0
July 2003
	At default for Class of Service (Station) Feature Selection 2, Station
Class 00 is set to Allow most features. Station Classes 01~15 are set
to Deny all features.
	At default for Class of Service (Station) Feature Selection 2, all stations
are set for Class 00.
Unsupervised Conference  Deny
Account Code Forced/Verified Deny
Group Listening Selection Deny
Station Relocation Allow
Set Call Forward –...

Xen IPK Features and Specifications Manual
Features and Specifications Manual C17 – 205
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BTSClass of Service (Attendant) Feature Selection 1 1-8-07All used 
Line Keys
¶+BTSClass of Service (Station) Feature Selection 2 1-8-08All used
Line Keys
¶+BTTStation to Class of Service Feature Assignment 4-17 

July 2003 NEC Business Solutions Ltd
206 – C17Class of Service
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual C18 – 207
Doc. No. 8201 - Release 1.0
July 2003
Clock/Calendar DisplayC-18
FEATURE 
DESCRIPTIONThe Clock/Calendar Display is available on Multiline Display Terminals. This
feature displays the time and day of the week on the LCD. It is
programmable from the first two station ports in the system.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals with LCD.
Required Components
None.
OPERATING 
PROCEDURES
1. Press T.
2. Dial
I.
3. Dial 
L.
4. Dial current time...

July 2003 NEC Business Solutions Ltd
208 – C18Clock/Calendar Display
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSData Assignment
	The clock can be assigned to display 12 hours (12:00 to 11:59 AM,
12:00 to 11:59 PM) or 24 hours (00:00 to 23:59) system-wide via
System Programming (default: 12-hour clock).
Restrictions
	The Clock/Calendar Display is programmed only from station ports
01 and 02.
General
	The Clock/Calendar Display feature is protected by the memory
backup battery.
GUIDE TO...

Features and Specifications Manual C19 – 209
Doc. No. 8201 - Release 1.0
July 2003
Code RestrictionC-19
FEATURE 
DESCRIPTIONThe Code Restriction feature is an advanced system of restricting outgoing
calls based on the first eight digits dialled. Code Restriction denies outside
calls based on number dialled over a trunk group, and accommodates
equal access to Other Common Carriers (OCCs) as well as CO Feature
Codes. This eliminates unauthorised calls and configures system calling
functions to provide cost...

July 2003 NEC Business Solutions Ltd
210 – C19Code Restriction
Doc. No. 8201 - Release 1.0
July 2003
	When the system is installed behind a PBX or Centrex, the PBX/
Centrex Trunk Access Codes can be programmed in the system and
this code is ignored in the restriction table.
	The system automatically drops a call when the interdigit time duration
exceeds 10 seconds while the system is waiting for enough digits to
complete the call. This time can be disabled per station in Class of
Service (Station).
	At...