NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual D5 – 241
Doc. No. 8201 - Release 1.0
July 2003
Dialled Number
Identification Service 
(DNIS)
D-5
FEATURE 
DESCRIPTIONThe Dialled Number Identification Service (DNIS) feature allows the display
of name, extension number and caller ID (if available) for an incoming
DID call.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline terminals.
Required Components
DID(4)-U(  ) ETU (Cannot display Caller ID)
TLI(2)-( ) ETU (Cannot display Caller ID)
PRT(1)-U(  ) ETU (Can display...

July 2003 NEC Business Solutions Ltd
242 – D5 Dialled Number Identification Service (DNIS)
Doc. No. 8201 - Release 1.0
July 2003
	When a forwarding destination is set with Memory Block 1-1-23 (DID
Forward Station Number for Busy Station or Undefined digit), DNIS is
displayed only when the forwarding destination is busy. DNIS is not
displayed when the call is forwarded with an undefined digit.
	DNIS is not displayed for incoming ACD Plus calls.
	If two row Caller ID display is enabled, DNIS will block the...

Xen IPK Features and Specifications Manual
Features and Specifications Manual D5 – 243
Doc. No. 8201 - Release 1.0
July 2003
¶+BTS4 Class of Service (Station) Feature Selection 2
1-8-084-3,4-4,
5-7
¶+AlCaller ID Display Assignment for System Mode 1-1-78
¶+AICaller ID Display for CAR Key Assignment 4-49
¶+BTTStation to Class of Service Feature Assignment 4-17
¶+BTTTelephone to Tenant Assignment 4-09
¶+BNLine Key Selection 2-05
¶+BNLine Key Selection for Tenant Mode 2-06
¶+BTMLine Key Selection for...

July 2003 NEC Business Solutions Ltd
244 – D5 Dialled Number Identification Service (DNIS)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual D6 – 245
Doc. No. 8201 - Release 1.0
July 2003
Digit InsertionD-6
FEATURE 
DESCRIPTIONThe Digit Insertion feature provides user friendly operation when the system
is installed behind a PBX or Centrex Central Office. When a system user
originates an outgoing call, the system automatically inserts the PBX/
Centrex Trunk Access Code. This feature saves the user from dialling an
additional Access Code.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components...

July 2003 NEC Business Solutions Ltd
246 – D6Digit Insertion
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BA4Access Code (1-, 2-, 3-Digit) Assignment1-1-46/47/
48401 ~ 416
¶+BCTTrunk-to-Trunk Group Assignment 3-03
¶+BCS4Networking Trunk Group/Route Advance    
Assignment1-1-49
¶+BCS4CO/PBX Outgoing Digit Add Assignment1-1-50
4When the system is at default this...

Features and Specifications Manual D7 – 247
Doc. No. 8201 - Release 1.0
July 2003
Digital Voice MailD-7
FEATURE 
DESCRIPTIONThe VMS(2/4/8)-U( ) ETU or FMS(2/4)-U( ) ETU provides Digital
Voice Mail Service, Automated Attendant (AA), Audiotext, Fax Detection,
Message Notification, Live Recording and Live Monitoring. The VMS(2/4/8)-
U( ) ETU and FMS(2/4)-U( ) ETU are complete voice
mail applications (XenMail) built on a single ETU. This method has
advantages that include tighter application integration and...

July 2003 NEC Business Solutions Ltd
248 – D7Digital Voice Mail
Doc. No. 8201 - Release 1.0
July 2003
SYSTEM 
AVAILABILITYTerminal Type
All stations (available for all features except Live Recording).
Multiline Terminals (available for all features).
Required Components
VMS(2/4/8)-U(  ) ETU 
FMS(2/4)-U(  ) ETU
OPERATING 
PROCEDURES
1. Press T.
2. Press 
Q.
3. Press the Feature Access key.
4. Dial 
B.
5. Dial the Live Record feature code.
Feature codes are:
00 = Record
0A = Pause
0B = Rerecord
0C = Erase...

Xen IPK Features and Specifications Manual
Features and Specifications Manual D7 – 249
Doc. No. 8201 - Release 1.0
July 2003
5. Dial the Live Recording feature code.
Feature codes are:
00 = Record
0A = Pause
0B = Rerecord
0C = Erase
0D = End
0E= Urgent Page
0F = Address
6. Press 
T.
1. Lift handset and receive an internal dial tone.
2. Dial Voice Mail extension (wait for main greeting).
3. Dial 
I and the extension number.
4. Follow the verbal instructions to personalize the mailbox.
DIGITAL VOICE MAIL...

July 2003 NEC Business Solutions Ltd
250 – D7Digital Voice Mail
Doc. No. 8201 - Release 1.0
July 2003
LIVE RECORDING
1. To record an incoming CO/PBX conversation, go off-hook to answer
the call or, to record an outgoing CO/PBX conversation, place the call
lon hold and retrieve the call. Live Recording automatically starts.
RECORD is displayed in the lower section of the LCD on a Multiline
Te r m i n a l .
2. To store the recorded conversation in a different mailbox, dial a
mailbox number or press a...