NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 37
Automatic Wake-Up DtermA-10D
15AHSY
INDEX
402b
0Not used
b1Wake-Up Result (Answer) Printout
0/1 = Out/In Service
b
2
Not used b
3
b4
b5
b6
b7
STEP CMND EXPLANATION
16AANP
or
AGNPAssign the Number of Necessary Digits for the first numeral of the Automatic Wake-Up Service
Access Code.
17AASP
or
AGSPAssign the Automatic Wake-Up Service Access Code.
When setting and cancelling are made by each individual Access Code.
 For Setting: CI =...

NEAX2400 IPX Hotel Feature Programming ManualPage 38NDA-24304, Issue 1
A-15 Announcement Service
A-15Announcement Service
General Description
This service feature allows a station user to hear a prerecorded announcement for various services such as:
ALERT SERVICE [A-57]
AUTOMATIC WAKE-UP [A-10]
Confirmation announcement (See AUTOMATIC WAKE-UP) [A-10]
DO NOT DISTURB [D-11] mode setting
GROUP SERVICE THROUGH PMS [G-4]
Hotel information
Intercept announcement when a vacant level is dialed
Language selection...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 39
Announcement Service A-15
Assignment Procedure
STEP CMND PROCEDURE
1AANP
or
AGNPAssign minimum necessary number of digits for the first number of the Announcement Service
Access Code
2AASP
or
AGSPAssign the access code to the announcement unit number.
3ARTDAssign the route data of the trunk which interfaces with the announcement unit.
(LSG=5,TCL=4)
4 ARTD Assign the trunk interfacing with the announcement unit.
5 MBTK Release the...

NEAX2400 IPX Hotel Feature Programming ManualPage 40NDA-24304, Issue 1
A-25 Attendant Console With Hotel Functions
A-25Attendant Console With Hotel Functions
General Description
The NEAX2400 IPX Console provides regular business call handling and processing capabilities, as well as
hospitality features. The console provides for the following special hospitality services:
1. Individual keys to set and reset:
AUTOMATIC WAKE-UP [A-10]
MESSAGE WAITING [M-6]
CHECK-IN/CHECKOUT [C-23]
DO NOT DISTURB [D-11]...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 41
Attendant Console With Hotel Functions A-25
General Description (cont’d)
Note:If the Desk Console is used instead of the NEAX2400 IPX Hotel Attendant Console, the basic key allocations
are different from the previous ones. The following illustration shows the Desk Console key positions and
indications used in Hotel Systems. The operating procedures for each service are the same as the
NEAX2400 IPX Hotel Attendant Console.
Figure 1...

NEAX2400 IPX Hotel Feature Programming ManualPage 42NDA-24304, Issue 1
A-25 Attendant Console With Hotel Functions
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX 9
Number of Consoles
Maximum 4 consoles per PIM.
2SYS1
ASYD
INDEX 43b
0
For Remote Access to System, is Forced Account (F/A) Code Dialing required upon
receiving ringback tone?
0/1 = Required/Not Required
b
1Not used
b
2
Send service set tone after ACC Code dialing for Authorization Code or F/A code is dialed
using LCR Access...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 43
Attendant Console With Hotel Functions A-25
4SYS1
ASYD
INDEX 68b
0Operating method for busy station service (Call Back, Executive Right-of-Way, etc.)
0/1 = SHF + Access Code/Last Digit + Access Code
b
1
Operating method for Individual Trunk Access (Console) service
0 = Route No. + Trunk No.
1 = C.O. Code (as assigned via command “ACOC”)
b
2Ringing Signal type for TAS indicator
0/1 = Interval/Continuous
b
3OG Trunk Queuing (On-Hook)...

NEAX2400 IPX Hotel Feature Programming ManualPage 44NDA-24304, Issue 1
A-25 Attendant Console With Hotel Functions
7SYS1
ASYD
INDEX
161b
0Don’t Disturb Override key on Console
0/1 = Out/In Service
b
1Message Waiting Service
0/1 = Out/In Service
b2Language Service
0/1 = Out/In Service
b
3Screening Service
0/1 = Out/In Service
b
4Not used
b
5DSS (Direct Station Section) Key on Console
0/1 = Ineffective/Effective
b
6Timing Start using “#” CodeNote 2
0/1 = Ineffective/Effective
b
7Timing Start using “*”...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 45
Attendant Console With Hotel Functions A-25
9SYS2
ASYD
INDEX
0b
0
Restriction Data of Station Busy Services can be designated as the table below:
R: Restricted A: Allowed
b1
b2Not used
b
3Attendant Override service
0/1 = Out/In Service
b4Busy Verification (Console) service
0/1 = Out/In Service
b5
Not used b6
b7
10SYS2
ASYD
INDEX
2b
0Sender Signal to DP/PB Route (Station)
0/1 = DP/PB
b
1Sender Signal to DP/PB Route (Console)
0/1 =...

NEAX2400 IPX Hotel Feature Programming ManualPage 46NDA-24304, Issue 1
A-25 Attendant Console With Hotel Functions
11SYS2
ASYD
INDEX
6b
0Message Center Interface service when terminating to a UCD Group
0/1 = Out/In Service
b
1
Not used b2
b3
b4Call Origination Restriction of Station upon Setting Call Forwarding-All Calls
0/1 = Required/Not Required
b
5Inter-Position Transfer service
0/1 = Out/In Service
b6Not used
b
7Call Forwarding - Don’t Answer service (at Console)
0/1 = Out Service (Recall to...