NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual D1 – 231
Doc. No. 8201 - Release 1.0
July 2003
Data Line SecurityD-1
FEATURE 
DESCRIPTIONThe Data Line Security feature protects any station port from receiving
audible tones (such as Camp-On or Override tones) and denies a station
from barging in while busy. It prevents disruption of data transmission when
using a modem or fax (facsimile) machine.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURE
SERVICE 
CONDITIONS
Data...

July 2003 NEC Business Solutions Ltd
232 – D1Data Line Security
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BTT4SLT Data Line Security Assignment4-90
¶+BTSClass of Service (Station) Feature Selection 2 1-8-08 3-8
¶+BTTStation to Class of Service Feature Assignment 4-17
4When the system is at default this Memory Block must be programmed for the feature to be used. 

Features and Specifications Manual D2 – 233
Doc. No. 8201 - Release 1.0
July 2003
Delay AnnouncementD-2
FEATURE 
DESCRIPTIONThe Delay Announcement feature activates when an incoming call to an
Automatic Call Distribution (ACD) or Uniform Call Distribution (UCD) group
encounters all ACD/UCD stations busy or receives no answer within a
preprogrammed time. The call is queued and receives a recorded
announcement after a predetermined time. Multiple Delay Announcements
(first and second) are available. The...

July 2003 NEC Business Solutions Ltd
234 – D2Delay Announcement
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSData Assignment
	The announcements each have predetermined programmable times.
Each Delay Announcement Start Timer and Release Timer are also
programmable.
1. First Delay Announcement, number of repetitions/times (1~8
times).
2. Time between First and Second Delay Announcement [default: 20
sec. (0~60 sec., Infinity)].
3. Second Delay Announcement, number of repetitions/times (1~8...

Xen IPK Features and Specifications Manual
Features and Specifications Manual D2 – 235
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-
Line Key
¶+BSCard Interface Slot Assignment 7-1
¶+AR4VRS Message Recording Time Selection1-8-12
¶+AR4VRS Message Function Assignment1-8-13
¶+BA4Access Code (1-, 2-, 3-Digit) Assignment1-1-46/47/48 501
¶+BTSClass of Service (Station) Feature...

July 2003 NEC Business Solutions Ltd
236 – D2Delay Announcement
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual D3 – 237
Doc. No. 8201 - Release 1.0
July 2003
Delayed RingingD-3
FEATURE 
DESCRIPTIONThe Delayed Ringing feature allows a secondary answering positions to
ring on incoming calls after a programmed time interval. This feature applies
to CO/PBX lines, Secondary Incoming Extensions, and Call Arrival Keys.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Receive delayed incoming ring.
2. Answer the call in the standard...

July 2003 NEC Business Solutions Ltd
238 – D3Delayed Ringing
Doc. No. 8201 - Release 1.0
July 2003
	Single Line Telephone users can receive CO/PBX Delayed Ringing.
	Delayed Ringing is provided to a terminal that is off-hook and is
assigned for Off-Hook Ringing.
	Single Line Telephones assigned Delay Ringing follow Station Hunting.
	When a CO line is assigned DIT/ANA to a station that also has Delay
Ringing assigned, the DIT/ANA does not occur until the Delay Ringing
Timer expires.
RELATED 
FEATURES LIST...

Features and Specifications Manual D4 – 239
Doc. No. 8201 - Release 1.0
July 2003
Dial 9 For AttendantD-4
FEATURE 
DESCRIPTIONStations can access a system Attendant Position by dialling 9.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Lift the handset or pressPand receive internal dial tone.
2. Dial
Ito call the Attendant (set at default).
3. Lift the handset to talk with Attendant.
1. Lift the handset, and receive internal dial tone.
2. Dial
Ito call...

July 2003 NEC Business Solutions Ltd
240 – D4Dial 9 For Attendant
Doc. No. 8201 - Release 1.0
July 2003
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
A-11 Attendant Add-On Console
A-13 Attendant Positions
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BAAccess Code (1-Digit) Assignment 1-1-46 176
¶+BASpecified Station Access Code Assignment 1-2-08