NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual T2 – 573
Doc. No. 8201 - Release 1.0
July 2003
Tenant ServiceT- 2
FEATURE 
DESCRIPTION
Tenant Service subdivides the system into a maximum of 48 Tenants that
have outside line access.
SYSTEM 
AVAILABILITYTerminal Type
Not applicable.
Required Components
None.
OPERATING 
PROCEDURES
SERVICE 
CONDITIONS
General
	Multiple tenants can share outgoing lines.
	Outgoing calls and Add-On Conferences may be accessed between
tenants.
	Internal calls may be made to different...

July 2003 NEC Business Solutions Ltd
574 – T2Tenant Service
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING 
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BNTrunk to Tenant Assignment 2-01
¶+BTTTelephone to Tenant Assignment 4-09
¶+BNLine Key Selection 2-05
¶+BNLine Key Selection for Tenant Mode 2-06
¶+BNSystem Speed Dial Display Assignment 2-07
¶+BNECR Relay to Tenant Assignment 2-08
¶+AUAutomated Attendant...

Features and Specifications Manual T3 – 575
Doc. No. 8201 - Release 1.0
July 2003
Three-Minute ReminderT- 3
FEATURE 
DESCRIPTIONThis feature provides a reminder tone that is heard every three minutes by
the Multiline Terminal user who originated or answered an outside call.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
SERVICE 
CONDITIONS
General
	The Three-Minute Reminder produces a tone every three minutes
from the built-in speaker on the...

July 2003 NEC Business Solutions Ltd
576 – T3Three-Minute Reminder
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual T4 – 577
Doc. No. 8201 - Release 1.0
July 2003
Tone OverrideT- 4
FEATURE 
DESCRIPTIONMultiline Terminal users calling a busy station and receiving a call waiting
tone can generate a Tone Override that is heard by the originator and busy
station. Multiline Terminal users may answer the Override by placing the
existing call on hold.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Dial Access Code J to send the Tone...

July 2003 NEC Business Solutions Ltd
578 – T4Tone Override
Doc. No. 8201 - Release 1.0
July 2003
Restrictions
	Tone Override can be accomplished only after receiving a call waiting
tone.
	An attempt to Tone Override a Multiline Terminal may be denied for the
following reasons:
zThe Multiline Terminal is set in the Do Not Disturb (DND) mode.
zAuto Redial is activated.
zDuring Station Programming.
zThe Multiline Terminal is denied the ability to receive a Tone
Override.
zAnother station is already sending...

Features and Specifications Manual T5 – 579
Doc. No. 8201 - Release 1.0
July 2003
Trunk QueuingT- 5
FEATURE 
DESCRIPTIONThe Trunk Queuing feature allows a station user to increase call processing
efficiency. When all outside lines or a selected line are busy, telephone
users can queue onto the busy line. When a line becomes available, the
system provides an internal incoming ring to the queuing station. If the line
is no longer needed, before the line becomes available, the queue request
is cancelled by...

July 2003 NEC Business Solutions Ltd
580 – T5Trunk Queuing
Doc. No. 8201 - Release 1.0
July 2003
1. Dial the Access Code for outside line.
2. Receive busy tone.
3. Dial the Trunk Queuing Access Code (default: 
GH).
4. Restore the handset.
1. Receive internal ringing tone.
2. Lift the handset or press
P.
3. Receive the outside dial tone.
4. Dial the desired number.
1. Lift the handset or press
P.
2. Receive internal dial tone.
3. Dial the Trunk Queuing Cancel Access Code (default: 
GI).
4. Restore the...

Xen IPK Features and Specifications Manual
Features and Specifications Manual T5 – 581
Doc. No. 8201 - Release 1.0
July 2003
	If the queued outside line is not seized within the time specified in
System Programming, the queuing is released (default: 10 seconds.)
	If a station that has set Trunk Queuing sets another queue, the original
Trunk Queue is cancelled.
	If a station with a CO/PBX queue set is busy on a different call when
the queued line becomes available, the outside line can be seized by...

July 2003 NEC Business Solutions Ltd
582 – T5Trunk Queuing
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK