NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 97
Direct Page Connection D-23
D-23Direct Page Connection
General Description
This feature allows direct loop-to-loop connection for paging, enabling the Attendant to hold an incoming (IC) call,
page the desired party, then directly connect both parties after the paged party answers.
Operating Procedure
For IC call on a loop requiring paging
1. The Attendant presses theHOLDkey. The call is held on a loop.
2. The Attendant presses...

NEAX2400 IPX Hotel Feature Programming ManualPage 98NDA-24304, Issue 1
D-23 Direct Page Connection
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX
73b
0Type of Paging Service (only for calling)
b
1b0b1b0
0 0 = NoAnswer 1 0= Delay
0 1 = None Delay 1 1 = Delay with Paging Transfer b1
b2
Radio Page Number
(NEAX2400 IPX, 1 IMG = 2 Digits only)
0/1 = 2 digits/3 digits
b
3Paging Cancel Code
0/1 = Individual Paging Route Codes/Common to all Paging Routes
b
4Radio Paging - station number is...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 99
Direct Page Connection D-23
5ARTDAssign the paging route data.
(OSGS = 2, ONSG = 1, TCL = 8, L/T = 1)
6 ATRK Assign the LENS data of the Paging trunk.
7 MBTK Make idle the assigned Paging trunk.
8ASATAssign the Individual Attendant Access number.
(The number is used as the paging answer code.)
9 ARSC Allow the connection between the station RSC and incoming trunk route. STEP CMND EXPLANATION 

NEAX2400 IPX Hotel Feature Programming ManualPage 100NDA-24304, Issue 1
D-24 Direct Paging
D-24Direct Paging
General Description
This feature eliminates the need for the Attendant to dial for paging access. While pressing thePGkeyonthe
Console, the Attendant is directly connected to customer-provided paging equipment.
Operating Procedure
To establish connections to paging equipment, press thePGkey on the console and page the desired party.
Service Conditions
1. Paging equipment is to be customer...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 101
Direct Service Set/Reset D-25
D-25Direct Service Set/Reset
General Description
When the Attendant responds to Guest calls via theGSTorANSWERkey on the Console, or when a call is
answered at the Front Desk Terminal, DIRECT SERVICE is established by pressing the associated set/reset key.
Station number dialing, ENTER and EXIT operations are not required. DIRECT-SERVICE SET/RESET is
available for the following:
AUTOMATIC WAKE-UP...

NEAX2400 IPX Hotel Feature Programming ManualPage 102NDA-24304, Issue 1
D-25 Direct Service Set/Reset
Assignment Procedure
Refer to “Assignment Procedure” for DO NOT DISTURB [D-11], MESSAGE WAITING [M-6], AUTOMATIC
WAKE-UP [A-10], or ROOM CUTOFF [R-9]. 

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 103
Direct Station Selection D-26
D-26Direct Station Selection
General Description
Ten DIRECT STATION SELECTION (DSS) keys are provided on the Console for direct access to frequently called
Administration or service stations such as restaurant, valet, maid, etc.
Operating Procedure
Press the loop and the desiredDSSkeytooriginateacall.
Service Conditions
1. A maximum of ten keys are provided for DIRECT STATION SELECTION on each Console....

NEAX2400 IPX Hotel Feature Programming ManualPage 104NDA-24304, Issue 1
D-88 Directory Assistance Interface
D-88Directory Assistance Interface
General Description
This feature allows the Console operator to search for the station number of a Guest via the PMS terminal. The
Console must have a PMS terminal dedicated to directory assistance. The Guests name, station number, and other
information normally exchanged between the PMS and NEAX2400 IPX are entered into the PMS data base at
Check-In. The PMS will...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 105
Directory Assistance Interface D-88
Assignment Procedure
Note:Assign INDEX 191 when five or more PMS terminals are used and Even/Odd is determined by the last digit
of the Console Number.
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX
190b
0
I/O = Port designation to Host Computer
b
1
b2
b3
Not Used b4
b5
b6
Transmission Protocol between PBX and Host Computer
b
7
2SYS1
ASYD
INDEX
191
Noteb
0I/O = Port designation to Host Computer
b
1...

NEAX2400 IPX Hotel Feature Programming ManualPage 106NDA-24304, Issue 1
D-89 Direct Selection - Outside
D-89Direct Selection - Outside
General Description
Ten DIRECT STATION SELECTION (DSS) [D-26] keys are provided on the Console for direct access to
frequently called outside numbers or to emergency numbers such as fire, police, or ambulance.
Operating Procedure
To originate a call, pressLOOPkey and the desiredDSSkey.
Service Conditions
1. A maximum of ten keys are provided for DIRECT STATION SELECTION...