NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual E2 – 301
Doc. No. 8201 - Release 1.0
July 2003
Electronic Volume ControlE-2
FEATURE 
DESCRIPTIONElectronic Volume Control is provided on all Multiline Terminals. This allows
for easy changes to the LCD contrast on Multiline Display Terminals, Off-
Hook Ringing volume, Station Ringing volume, and Handset/Station
Speaker volume control.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Go off-hook by pressing P....

July 2003 NEC Business Solutions Ltd
302  - E2Electronic Volume Control
Doc. No. 8201 - Release 1.0
July 2003
1. Go off-hook by pressing P.
2. Dial Access Code
F0 (default).
3. Dial 
A from the dial pad.
4. Press 
M(^ = higher) or (v = lower) during ringing to increase/decrease
ringing volume.
5. Go on-hook.
1. Go off-hook with the handset.
2. Press
M(^ = higher) or (v = lower) to increase/decrease handset
receiver volume.
1. Go off-hook by pressing 
P.
2. Press
M(^ = higher) or (v = lower) to...

Xen IPK Features and Specifications Manual
Features and Specifications Manual E2 - 303
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-
Line Key1-8-08
Station
Page-
Line Key
¶+BTT4Access Code (1-, 2-, or 3-Digit) Assignment1-1-46/47/
48049
¶+BTTReceiving Volume Selection 4-92 

July 2003 NEC Business Solutions Ltd
304  - E2Electronic Volume Control
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual E3 – 305
Doc. No. 8201 - Release 1.0
July 2003
E&M Tie Lines (4-Wire)E-3
FEATURE 
DESCRIPTIONE&M Tie Lines (4-Wire) can be connected to the system. Tie lines provide
access to and from remote systems and facilities. The system can receive
and/or transmit DTMF or Dial Pulse signals on E&M Tie Lines.
SYSTEM 
AVAILABILITYTerminal Type
All terminals
Required Components
TLI(2)-U(  ) ETUs
OPERATING 
PROCEDURES
1. Dial the Trunk Group Access Code assigned for E&M Tie Lines.
2....

July 2003 NEC Business Solutions Ltd
306  - E3E&M Tie Lines (4-Wire)
Doc. No. 8201 - Release 1.0
July 2003
	Internal and External Transmit and Receive pad adjustments (volume
levels) are programmable in System Programming.
	An unanswered Tie/DID call can be switched to a different ringing
pattern and ring selected stations by using the Day or Night Mode
ringing assignment, if assigned, in System Programming. The
switching options are 10, 20, 30 seconds, or No Timeout (default: No
Timeout).
	Tie/DID lines...

Xen IPK Features and Specifications Manual
Features and Specifications Manual E3 - 307
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BSCard Interface Slot Assignment 7-1
¶+BCTTrunk Type Selection 3-91
¶+BCTTrunk (Installed, DP/DTMF) Selection 3-92
¶+BCTTrunk-to-Trunk Group Assignment 3-03
¶+ALTTie Line Type Assignment 3-14
¶+BCTTrunk DTMF Duration/Interdigit...

July 2003 NEC Business Solutions Ltd
308  - E3E&M Tie Lines (4-Wire)
Doc. No. 8201 - Release 1.0
July 2003
¶+BCTTrunk Internal Receive Pad Selection 3-30
¶+BCTTrunk External Transmit Pad Selection 3-31
¶+BCTTrunk External Receive Pad Selection 3-32
¶+ALTTie Line Dial Tone Selection 3-27
¶+ALTTie Line Reorder Tone Selection 3-28
¶+BTTCO/PBX Ring Assignment (Day Mode) 4-01
¶+BTTCO/PBX Ring Assignment (Night Mode) 4-02
¶+BTTTrunk Digit Restriction 4-32
Order
and
Shortcut
System Data NameMemory...

Features and Specifications Manual E4 – 309
Doc. No. 8201 - Release 1.0
July 2003
Equal Access 
AccommodationE-4
FEATURE
DESCRIPTIONThe Equal Access Accommodation feature permits Speed Dial memories
and Code Restriction to be applied to CO/PBX lines that provide access to
Specialised Common Carriers (SCCs).
SYSTEM 
AVAILABILITYTerminal Type
All terminals
Required Components
None
OPERATING 
PROCEDURES
1. Press an outside line key.
2. Dial Equal Access Code 
A0 + XXX. Equal Access inspection is
applied.
3....

July 2003 NEC Business Solutions Ltd
310  - E4Equal Access Accommodation
Doc. No. 8201 - Release 1.0
July 2003
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
C-19 Code Restriction
C-21 CO/PBX, Tie Line Digit Restriction
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+ACOCC Table Assignment 1-1-67
¶+ACOCC Table to Trunk Group Assignment 5-03
¶+AC8-Digit Matching Table to OCC Table Assignment 1-1-68...