NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 27
Automatic Wake-Up DtermA-10D
Operating Procedure (cont’d)
To cancel AUTOMATIC WAKE-UP from a Guest Room Dterm(24-hour time only)
1. With separate set and cancel codes:
a.) Lift the handset or press theSPEAKERkey. Receive dial tone.
b.) Dial CANCEL AUTOMATIC WAKE-UP code. Hear service set tone. The LCD displays:
c.) Hang up.
2. When set and cancel codes are the same:
a.) Lift the handset or press theSPEAKERkey. Receive dial tone.
b.)...

NEAX2400 IPX Hotel Feature Programming ManualPage 28NDA-24304, Issue 1
A-10D Automatic Wake-Up Dterm
Service Conditions (cont’d)
Note:Wake-Up Time set from a station will be rounded to the nearest multiple of five.
6. If Wake-Up announcement is used, this feature requires one of the following hardware alternatives:
a.) Central Office Trunk (COT) or 2W E&M trunk and an announcement machine.
b.) Digital Announcement Trunk (DAT).
7. This feature provides three additional AUTOMATIC WAKE-UP attempts at fixed...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 29
Automatic Wake-Up DtermA-10D
Service Conditions (cont’d)
18. It is possible to use the same access code for both AUTOMATIC WAKE-UP set and cancel. For example,
*1 may be assigned the AUTOMATIC WAKE-UP set and cancel access code. The NEAX2400 IPX will
recognize *1 and wait for the next digit. If 0, 1, or 2 is dialed, then a time is being set. If the 3 is dialed,
this is an AUTOMATIC WAKE-UP cancel. For example:
*1 0800 8:00 AM wake-up...

NEAX2400 IPX Hotel Feature Programming ManualPage 30NDA-24304, Issue 1
A-10D Automatic Wake-Up Dterm
Service Conditions (cont’d)
c.) When setting DO NOT DISTURB - Dterm, AUTOMATIC WAKE-UP - Dtermand MESSAGE
WAITING:
d.) When setting DO NOT DISTURB - D
term, AUTOMATIC WAKE-UP - Dterm, MESSAGE
WAITING and 2ND WAKEUP CALL - SAME GUEST STATION (MW lamp illuminates):
In case of the MESSAGE WAITING lower display (MW lamp illuminates):
Note:On the upper LCD, AUTOMATIC WAKE-UP - Dterm, 2ND WAKE-UP CALL - SAME...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 31
Automatic Wake-Up DtermA-10D
Service Conditions (cont’d)
g.) When cancelling 2ND WAKEUP CALL - SAME GUEST STATION at the status “e” (the MW
lamp illuminates):
25. Maximum number of stations per LP that can be set for a single AUTOMATIC WAKE-UP time is
determined by the system data.
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX
161b
0Don’t Disturb Override key on Console
0/1 = Out/In Service
b
1Message Waiting...

NEAX2400 IPX Hotel Feature Programming ManualPage 32NDA-24304, Issue 1
A-10D Automatic Wake-Up Dterm
2SYS1
ASYD
INDEX
162b
0Destination of connection when a connection between Guest stations is restricted.
b
1
b2Destination of connection when Room Cutoff is assigned.
b
3
b4Destination of connection when Do Not Disturb is assigned.
b
5
b6Assignment of Answering Tone to Automatic Wake-Up Call
Tone to be given when a wake-up call is answered
b
7
3SYS1
ASYD
INDEX
163b
0Overtime Call timer.
b
1
b2Overtime...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 33
Automatic Wake-Up DtermA-10D
4SYS1
ASYD
INDEX
164b
0Number of Digits of all Hotel ID Code
b
1
b2
b3
ID Code for setting/cancelling Maid Status
0/1 = Not Required/Required
Note:
If the data of Bit 3 or Bit 7 is 1, Bits 0, 1, 2 of INDEX 164 must be enabled
for the number of digits.
b4Number of Digits of Group Code (PMS option)
b
5
b6
b7
ID Code to be entered when setting or cancelling Automatic Wake-Up Call from a
Special...

NEAX2400 IPX Hotel Feature Programming ManualPage 34NDA-24304, Issue 1
A-10D Automatic Wake-Up Dterm
6SYS1
ASYD
INDEX
169b
0Miscellaneous Timer Counter (MTC) is to be assigned 0 a value from 0 Hex, (0-15)
Announcement trunk release timer to reset the announcement. Available only with single
connection. 2 sec. MTC (If MTC = 0 Hex: 30 sec.) b
1
b2
b3
b4
Assign data specifying how many minutes earlier the wake-up time for the
overflowed stations (more than 500/LP). 5 min x N Hex. b5
b6
b7
7SYS1
ASYD
INDEX...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 35
Automatic Wake-Up DtermA-10D
9AHSY
INDEX
100
Noteb
0Number of times of Wake-Up Answer Retry
b
1
b2Number of characters of language information display
0/1 = 4 characters/2 characters
b
3Restriction for hooking when a Guest station has originated an outgoing C.O. line call.
0/1 = Not Required/Required
b
4
Type of STA for Overtime Call

00:- 10: Administration STA only
01: Guest STA only 11: Both (Administration and Guest STA)

00:...

NEAX2400 IPX Hotel Feature Programming ManualPage 36NDA-24304, Issue 1
A-10D Automatic Wake-Up Dterm
11AHSY
INDEX
142b
0
Not used b1
b2
b3
b4Wake-Up call “Busy” condition; transfer to Console.
0/1 = Out/In Service
b
5Wake-Up call “Don’t Answer” condition; transfer to Console.
0/1 = Out/In Service
b
6Wake-Up call “Block” condition; transfer to Console.
0/1 = Out/In Service
b
7Wake-Up call for VIP Busy/Block condition; transfer to Console.
0/1 = Out/In Service
12AHSY
INDEX
163b
02nd Wake-Up Call Service...