NEC Xen Ipk Features And Specifications Manual

Xen IPK Features and Specifications Manual
Features and Specifications Manual V2 – 613
Doc. No. 8201 - Release 1.0
July 2003
General
	The state of a One Touch or Feature Access key is indicated by the
red LED as follows:
zOn Steady - Registered Box Number Station is busy.
zFlashing 0.25 ON / 0.25 OFF - Registered station is in Call Forward
All Calls or Do Not Disturb mode.
zFlashing 0.5 ON / 0.5 OFF - Registered station was set by pressing
the Function key.
zFast Flash 0.125 ON / 0.125 OFF - Mailbox...

July 2003 NEC Business Solutions Ltd
614 – V2Voice Mail Message Key
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BSTelephone Type Assignment 7-2
¶+BTMMultiline Terminal Type Selection 4-50
¶+BTSClass of Service (Station) Feature Selection 2 1-8-08 6-2
¶+BTTStation to Class of Service Feature Assignment 4-17
¶+BNLine Key Selection 2-05
¶+BNLine Key Selection for...

Features and Specifications Manual V3 – 615
Doc. No. 8201 - Release 1.0
July 2003
Voice Over Internet 
Protocol (VoIP)V- 3
FEATURE 
DESCRIPTIONVoice Over IP sends the real time voice/fax over the corporate LAN or
WAN. The voice from the telephone is digitised and then put into packets to
be sent over a network using Internet protocol.
Savings in the telephony charges for calls between two KTSs and using the
LAN/WAN infrastructure to its full capacity are advantages in having VoIP
for the Xen IPK system....

July 2003 NEC Business Solutions Ltd
616 – V3 Voice Over Internet Protocol (VoIP)
Doc. No. 8201 - Release 1.0
July 2003
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
IPT(4)/(8)-U(  ) ETU
OPERATING 
PROCEDURES
SERVICE 
CONDITIONS
Data Assignment
	Memory Block 1-1-59, (Synchronous Ringing Selection), must be set
to NO when the IPT(4)/(8)-U(  ) ETU is used as a COI/COID ETU.
General
	The IPT(4)/(8)-U(  ) ETU can communicate only with another IPT(4)/
(8)-U(  ) ETU that may reside on a...

Xen IPK Features and Specifications Manual
Features and Specifications Manual V3 – 617
Doc. No. 8201 - Release 1.0
July 2003
COI/COID Mode
	Sixty-four trunks (Loop Start, E&M Tie Lines, and DID Trunks) can
be installed in a Xen IPK Expanded system, or 16 trunks in a Xen IPK
Basic system.
RELATED 
FEATURES
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
C-21 CO/PBX, Tie Line Digit Restriction
D-8 Direct Inward Dialling (DID)
E-3 E&M Tie Lines (4-Wire)
L-5 Loop Start TrunksLoop Start Trunks
U-2...

July 2003 NEC Business Solutions Ltd
618 – V3 Voice Over Internet Protocol (VoIP)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual V4 – 619
Doc. No. 8201 - Release 1.0
July 2003
Voice Over SplitV- 4
FEATURE 
DESCRIPTIONBy dialling an Access Code, a station user can voice override the
conversation between another station user and another party. When the
conversation is interrupted, only the station that received the Voice Over
hears it.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Receive call waiting tone.
2. Dial Access Code 
F (default) to...

July 2003 NEC Business Solutions Ltd
620 – V4Voice Over Split
Doc. No. 8201 - Release 1.0
July 2003
1. Receive Voice Over.
2. Press
U to answer the calling party. The other party is
automatically placed on hold (
O flashes green.)
3. Press
O to switch over to talk to the other party.
4. Talk to the called party.
Repeatedly pressing O alternates the talk path between both
calls.
1. Receive Voice Over.
2. Press
T+ FE (or a Feature Access key/One-Touch key
programmed with the Access Code) to switch over to...

Xen IPK Features and Specifications Manual
Features and Specifications Manual V4 – 621
Doc. No. 8201 - Release 1.0
July 2003
	An attempt to Voice Over a Multiline/Single Line Terminal can be
denied for the following reasons:
zMultiline Terminal is in DND (Do Not Disturb) Mode
zAutomatic Redial is activated
zDuring Station Programming
zDuring Incoming Ringing
zDuring Internal Paging
zDuring External Paging
zDuring a Conference Call
zDuring a Conference Call on Hold
zTerminal is on Internal Hold
zTerminal...

July 2003 NEC Business Solutions Ltd
622 – V4Voice Over Split
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BTSClass of Service (Station) Feature Selection 2 1-8-08 1-8, 3-3
¶+BTTStation to Class of Service Feature Assignment 4-17
¶+BAIntercom Feature Access Code Assignment 1-2-24 006