NEC Xen Ipk Features And Specifications Manual

Xen IPK Features and Specifications Manual
Features and Specifications Manual S10 – 523
Doc. No. 8201 - Release 1.0
July 2003
1. Press the desired Feature Access or One-Touch key.
1. Lift the handset, and receive internal dial tone.
2. Dial the Station Speed Dial Access Code (default: 
J).
3. Dial the Station Speed Dial buffer number (
H0~II).
4. Talk with the called party.
SERVICE 
CONDITIONSData Assignment
	An 80 or 1000 System Speed Dial is Assigned in System
Programming. 
General
	A maximum of 24...

July 2003 NEC Business Solutions Ltd
524 – S10Speed Dial – Station
Doc. No. 8201 - Release 1.0
July 2003
	Multiline Terminals with an LCD display can verify Station Speed Dial
buffer contents by pressing the Conference key, then the Redial key,
and then dialling the Station Speed Dial buffer (80~99).
	Multiline Terminals with an LCD display can verify Station Speed Dial
buffer contents programmed on a Feature Access or One-Touch key
by pressing the Feature key and then pressing the Feature Access or...

Features and Specifications Manual S11 – 525
Doc. No. 8201 - Release 1.0
July 2003
Speed Dial Stored 
CharactersS-11
FEATURE 
DESCRIPTIONEach Multiline Terminal in the system may be assigned 20 Station Speed
Dial buffers. Depending on System Programming, if 1000 additional System
Speed Dial numbers are assigned, the stations do not have Station Speed
Dial. Station Speed Dial buffers may contain a maximum of 24 digits and 13
alphanumeric characters for storing a name associated with the number.
SYSTEM...

July 2003 NEC Business Solutions Ltd
526 – S11Speed Dial Stored Characters
Doc. No. 8201 - Release 1.0
July 2003
6. Dial the desired telephone number.
7. Press
U, and enter a name using the dial pad character codes.
8. Press
T.
1. Press
T.
2. Press
Q.
3. Dial the System Speed Dial buffer number to be programmed
(
00~GI or 000~III). 
4. Dial the Trunk or Trunk Group Access Code (maximum four digits).
5. Dial the desired telephone number.
6. Press
U, and enter a name using the dial padcharacter codes.
7....

Xen IPK Features and Specifications Manual
Features and Specifications Manual S11 – 527
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSData Assignment
	The 80 or 1000 Speed Dial Mode is Assigned in System
Programming.
	In System Programming, the name can be assigned to be displayed
first, followed by the number dialled, or the number dialled followed by
the name (default: number dialled first, then the name).
Restrictions
	One-Touch keys, programmed as Station Speed Dial, cannot have a
name...

July 2003 NEC Business Solutions Ltd
528 – S11Speed Dial Stored Characters
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Table 2-1  Dial Pad Character Assignment
Key Press
Button 1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 11th 12th 13th 14th
11@[¥]^_‘{l}
äâBack to 1
2 A B C a b c 2 Back to A
3 D E F d e f 3 Back to D
4 G H I g h i 4 Back to G
5 J K L j k l 5 Back to J
6 M N O m n o 6 Back to M
7 P Q R S p q r s 7 Back to P
8 T U V t u v 8 Back to T
9 W X YZwxyz9Back to W
0 0 !  # $ %...

Features and Specifications Manual S12 – 529
Doc. No. 8201 - Release 1.0
July 2003
Speed Dial – SystemS-12
FEATURE 
DESCRIPTIONAttendant Positions can be used to program up to 1000 System Speed Dial
memories or 80 System Speed Dial memories that provide shared access
by all stations. System Speed Dial memories may be set to override or not
override code restriction assignments in groups of 10 or 100.
When 80 system speed dial buffers are allowed, each station user has an
additional 20 station speed dial...

July 2003 NEC Business Solutions Ltd
530 – S12Speed Dial – System
Doc. No. 8201 - Release 1.0
July 2003
1. Press the desired Feature Access or One-Touch key.
1. Lift the handset, and receive internal dial tone.
2. Dial the Speed Dial Access Code (default: 
J).
3. Dial the System Speed Dial buffer number (use 
00~GI or
000~III.
4. Talk with called party.
SERVICE 
CONDITIONSData Assignment 
	Class of Service assignment allows station users to program System
Speed Dial buffers.
	The 80 or 1000 System Speed...

Xen IPK Features and Specifications Manual
Features and Specifications Manual S12 – 531
Doc. No. 8201 - Release 1.0
July 2003
	A pause, hookflash, 4, and # may be programmed into a System
Speed Dial buffer. Each item is counted as a digit, except the Trunk
and Trunk Group Access Code.
	The built-in battery backup on the CPUI(  )-U(  ) ETU retains System
Speed Dial memories if power fails.
	To verify System Speed Dial buffer contents, press the Conference
key, then the Redial key, and then dial the System...

July 2003 NEC Business Solutions Ltd
532 – S12Speed Dial – System
Doc. No. 8201 - Release 1.0
July 2003
¶+BTSClass of Service (Attendant) Feature Selection 1 1-8-07 1-3
¶+BTTStation to Class of Service Feature Assignment 4-17
¶+ACSystem Speed Dial Override by Class Selection 1-1-62
¶+BNSystem Speed Dial Display Assignment 2-07
¶+BAAccess Code (1-, 2-, or 3-Digit) Assignment1-1-46/47/
48090, 095
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station...