NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 47
Attendant Console With Hotel Functions A-25
15AHSY
INDEX
105b
0Not used
b1
b2Maid Dial service from Console
0/1 = Not Required/Required
b
3Not used
b
4Wake-Up Time Indication on Hotel Console
0/1 = 24-hour/l2-hour system
b
5Not used
b6
b7Guest Name Display on Console
0/1 = Interface Type Model 60, 90, 120/Model 90, 120
16AHSY
INDEXES
101 & 102When an incoming call terminates to the Hotel/Motel Console from a Guest station of
the...

NEAX2400 IPX Hotel Feature Programming ManualPage 48NDA-24304, Issue 1
A-25 Attendant Console With Hotel Functions
24 ARSC Release the route restriction (RSC = 0) for the Console.
25 AAKPFunction 6 = GST2 (Foreign Guest)
Function 7 = ATT-Assist Wake-Up
Function 8 = Interposition Transfer
Table 7 Key Arrangement for Hotel Attendant Console
DATA
KEY ARRANGEMENT REMARKS B
4B3
00WUS: Wake Up Set
WUR: Wake Up Reset
DDS: Do Not Disturb Set
DDR: Do Not Disturb Reset
MWS: Message Waiting Set
MWR: Message Waiting...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 49
Audit Reports A-26
A-26Audit Reports
General Description
The NEAX2400 IPX provides AUDIT REPORT printout of all rooms assigned specific Room Status conditions.
For example, an AUDIT of all stations in DO NOT DISTURB [D-11] mode may be ordered. These REPORTS are
generated by key operation and function codes entered from the Hotel Console. AUDIT REPORTS available from
the printer are as follows:
Table 8 Audit Report
FUNCTION
PRINTOUT...

NEAX2400 IPX Hotel Feature Programming ManualPage 50NDA-24304, Issue 1
A-26 Audit Reports
Operating Procedure
To order AUDIT REPORTS printouts from the Console or Front Desk Terminal
1. Press theAUDkey. The associated lamp illuminates
2. Press theSTSkey. Dial the desired function code.
3. The function code is displayed. Press theENTERkey.
4. All displayed information is cleared and lamps are extinguished. Printout begins.
Service Conditions
1. VIP classification must be entered via PMS.
2. Room...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 51
Audit Reports A-26
2SYS1
ASYD
INDEX
168b
0Group Announcement Service (for Hotel system)
0/1 = Out/In Service
b
11:AuditReportinservice
b
2Not used
b
3
b4Off-Hook Alarm (Service)
0/1 = Out/In Service
b
5Destination for Off-Hook Alarm Termination
0/1 = Console/Station
b
6Destination for Priority Call Termination
0/1 = Console/Station
b
7Not used
STEP CMND EXPLANATION
3 AIOC Assign printer port to match SYS1, ASYD, INDEX 11, in Step 1...

NEAX2400 IPX Hotel Feature Programming ManualPage 52NDA-24304, Issue 1
A-48 Automatic Message Waiting Lamp Off
A-48Automatic Message Waiting Lamp Off
General Description
This feature provides for Guest station MESSAGE WAITING [M-6] lamps to automatically turn off after Guests
have called predetermined Administration Stations (i.e. Message Center) to retrieve messages.
Operating Procedure
When a Guest calls the Administration Station to retrieve a message, the MESSAGE WAITING [M-6] lamp on the
associated...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 53
Automatic Message Waiting Lamp Off A-48
STEP CMND BIT EXPLANATION
2SYS1
ASYD
INDEX
172b
0Message Waiting
Data transfer to/from PMS
when executing the service.
0/1 = Not to be executed/ To
be executed.
b1Message Registration
b
2Do Not Disturb, Room Cutoff
b
3Room Status
b
4Automatic Wake-Up, Group Announcement
b
5Room Change, Room Swap
b
6Room Data Change
b
7Not used
3SYS1
ASYD
INDEX
179b
0Ringing Duration for Automatic Wake-Up
b...

NEAX2400 IPX Hotel Feature Programming ManualPage 54NDA-24304, Issue 1
A-57 Alert Service
A-57Alert Service
General Description
In an emergency situation, the Console or Special Administration Station may initiate the ALERT SERVICE. All
Guest stations and Special Administration Stations are called, using a distinctive ringing pattern, and connected to
an emergency announcement.
At this time, if D
terms are used for Guest stations, the DtermLCDs will indicate emergency.
Operating Procedure
To set ALERT...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 55
Alert Service A-57
Service Conditions (cont’d)
2. Stations will be retried if the Guest does not answer, the line is busy, or the line is in LINE LOCKOUT
[L-3]. Stations in the Make Busy condition are not called. The unanswered Guest information is printed
out from the hotel printer. Note that the information is also printed out when the called station is a Guest
Room - D
term.
3. ALERT SERVICE overrides DO NOT DISTURB [D-11].
4....

NEAX2400 IPX Hotel Feature Programming ManualPage 56NDA-24304, Issue 1
A-57 Alert Service
2SYS1
ASYD
INDEX
182b
0Not used
b
1Called # printout (Alert Service)
0/1: No/Yes
b
2
When a Guest station has been called out by Alert Service, if that Guest station is
Busy, Locked Out, or under Make-Busy status, that information is printed out.
0/1 = Not Required/Required
b
3STA # Answers = Printout
0/1: No/Yes
b
4
When a Guest station has been called out by Alert Service, if that Guest station does
not answer,...