NEC Xen Ipk Features And Specifications Manual

Xen IPK Features and Specifications Manual
Features and Specifications Manual S15 – 543
Doc. No. 8201 - Release 1.0
July 2003
¶+ASSMDR Incoming/Outgoing Print Selection 1-5-26
¶+ASSMDR Valid Call Time Assignment 1-5-25
¶+ASSMDR Print Format 1-5-02
¶+CSSCOM Port Baud Rate Setting Assignment 1-8-35
¶+BMStart Time Selection 1-1-05
¶+ASSMDR Telephone Print Selection 4-56
4When the system is at default this Memory Block must be programmed for the feature to be used.
Order
and
Shortcut
System Data NameMemory...

July 2003 NEC Business Solutions Ltd
544 – S15 Station Message Detail Recording (SMDR)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual S16 – 545
Doc. No. 8201 - Release 1.0
July 2003
Station Name/Number 
DisplayS-16
FEATURE 
DESCRIPTIONThis feature allows a Multiline Telephone to display on its LCD its name
and/or station number.  These are displayed while the telephone is idle.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals with an LCD.
Required Components 
None.
OPERATING 
PROCEDURESData Assignment
	Use Memory Block 4-61 (Extension Name/Number Display Selection)
to specify the type of...

July 2003 NEC Business Solutions Ltd
546 – S16Station Name/Number Display
Doc. No. 8201 - Release 1.0
July 2003
	The station number and/or name is positioned to the left side of the
LCD. When both number and name are to be displayed, space(s) are
provided between the number and name. Examples of these are
indicated below:
RELATED 
FEATURES LIST
Number only: 100
Name only: NAME
Number and Name:
2 digit Station No.:10 NAME
3 digit Station No.:100 NAME
4 digit Station No.:1000 NAME
Feature 
NumberFeature...

Features and Specifications Manual S17 – 547
Doc. No. 8201 - Release 1.0
July 2003
Station Outgoing LockoutS-17
FEATURE 
DESCRIPTIONThis feature allows a station user to temporarily restrict outgoing calls by
assigning a personal code (password).
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Go off-hook; receive internal dial tone.
2. Dial Password set Access Code. (Not set at default.)
3. Dial the Password Code 
0000000000 (set as
default).
4....

July 2003 NEC Business Solutions Ltd
548 – S17Station Outgoing Lockout
Doc. No. 8201 - Release 1.0
July 2003
1. Go off-hook; receive internal dial tone.
2. Dial Password change Access Code. (Not set at default).
3. Dial current Password Code.
4. Enter new Password Code.
5. Hang up.
SERVICE 
CONDITIONSData Assignment
	Telephone Password can be allowed or disallowed by Station Class of
Service.
	The ability to cancel Telephone Password and default a station
password is allowed or disallowed by Attendant...

Xen IPK Features and Specifications Manual
Features and Specifications Manual S17 – 549
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BTSClass of Service (Attendant) Feature Selection 1 1-8-07 2-4
¶+BTSClass of Service (Station) Feature Selection 2 1-8-08 2-3
¶+BTTStation to Class of Service Feature Assignment 4-17
¶+BA4Access Code (1-, 2-, or 3-Digit)...

July 2003 NEC Business Solutions Ltd
550 – S17Station Outgoing Lockout
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual S18 – 551
Doc. No. 8201 - Release 1.0
July 2003
Station RelocationS-18
FEATURE 
DESCRIPTIONThe Station Relocation feature enables a station to be moved from one
location to another without reprogramming the station data. The station set
of features and extension numbers is the same after it has been moved to
the new location.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Press T.
2. Dial Access Code 
HD.
1. Press...

July 2003 NEC Business Solutions Ltd
552 – S18Station Relocation
Doc. No. 8201 - Release 1.0
July 2003
Restrictions
	This feature can
 be used to relocate terminals among the following
combinations: 
	This feature cannot
 be used with the following combinations: 
	An error tone is received and Error is displayed in the LCD under the
following conditions:
zEntering a station number that causes a prohibited combination
(refer to the previous bullet for combinations).
zEntering a station number that does...