NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual P11 – 473
Doc. No. 8201 - Release 1.0
July 2003
Push Button Dial - 
DTMF or DPP-11
FEATURE 
DESCRIPTIONThe Push Button Dial - DTMF or DP feature is provided on all Single Line
Telephones and outside lines. Tie Lines are assigned per trunk to generate
either Dual-Tone Multifrequency (DTMF) or Dial Pulse (DP) dialling signals.
SYSTEM 
AVAILABILITYTerminal Type
All terminals with a push button dial pad.
Required Components
TLI(2)-U(  ) ETU
OPERATING 
PROCEDURES
SERVICE...

July 2003 NEC Business Solutions Ltd
474 – P11Push Button Dial - DTMF or DP
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual Q1 – 475
Doc. No. 8201 - Release 1.0
July 2003
Quick Transfer to 
Voice MailQ-1
FEATURE 
DESCRIPTIONA station user trying to transfer a call can force the call to be transferred to
the called party voice mail box. The transfer can be made after the
transferred call recalls or while performing a screened transfer to the
internal station.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals may perform both types of operations.
Single line telephones may perform the...

July 2003 NEC Business Solutions Ltd
476 – Q1Quick Transfer to Voice Mail
Doc. No. 8201 - Release 1.0
July 2003
1. Make the intercom call.
2. Dial the Quick Transfer Access Code (default: 
G).
3. Leave a voice mail message.
4. Hang up.
SERVICE 
CONDITIONSData Assignment
	A Voice Mail Master Number must be assigned in Memory Block
1-8-26 in System Programming.
Restrictions
	The Quick Transfer to Voice Mail is not allowed when caller is:
zListening to the busy tone (BT)
zTalking on an internal line...

Xen IPK Features and Specifications Manual
Features and Specifications Manual Q1 – 477
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BAIntercom Feature Access Code Assignment 1-2-24 007
¶+AV4Voice Mail Quick Transfer Master Hunt 
Number1-8-26
4When the system is at default this Memory Block must be programmed for the feature to be used. 

July 2003 NEC Business Solutions Ltd
478 – Q1Quick Transfer to Voice Mail
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual R1 – 479
Doc. No. 8201 - Release 1.0
July 2003
Recall KeyR-1
FEATURE 
DESCRIPTIONThe Recall key feature either generates a hookflash to access features
provided by the outside exchange or abandons a call while retaining the
CO/PBX line for another call. Each Multiline Terminal is equipped with a
Recall key. The function of this key is set in System Programming.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
1....

July 2003 NEC Business Solutions Ltd
480 – R1Recall Key
Doc. No. 8201 - Release 1.0
July 2003
	If you press the Recall key at an LCR station during a conversation
with an outside party and the trunk is assigned as a CO Trunk (using
Trunk Type Assignment Memory Block 3-91), the following occurs:
zThe current call is dropped.
zA new Least Cost Routing dial tone is heard.
zStation Message Detail Recording starts again.
zCode Restriction starts again.
	If you press the Recall key during a conversation with...

Xen IPK Features and Specifications Manual
Features and Specifications Manual R1 – 481
Doc. No. 8201 - Release 1.0
July 2003
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
C-17 Class of Service
D-18 Drop Key
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BCM4Hookflash Time Selection1-1-02
¶+BTISLT Hookflash Signal Selection 1-3-02
¶+BAAccess Code (1, 2-, 3--Digit) Assignment1-1-46/47/
48029...

July 2003 NEC Business Solutions Ltd
482 – R1Recall Key
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK