NEC Xen Ipk Features And Specifications Manual

Xen IPK Features and Specifications Manual
Features and Specifications Manual C19 – 211
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+AC4Code Restriction Class Assignment (Day Mode)4-07
¶+AC4Code Restriction Class Assignment (Night 
Mode)4-08
¶+BNTrunk to Tenant Assignment 2-01
¶+BCTTrunk-to-Trunk Group Assignment 3-03
¶+BCTTrunk Type Selection 3-91
¶+BAPBX/CTX...

July 2003 NEC Business Solutions Ltd
212 – C19Code Restriction
Doc. No. 8201 - Release 1.0
July 2003
¶+BTS4Class of Service (Station) Feature Selection 21-8-08 3-7
¶+BTT
Station to Class of Service Feature Assignment 4-17
¶+ACCO Feature Code Service for Code Restriction 1-1-82
4When the system is at default this Memory Block must be programmed for the feature to be used.
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key 

Features and Specifications Manual C20 – 213
Doc. No. 8201 - Release 1.0
July 2003
Code Restriction 
Password OverrideC-20
FEATURE 
DESCRIPTIONBy entering a password, the code restriction settings at a station can be
overridden and dialling allowed according to new code restriction settings
associated with the password which was entered. The password consists of
three elements, Access Code + ID Number + ID Password. The ID
password portion is optional. Entering the password changes the code
restriction...

July 2003 NEC Business Solutions Ltd
214 – C20 Code Restriction Password Override
Doc. No. 8201 - Release 1.0
July 2003
 
1. Lift the handset to receive internal dial tone.
2. Dial the Confirm ID Password Access Code (not set at default).
3. Dial your ID Number.
4. Current ID Password is displayed.
5. Hang up.
1. Lift the handset to receive internal dial tone.
2. Dial the Reset ID Password Access Code (not set at default).
3. Dial your ID Number.
4. Hang up.
SERVICE 
CONDITIONSData Assignments
	Use...

Xen IPK Features and Specifications Manual
Features and Specifications Manual C20 – 215
Doc. No. 8201 - Release 1.0
July 2003
	Use Memory Block 1-9-03 (ID Code Restriction Class Assignment -
Day Mode) and 1-9-04 (ID Code Restriction Class Assignment - Night
Mode) to specify the day and night mode code restrictions classes for
each ID number.
	Use Memory Block 4-26 (DISA ID Number Station Assignment) to
assign the Direct Inward System Access (DISA) ID Buffer Number
corresponding to the station port...

July 2003 NEC Business Solutions Ltd
216 – C20 Code Restriction Password Override
Doc. No. 8201 - Release 1.0
July 2003
	When an Override call is originated, the code restriction settings in MB
1-9-03 and MB 1-9-04 take precedence over the settings in MB 4-07
and MB 4-08, for the next call only.
	Code restriction settings revert to those assigned in MB 4-07 and MB
4-08 once the call is ended.
	The ID Number will be printed in SMDR records in place of the
Extension Number feature when this is used.
	When...

Features and Specifications Manual C21 – 217
Doc. No. 8201 - Release 1.0
July 2003
CO/PBX, Tie Line 
Digit RestrictionC-21
FEATURE 
DESCRIPTIONThe CO/PBX, Tie Line Digit Counting feature restricts the number of digits
that can be dialled from a station on an outside line. This can be used to
eliminate unauthorised calls.
SYSTEM
AVAILABILITYTerminal Type
All stations.
Required Components
None.
OPERATING 
PROCEDURES
SERVICE 
CONDITIONS
Data Assignment
	The maximum number of digits is determined in System...

July 2003 NEC Business Solutions Ltd
218 – C21 CO/PBX, Tie Line Digit Restriction
Doc. No. 8201 - Release 1.0
July 2003
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
C-19 Code Restriction
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BTT4Trunk Digit Restriction4-32
¶+AC4Code Restriction Class Assignment (Day Mode)4-07
¶+AC4Code Restriction Class Assignment (Night 
Mode)4-08
¶+ACTie Line Code...

Features and Specifications Manual C22 – 219
Doc. No. 8201 - Release 1.0
July 2003
Computer Telephony 
Integration (CTI)C-22
FEATURE 
DESCRIPTIONCTI is an advanced terminal feature that allows a PC and its TAPI compliant
software application to connect to the Xen IPK system. The Xen IPK system
provides all station information to the PC, called a CTI Terminal, that it
normally provides to a digital Multiline Terminal. The synergy provided by
the CTI Terminal and Xen IPK system is limited only by the...

July 2003 NEC Business Solutions Ltd
220 – C22 Computer Telephony Integration (CTI)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK