NEC Xen Ipk Features And Specifications Manual

Xen IPK Features and Specifications Manual
Features and Specifications Manual D14 – 281
Doc. No. 8201 - Release 1.0
July 2003
	When DND is set, a Customised Message is displayed in the LCD (if
equipped) of the Multiline Terminal. The user can select any of the 10
messages assigned in System Programming.
	Internal calls to a station in DND result in a Call Waiting Tone. The
LCD on the calling party Multiline Terminal displays a Customised
Message indicating the called party is unavailable.
RELATED...

July 2003 NEC Business Solutions Ltd
282 – D14Do Not Disturb (DND)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual D15 – 283
Doc. No. 8201 - Release 1.0
July 2003
Door Lock Release RelaysD-15
FEATURE 
DESCRIPTIONDoor Lock Release Relays are provided by the DPH(4)-U(  ) ETU. While a
station user is talking to a Doorphone, an Access Code can be dialled to
operate the relay associated with that Doorphone. Each Doorphone has a
relay associated with it and the relay can only be operated while talking to
the Doorphone. 
The door lock release relay break time can be controlled by the...

July 2003 NEC Business Solutions Ltd
284 – D15Door Lock Release Relays
Doc. No. 8201 - Release 1.0
July 2003
	The relay is controlled by the last entry. For example, 5 was dialled (8
seconds) then 9 is dialled. One can expect the relay to remain active
for 15 more seconds.
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
D-16 Door/Monitor Telephone
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BNCard...

Features and Specifications Manual D16 – 285
Doc. No. 8201 - Release 1.0
July 2003
Door/Monitor TelephoneD-16
FEATURE 
DESCRIPTIONThe Xen IPK system supports up to four Door/Monitor telephones. A
Doorphone can be called by a station or a station (or number of stations)
can be signalled when a Doorphone call button is pressed. When a station
answers the Doorphone ringing, a two-way speech path is established. 
In addition to the Doorphone ringing assignment, both the tone and
cadence of Doorphone ringing...

July 2003 NEC Business Solutions Ltd
286 – D16Door/Monitor Telephone
Doc. No. 8201 - Release 1.0
July 2003
Doorphone user.
SERVICE 
CONDITIONSRestrictions
	Doorphone Ringing cannot be assigned to Single Line Telephones.
This includes Single Line Telephones supported by analogue port
adapters.
General
	Two speech paths are available for Doorphones. Doorphones 1 and 3
share a speech path and Doorphones 2 and 4 share a speech path.
When one Doorphone is busy the speech path is also busy.
Doorphone Ringing...

Features and Specifications Manual D17 – 287
Doc. No. 8201 - Release 1.0
July 2003
DP to DTMF SwitchingD-17
FEATURE 
DESCRIPTIONThis feature is used for systems connected to Dial Pulse (DP) trunks that
require communication with computers that demand DTMF signalling.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
TLI(2)-U(  ) ETU, COI(  )-U(  ) ETU, COID(  )-U(  ) ETU
OPERATING 
PROCEDURES
1. Dial J and L.
2. Dial desired number.
SERVICE 
CONDITIONSRestrictions
	Dial Pulse...

July 2003 NEC Business Solutions Ltd
288 – D17DP to DTMF Switching
Doc. No. 8201 - Release 1.0
July 2003
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMING
THIS PAGE INTENTIONALLY LEFT BLANKFeature 
NumberFeature Name
E-3 E&M Tie Lines (4-Wire)
S-6 Single Line Telephone Access
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BSCard Interface Slot Assignment 7-1
¶+BCTTrunk (Installed, DP/DTMF) Selection 3-92 

Features and Specifications Manual D18 – 289
Doc. No. 8201 - Release 1.0
July 2003
Drop KeyD-18
FEATURE 
DESCRIPTIONThe Drop Key abandons a call while retaining the PBX/Centrex line for
originating another call. The Drop Key is provided by programming a
Feature Access or One-Touch key. This feature allows the Recall key to be
used to provide a hookflash to the PBX or Central office.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. PressT.
2....

July 2003 NEC Business Solutions Ltd
290 – D18Drop Key
Doc. No. 8201 - Release 1.0
July 2003
1. Press the Feature Access or One-Touch key programmed as a
Drop key.
2. Receive new CO/PBX dial tone.
3. Dial the desired number.
SERVICE 
CONDITIONSRestrictions
	The Drop key provides a timed disconnect signal on CO/PBX lines.
The time of a disconnect signal is fixed at 1.5 seconds, and cannot be
changed by System Programming.
	The Drop key cannot be used for internal, DID, or Tie line calls.
General
	When on...