NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual C23 – 221
Doc. No. 8201 - Release 1.0
July 2003
Consecutive Speed DialC-23
FEATURE 
DESCRIPTIONThe Consecutive Speed Dial feature provides for the use of System Speed
Dial, Station Speed Dial, and manual dialling for all stations consecutively.
Complicated dialling sequences are simplified. This feature eases access to
secondary common carriers, credit card verification, and any application
that requires entry of groups of numbers such as authorisation codes or
customer...

July 2003 NEC Business Solutions Ltd
222 – C23Consecutive Speed Dial
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual C24 – 223
Doc. No. 8201 - Release 1.0
July 2003
Cordless Telephone 
ConnectionC-24
FEATURE 
DESCRIPTIONWith an AP(R) or AP(A) Adapter installed, a cordless telephone can be
connected to a Multiline Terminal. System Programming defines whether or
not the cordless telephone rings when calls are directed to the Multiline
Terminal associated with it. The SLI(8)-U( ) ETU also supports cordless
telephones, but this feature refers to Multiline Terminal cordless connection....

July 2003 NEC Business Solutions Ltd
224 – C24Cordless Telephone Connection
Doc. No. 8201 - Release 1.0
July 2003
1. Single Line Telephone user goes off-hook (at this time, the call is
automatically connected to the Single Line Telephone).
2. Multiline Terminal user goes on-hook.
Refer to operation for Single Line Telephone Access.
SERVICE 
CONDITIONSData Assignment
	Use Memory Block 4-39 (APR Ring Mode Assignment) to specify NON
(no ring), STA (ring Station Number only), or ALL (ring all stations) for...

Xen IPK Features and Specifications Manual
Features and Specifications Manual C24 – 225
Doc. No. 8201 - Release 1.0
July 2003
	The Multiline Terminal LCD displays normal information for Multiline
Terminal when a cordless terminal is used.
	If the Multiline Terminal user goes off-hook before the cordless Single
Line Telephone user, a PBR circuit is not connected for the cordless
Single Line Telephone.
	The cordless telephone must be installed within 3 metres of the APR/
APA Adapter.
	A Hookflash can be...

July 2003 NEC Business Solutions Ltd
226 – C24Cordless Telephone Connection
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual C25 – 227
Doc. No. 8201 - Release 1.0
July 2003
Customised MessageC-25
FEATURE 
DESCRIPTIONA station with Do Not Disturb set can select a Customised Message that is
displayed at any other Multiline Display Terminal when an internal call is
made to the DND station. The message remains displayed on the LCD of
the Multiline Terminal where the message was set. Ten different messages
can be set in System Programming.
SYSTEM
AVAILABILITYTerminal Type
All Multiline Terminals...

July 2003 NEC Business Solutions Ltd
228 – C25Customised Message
Doc. No. 8201 - Release 1.0
July 2003
1. Press T.
2. Dial 
GI.
3. Press 
T.
SERVICE 
CONDITIONSData Assignment
	A maximum of 10 messages can be programmed in System
Programming.
General
	Six messages are provided in default, however, all 10 can be
programmed.
	Default messages are as follows:
zDon’t Disturb
zMeeting
zBusiness Trip
zNot In
zWith Guest
zOut of Office
	The message remains displayed on the LCD of the Multiline Terminal
where...

Xen IPK Features and Specifications Manual
Features and Specifications Manual C25 – 229
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BICustomised Message 1~10 Assignment 1-2-09~18
¶+BTSClass of Service (Station) Feature Selection 2 1-8-08 1-1, 2-1
¶+BTTStation to Class of Service Feature Assignment 4-17 

July 2003 NEC Business Solutions Ltd
230 – C25Customised Message
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK