NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 17
Automatic Wake-Up A-10
Service Conditions
1. From the Front Desk Terminal or Console, set AUTOMATIC WAKE-UP using either 24-hour time, or
12-hour time. When using 12-hour time, time is entered by dialing a special code, which includes either a
# or * before entering the time to indicate PM. For example, when dialing the desired time, dial #1030 for
10:30 PM. The choice of # or * is assigned in system data.
2. The maximum number of...

NEAX2400 IPX Hotel Feature Programming ManualPage 18NDA-24304, Issue 1
A-10 Automatic Wake-Up
Service Conditions (cont’d)
Note:Any Administration Station that is assigned as a Special Administration Terminal may NOT set WAKE-UP
for itself or for any station other than a Guest station.
11. If PMS Language Selection is used, AUTOMATIC WAKE-UP announcements can be provided
according to a Guests language.
12. If all announcement trunks are busy, music will be provided for AUTOMATIC WAKE-UP. Music is
provided...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 19
Automatic Wake-Up A-10
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX
161b
0Don’t Disturb Override key on Console
0/1 = Out/In Service
b
1Message Waiting Service
0/1 = Out/In Service
b
2Language Service
0/1 = Out/In Service
b
3Screening
0/1 = Out/In Service
b
4Not used
b
5DSS (Direct Station Section) Key on Console
0/1 = Ineffective/Effective
b
6Timing Start using “#” Code
0/1 = Ineffective/Effective
b
7Timing Start...

NEAX2400 IPX Hotel Feature Programming ManualPage 20NDA-24304, Issue 1
A-10 Automatic Wake-Up
3SYS1
ASYD
INDEX
163b
0Over Time Call timer.
b
1
b2Over Time Call
0/1 = Out/In Service
b
3Over Time Call indication
0/1 = On Console/Hotel Printer
b
4Step Call from Guest Station is allowed
0/1 = Out/In Service
b
5Tone type for Maid Dialing
Note:
Guest Station is available. Administration Station receives only service set
tone.
b6
b7Start time of Automatic Wake-Up Call
0/1: On time/5 min. before
4SYS1
ASYD...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 21
Automatic Wake-Up A-10
5SYS1
ASYD
INDEX
165b
0Port Number of connecting the Hotel Printer Command Service
b
1
b2
b3Hotel Printer Command Service
0/1 = Not Required/Required
b
4Automatic Wake-Up - Hotel Attendant Assistant
0/1 = Out/In Service
b
5Wake-Up Guest Station Priority Service
0/1 = Not Provided/Provided
b
6Wake-Up information (time, station number, etc.) printout
0/1 = Out/In Service
b
7Floor Service
0/1 = Out/In Service...

NEAX2400 IPX Hotel Feature Programming ManualPage 22NDA-24304, Issue 1
A-10 Automatic Wake-Up
8AHSY
INDEX
100
Noteb
0Number of times of Wake-Up Answer Retry.
b
1
b2Number of characters of language information display
0/1 = 4 characters/2 characters
b
3Restriction for hooking when a Guest station has originated an outgoing C.O. line call.
0/1 = Not Required/Required
b
4Type of STA for Overtime Call

00:- 10: Administration STA only
01: Guest STA only 11: Both (Administration and Guest STA)

00:- 10:...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 23
Automatic Wake-Up A-10
10AHSY
INDEX
142b
0
Not used b1
b2
b3
b4Wake-Up call “Busy” condition; transfer to Console
0/1 = Out/In Service
b
5Wake-Up call “Don’t Answer” condition; transfer to Console
0/1 = Out/In Service
b
6Wake-Up call “Block” condition; transfer to Console
0/1 = Out/In Service
b
7Wake-Up call for VIP Busy/Block condition; transfer to Console
0/1 = Out/In Service
11AHSY
INDEX
163b
02nd Wake-Up Call Service
0/1 = Out/In...

NEAX2400 IPX Hotel Feature Programming ManualPage 24NDA-24304, Issue 1
A-10 Automatic Wake-Up
14AHSY
INDEX
402b
0Not used
b
1Wake-Up Result (Answer) Printout
0/1 = Out/In Service
b
2
Not used b
3
b4
b5
b6
b7
15AHSY
INDEX
406Specific end time, when the NEAX2400 IPX will stop scanning rooms for pending wake-up
information.
Hour data is assigned using a decimal number (military time).
Example:8:00 a.m. - Data entered is 08
Example:8:30 p.m. - Data entered is 20
16AHSY
INDEX
407Specific end time, when the...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 25
Automatic Wake-Up A-10
20 MBTK Release the Make Busy of the trunk assigned in ATRK.
23 ARSCRelease the Call restrictions between the RSC of the station accessing the announcement unit and the
route of the trunk assigned in ATRK.
(RRI = 2.3)
24 AAEDAssign the Data to the announcement unit number and the route data, etc. assigned in ATRK. Assign
the information with respect to the following:
EQP = 16: Automatic Wake-Up Set
EQP = 18:...

NEAX2400 IPX Hotel Feature Programming ManualPage 26NDA-24304, Issue 1
A-10D Automatic Wake-Up Dterm
A-10DAutomatic Wake-Up Dterm
General Description
This service feature allows the NEAX2400 IPX to be programmed to automatically call Guest rooms at specified
times. Upon answering, the Guest is connected to a recorded announcement or music source. A printout of
unanswered, blocked, or busy wake-up attempts for Guest rooms is provided at the Hotel printer. This feature can
be activated from the Guest room...