NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual U4 – 603
Doc. No. 8201 - Release 1.0
July 2003
Unsupervised ConferenceU-4
FEATURE 
DESCRIPTIONThe Unsupervised Conference feature allows a Multiline Terminal user to
exit an established conference call and leave the remaining parties to
continue talking. This same user can then reenter the conference anytime.
SYSTEM 
AVAILABILITYTerminal Type
All multiline terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Establish a conference call from a Multiline...

July 2003 NEC Business Solutions Ltd
604 – U4Unsupervised Conference
Doc. No. 8201 - Release 1.0
July 2003
General
	A maximum of six conference calls (Add-On and Unsupervised) may
be in progress at the same time.
	Other stations cannot enter an Unsupervised Conference.
	Other stations cannot be interrupted (Barge-In) while on an
Unsupervised Conference call.
	If the Tandem Transfer Automatic Disconnect Timer runs out of time,
the system automatically disconnects any outside calls.
	An alert tone is heard...

Features and Specifications Manual U5 – 605
Doc. No. 8201 - Release 1.0
July 2003
User Programming AbilityU-5
FEATURE 
DESCRIPTIONStation users can perform programming functions at their station. Two
features programmable from a station are Station Speed Dial and Ringing
Line Preference. With NEC Client Administration Terminal (CAT) End-User
Software, many additional features can be programmed by the user.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURES...

July 2003 NEC Business Solutions Ltd
606 – U5User Programming Ability
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual V1 – 607
Doc. No. 8201 - Release 1.0
July 2003
Voice Mail Integration 
(Analogue)V- 1
FEATURE 
DESCRIPTIONThe Voice Mail Integration feature provides the necessary interface
between the Xen IPK system and a locally-provided Voice Mail system.
When a station is forwarded to the Voice Mail system and a station user
calls that forwarded station, the call goes directly to the individual personal
mail box. If the Voice Mail system has the ability, a message can be sent to...

July 2003 NEC Business Solutions Ltd
608 – V1Voice Mail Integration (Analogue)
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSData Assignment
	Each SLI(  )-U(  ) ETU port can be assigned in System Programming to
support Voice Mail. A maximum of two SLI(8)-U(  ) ETUs or four
SLI(4)-U(  ) ETUs can be installed to support 16 Voice Mail ports.
	SLI(  )-U(  ) ETU ports assigned as voice mail cannot establish an Add-
On Conference Call.
	The Message Waiting Access Code for Voice Mail set/cancel can...

Xen IPK Features and Specifications Manual
Features and Specifications Manual V1 – 609
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BTI4Voice Mail/SLT Selection4-35
¶+BTTIntercom Master Hunt Number Selection 4-14
¶+BTTIntercom Master Hunt Number Forward 
Assignment4-15
¶+AVVoice Mail Quick Transfer Master Hunt Number 1-8-26
¶+BAIntercom Feature Access Code...

July 2003 NEC Business Solutions Ltd
610 – V1Voice Mail Integration (Analogue)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual V2 – 611
Doc. No. 8201 - Release 1.0
July 2003
Voice Mail Message KeyV- 2
FEATURE 
DESCRIPTIONThe Voice Mail Message Key provides a visual indication as to the
existence of new voice mail messages sent to a mailbox. This feature can
be assigned on a Line Key (Feature Access key) or One Touch key and can
be placed on any terminal or DSS Console, not necessarily the terminal for
which the mailbox is assigned. Pressing the Voice Mail Message Key will
access the voice mail...

July 2003 NEC Business Solutions Ltd
612 – V2Voice Mail Message Key
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSData Assignment
	Use Memory Block 1-8-08 [Class of Service (Station)
Feature Selection 2] Page 6 LK2 to allow (LED On) Voice Mail
Message Notification.
	Use Memory Block 1-8-26 (Voice Mail Quick Transfer Master Hunt
Number) to assign the Voice Mail Pilot Number.
	Use Memory Block 2-05 (Line Key Selection) to select Tenant-Wide or
Telephone Mode line key assignment to each tenant....