NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 67
Busy Status - Hotel Attendant B-26
General Description (cont’d)
9. When the called station is engaged in a CO line call and when Central Office code is not assigned:
10. When the called station is engaged in a call with a Hotel Attendant, and specified Attendant Number (1 to
6 digits) is assigned:
11. When the called station is engaged in call with a Hotel Attendant, and Specified Attendant Number is not
assigned:
12. For other...

NEAX2400 IPX Hotel Feature Programming ManualPage 68NDA-24304, Issue 1
B-26 Busy Status - Hotel Attendant
Assignment Procedure
STEP CMND BIT EXPLANATION
1AHSY
INDEX
109b
0Not used
b
1
Charging Method of ATT (If No. 7 CCIS service is provided, “1” is must be assigned)
0 = “9” + “Trunk Number”
1 = Specific Attendant Number
b
2When Administration or Guest stations dial the unused number or the dead level number
0/1 = -/The call is transferred to the Console automatically
b
3Not used
b
4
b5Busy Status...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 69
Calendar Display C-19
C-19Calendar Display
General Description
A digital display indicating month, day, hour, and minute is provided on the Console.
Operating Procedure
Hour and minute information is constantly displayed. Month and day information is displayed only while key
operations pertaining to hospitality services are not being performed.
Service Conditions
1. Hour and minute display - (constant).
Note:The Attendant Console...

NEAX2400 IPX Hotel Feature Programming ManualPage 70NDA-24304, Issue 1
C-23 Check-In/Checkout
C-23Check-In/Checkout
General Description
This service manages Vacant/Occupied status of each Guest room, and automatically restrict/cancel the restriction
for such services as C.O. outgoing call, Automatic Wake-Up, etc. according to the present status of each Guest room.
When CHECK-IN/CHECKOUT service is activated from the PMS terminal, the Console, or the Front Desk
Terminal, the following operations occur:
...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 71
Check-In/Checkout C-23
Assignment Procedure
STEP CMND BIT EXPLANATION
1AHSY
INDEX
403b
0
Processing when Checkout Result (Feature Code = 16, Function Code = 2) has been
received from PMS.
0: Out status memory in Guest memory is cleared
1: All Guest memory is cleared
b
1
Not used b
2
b3
b4
b5
b6
b7 

NEAX2400 IPX Hotel Feature Programming ManualPage 72NDA-24304, Issue 1
C-32 Calling Station Number Display
C-32Calling Station Number Display
General Description
This feature provides hospitality service stations (restaurant, valet, room service, etc.) and Guest stations with an
LCD display of incoming calling number (Guest, Administration, OG, or IC trunk). This display flashes while the
call is ringing, then appears steadily when the call is answered. D
termmay be used for service stations.
Operating...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 73
Calling Station Number Display C-32
Operating Procedure (cont’d)
b.) Lift handset and answer the call. The display stops flashing.
Service Conditions
1. When a call terminates to a line other than the prime line, the LCD displays the incoming station as
determined by LINE PRESELECTION - Dterm[L-9D].
2. LINE PRESELECTION - D
term[L-9D] is governed by a timer. After the timer times out, the display
returns to TIME DISPLAY -...

NEAX2400 IPX Hotel Feature Programming ManualPage 74NDA-24304, Issue 1
C-71 Called Number Display - Hotel Attendant Console
C-71Called Number Display - Hotel Attendant
Console
General Description
If a call is transferred to the Console as a result of the following features:
DO NOT DISTURB [D-11]
CALL FORWARDING - ALL CALLS [C-5]
CALL FORWARDING - BUSY LINE [C-2]
CALL FORWARDING - DONT ANSWER [C-3]
CALL FORWARDING - INTERCEPT/ANNOUNCEMENT [C-25]
Information pertaining to that station is displayed on the...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 75
Called Number Display - Hotel Attendant Console C-71
Service Conditions (cont’d)
2. If the Attendant presses theSRCkey while the called station number is displayed, the display changes to
the number of the calling party. The called station number cannot be displayed again.
3. While the called station number is displayed, the Attendant can transfer the call to a desired station by
keying the destination number on the keypad. In this...

NEAX2400 IPX Hotel Feature Programming ManualPage 76NDA-24304, Issue 1
C-71 Called Number Display - Hotel Attendant Console
2SYS1
ASYD
INDEX
78b
0Calling and Intermediate Station Number indication (Dtermand Console)
0/1 = Out/In Service (Always assign “1”.)
b
1Kind of Service Class indication (Dterm)
0/1 = Out/In Service (Always assign “1”.)
b
2Not used
b
3
b4Fixed “0”
b
5Name Display Service
0/1 = Out/In Service
b
6Not used
b
7
3AHSY
INDEX
110b
0
Room key Interface
0: Interface is absent (STAY/OUT is...