Home > NEC > Communications System > NEC Xen Ipk Features And Specifications Manual

NEC Xen Ipk Features And Specifications Manual

Here you can view all the pages of manual NEC Xen Ipk Features And Specifications Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 601

Features and Specifications Manual U2 – 593
Doc. No. 8201 - Release 1.0
July 2003
Uniform Numbering 
NetworkU-2
FEATURE 
DESCRIPTIONThis feature allows multiple or compatible systems to be connected in a
network via Tie lines. Station users can access any station by dialling a
system number and a station number (open numbering) or by dialling the
station number only (closed numbering). If the calling and called systems
are not directly connected by a single Tie line, several Tie lines may be
accessed to...

Page 602

July 2003 NEC Business Solutions Ltd
594 – U2Uniform Numbering Network
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSData Assignment
When a system other than the Xen IPK is being networked with a Xen IPK
system and the numbering plans cannot be changed on the existing system,
Tie lines in the Xen IPK system can be programmed to delete and add digits
to meet the existing numbering scheme.
Restrictions
	DID Full Digit Conversion cannot access the Uniform Numbering
Network.
General
	Attention...

Page 603

Xen IPK Features and Specifications Manual
Features and Specifications Manual U2 – 595
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BA4Access Code (1-, 2-, or 3-Digit) Assignment1-1-46/47/
48401 ~ 416
¶+BSStation Number Assignment 4-10
¶+BCTTrunk (Installed, DP/DTMF) Selection 3-92
¶+BCTTrunk-to-Trunk Group Assignment 3-03
¶+BCSRoute Advance Block Assignment...

Page 604

July 2003 NEC Business Solutions Ltd
596 – U2Uniform Numbering Network
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Page 605

Features and Specifications Manual U3 – 597
Doc. No. 8201 - Release 1.0
July 2003
Universal SlotsU-3
FEATURE 
DESCRIPTIONThe Xen IPK system, B64-U( ) KSU, has eight universal slots and up to
three cabinets can be installed. The system uses the same KSU for the
basic and expansion cabinets to support up to 24 Universal Slots.
SYSTEM 
AVAILABILITYTerminal Type
Not applicable.
Required Components
None.
OPERATING 
PROCEDURES
SERVICE 
CONDITIONS
General
	Two software packages (Basic Port Package and Expanded...

Page 606

July 2003 NEC Business Solutions Ltd
598 – U3Universal Slots
Doc. No. 8201 - Release 1.0
July 2003
	An ESIB(8)-U( ) ETU with an ESIE(8)-U( ) ETU installed supports 16
Electronic Station Interface ports. This combination can be installed in
any Interface Slot (1~8) of any Cabinet (1~3) without requiring
adjacent slots to be vacant.
	PRT(1)-U( ) ETUs can be installed in any Interface Slot (1~8) of any
Cabinet (1~3), only requiring one adjacent slot to be vacant when the
number of channels is more than 24....

Page 607

Xen IPK Features and Specifications Manual
Features and Specifications Manual U3 – 599
Doc. No. 8201 - Release 1.0
July 2003
	The available interface cards and maximum capacities for
Universal Slots with the Xen IPK system are shown in the following
tables. 
 
Station Interface UnitsDescription
Maximum Capacities
NotesBasic Port 
PackageExpanded 
Port Package
ACD(8)-U( ) ETU 8-port ACD System 1 1 Note 1, 4, 6
CNF(8)-U( ) ETU 8-port Conference Unit 2 2 Note 1, 7, 8
ESI(8)-U( ) ETU 8-port Electronic...

Page 608

July 2003 NEC Business Solutions Ltd
600 – U3Universal Slots
Doc. No. 8201 - Release 1.0
July 2003
 
Trunk Interface UnitsDescription
Maximum Capacities
NotesBasic Port 
PackageExpanded 
Port Package
BRT (4)-U( ) ETU 4-port ISDN Interface for 8 trunks 2 8 Note 1
COI(4)-U( ) ETU 4-port CO/PBX Line Interface 4 16 Note 1
COI(8)-U( ) ETU 8-port CO/PBX Line Interface 2 8 Note 1
DID (4)-U( ) ETU 4-port Direct Inward Dialling Interface 4 18 Note 1
IPT(4)-U( ) ETU4-port Voice over Internet Protocol 
Trunk...

Page 609

Xen IPK Features and Specifications Manual
Features and Specifications Manual U3 – 601
Doc. No. 8201 - Release 1.0
July 2003
	Refer to the Xen IPK System Hardware Manual for more information.
Restrictions
	KSU Power-Based ETU Quantity Limitations
The following charts indicate the maximum number of specific ETU
combinations in each KSU that are restricted by power limitations of
the KSU. 
Application Interface 
UnitsDescription
Maximum Capacities
NotesBasic Port 
PackageExpanded 
Port Package
BSU(2)-U( )...

Page 610

July 2003 NEC Business Solutions Ltd
602 – U3Universal Slots
Doc. No. 8201 - Release 1.0
July 2003
RELATED 
FEATURE LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
C-3 Call Arrival Keys (CAR)
D-7 Digital Voice Mail
D-8 Direct Inward Dialling (DID)
D-16 Door/Monitor Telephone
E-3 E&M Tie Lines (4-Wire)
A-21 Automatic Call Distribution (ACD Plus)
E-6 External Zone Paging (Meet-Me)
G-1 General Purpose Relays
I-7 ISDN-BRI Trunk Connections
I-8 ISDN-PRI Trunk Connections
L-5 Loop Start Trunks...
Start reading NEC Xen Ipk Features And Specifications Manual

Related Manuals for NEC Xen Ipk Features And Specifications Manual

All NEC manuals