NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual I4 – 361
Doc. No. 8201 - Release 1.0
July 2003
Internal Voice/Tone 
SignallingI-4
FEATURE 
DESCRIPTIONThe Internal Voice/Tone Signalling feature allows Multiline Terminal users to
be signalled on incoming internal calls by voice announcement or by
ringing, depending on System Programming. The caller can dial an
additional digit to switch a voice announcement call to a ringing call, or
switch a ringing call to voice announcement. This feature allows Voice/Tone
switching...

July 2003 NEC Business Solutions Ltd
362 – I4Internal Voice/Tone Signalling
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSData Assignment
	Voice/Tone or Tone/Voice is assigned in System Programming system-
wide (default: voice/tone call).
Restrictions
	Single Line Telephone users can voice announce to Multiline Terminal
users but cannot receive voice announcements.
General
	The Access Code used to change from a voice call to a tone call, or
from a tone call to a voice call, can be changed in...

Features and Specifications Manual I5 – 363
Doc. No. 8201 - Release 1.0
July 2003
Intercom FunctionI-5
FEATURE 
DESCRIPTIONThis feature allows all internal extensions to call each other without
accessing the telephony network.
There are three ways to generate an intercom call.
1. Using speaker key when Prime Line (refer to P5 of this document) or
Hot Line (refer to H6 of this document) is not set.
2. Using a Intercom key programmed into the Multiline Terminal.
3. Pressing 
T followed by the P key on a...

July 2003 NEC Business Solutions Ltd
364 – I5Intercom Function
Doc. No. 8201 - Release 1.0
July 2003
1. Lift the handset or press P.
2. Press the pre-programmed ICM key.
3. Receive intercom dial tone.
4. Dial extension number
.
1. Lift the handset or press 
T.
2. Press 
P.
3. Receive intercom dial tone, an intercom extension call or directed
trunk call (DIT termination, AA termination or DID).
4. Dial extension number.
1. Lift the handset or press 
P.
2. Press the 
S key.
3. Receive intercom dial tone....

Xen IPK Features and Specifications Manual
Features and Specifications Manual I5 – 365
Doc. No. 8201 - Release 1.0
July 2003
	With a call in progress (internal or trunk call) the user can terminate
the existing call and start an intercom call by pressing 
T,Por
the pre-programmed Intercom key.
	A call from the door phone can be answered by pressing 
T,P
or the pre-programmed Intercom key. 

July 2003 NEC Business Solutions Ltd
366 – I5Intercom Function
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual I6 – 367
Doc. No. 8201 - Release 1.0
July 2003
Internal Zone Paging 
(Meet Me)I-6
FEATURE 
DESCRIPTIONThe Internal Zone Paging feature allows for up to three zones of internal
paging. The zones, consisting of Multiline Terminals, can be paged
individually or all zones can be paged at once. Any station user can answer
the page and speak privately to the originator of the page with the Meet-Me
feature.
SYSTEM 
AVAILABILITYTerminal type
All terminals.
Required Components...

July 2003 NEC Business Solutions Ltd
368 – I6Internal Zone Paging (Meet Me)
Doc. No. 8201 - Release 1.0
July 2003
1. PressP or lift the handset.
2. Dial Access Code 
EJ (set as default).
3. Use the handset to talk with party.
SERVICE 
CONDITIONSData Assignment
	Internal Zone Page times out after 90 seconds (set as default).
Timeout options include 90 seconds, 120 seconds, or No Timeout.
Restrictions
	Multiline Terminal users do not receive internal pages when already
engaged in a call.
General...

Xen IPK Features and Specifications Manual
Features and Specifications Manual I6 – 369
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BAAccess Code (1-, 2-, or 3-Digit) Assignment1-1-46/47/
48070 ~ 074,
081
¶+BTM4Internal Zone Paging Selection4-93
¶+BTTReceiving Internal/All Call Page Selection 4-31
¶+BPInternal Paging Alert Tone Selection 1-2-25
¶+BPInternal...

July 2003 NEC Business Solutions Ltd
370 – I6Internal Zone Paging (Meet Me)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK