NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 107
DtermWith Hotel Function D-105D
D-105DDtermWith Hotel Function
General Description
This feature allows the users of 16-button or 24-button Dtermto control the following services by operating
programmable line/feature keys in the same manner as the keys of the Hotel Console. Fifteen programmable feature
keys are assigned to the Front Desk Terminal to provide full hospitality functionality.
AUTOMATIC WAKE-UP [A-10] Set/Reset...

NEAX2400 IPX Hotel Feature Programming ManualPage 108NDA-24304, Issue 1
D-105D DtermWith Hotel Function
Operating Procedure (cont’d)
4. Press theENDkey.
5. Press theCEkey to clear an entry such as a wrong station number.
 For ROOM STATUS [R-10]
Idle Condition
1. Press theSTSkey. The LCD shows the feature abbreviation.
2. Enter the Guest station number.
3. Press theENTkey.The MESSAGE WAITING [M-6] set, CHECK-IN/CHECKOUT [C-23] set, DO NOT
DISTURB [D-11] set, ROOM CUTOFF [R-9] set LEDs will illuminate if...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 109
DtermWith Hotel Function D-105D
Service Conditions (cont’d)
3. Only Special Administration Stations may be Front Desk Terminals.
4. MESSAGE WAITING [M-6] set from a Front Desk Terminal can only be reset from:
5. Front Desk Terminal, PMS Terminal, or Console (Model 60 PMS).
6. Front Desk Terminal or PMS Terminal (Model 90, 120 PMS).
7. During hospitality feature activation, performing any of the following actions will result in the...

NEAX2400 IPX Hotel Feature Programming ManualPage 110NDA-24304, Issue 1
D-105D DtermWith Hotel Function
Assignment Procedure
STEP CMND EXPLANATION
1 AASTAssigns Special Administration Station.
TEC = 12
2ASFCAssigns SFC of Special Administration Station.
SFI = 45
3 AKYDAssigns key data of D
term
Assignment of key data ofENT,CE,andENDkeys is mandatory.
Note:
TheRECALLkey will also function as anENDkey.
INDEXB
7
(0/1)FUNCTION KEY ASSIGNMENT
DATA (00 - FF)
(HEX) CONTENTS B6B5B4B3B2B1B0
80 1 0000100 84...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 111
Direct Data Entry - Station D-107
D-107Direct Data Entry - Station
General Description
This feature allows a maid or other hotel personnel to enter numeric data to the Property Management System (PMS)
computer, using the Guest room station for entry through dial operation.
Operating Procedure
1. Lift handset or press theSPEAKERkey. Hear dial tone.
2. Dial the Direct Data Entry access code. Hear special dial tone.
3. Dial input data...

NEAX2400 IPX Hotel Feature Programming ManualPage 112NDA-24304, Issue 1
D-150 Double Suite Room
D-150Double Suite Room
General Description
This service allows two suite rooms (single suite rooms) to be connected as a double suite room. Maximum eight
stations can be called simultaneously.
Figure 7 Example of Single/Double Suite Room
Operating Procedure
To call a double suite room
1. Lift the handset or press theSPEAKERkey. Receive dial tone.
2. Dial the primary station number of the double suite room. The...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 113
Double Suite Room D-150
Service Conditions (cont’d)
4. When all the telephones of the double suite room are rung simultaneously, the call is connected to the first
telephone which answers. When the call is answered, other telephones stop ringing.
5. Each of the telephones in the double suite room can originate the call independently.
6. When the stations that belong to the double suite room are accommodated in the same line circuit,...

NEAX2400 IPX Hotel Feature Programming ManualPage 114NDA-24304, Issue 1
D-150 Double Suite Room
2AHSY
INDEX
186b
0
Not used b
1
b2
b3
b4
b5
b6
b7Double Suite Room Service
0/1 = Out/In Service
3AHSY
INDEX
188b
0
Processing for Suite Room Station/Connecting Room Station Busy
b
1b0
00=BusyTone
0 1 = An idle station within the room is called
1 0 = The call is transferred to the Console if the caller is not the console operator. b
1
b2Fixed Data
b
3
b4Not used
b
5
When the call terminates to the Double Suite...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 115
Double Suite Room D-150
6 AHSUAssign the Guest Stations as the Suite Room Station.
Parameters
TN: Tenant
TYPE: Suite Room Type: S = Single; D = Double
PHANTOM: Phantom Number
M1: Primary Guest Station Number
S2-S4: Secondary Guest Station Number
Note:
In the NEAX2400 IPX, AHSU is also used to delete suite room programming.
STEP CMND EXPLANATION 

NEAX2400 IPX Hotel Feature Programming ManualPage 116NDA-24304, Issue 1
D-151 DD/MW Lamp Control
D-151DD/MW Lamp Control
General Description
This service allows the Message Waiting Lamp to be controlled by setting/cancelling DO NOT DISTURB [D-11]
service. The Message Waiting Lamp will either light or flash to distinguish which of the services (MESSAGE
WAITING [M-6] or DO NOT DISTURB [D-11]) is being activated.
Operating Procedure
Refer to the operating procedures of MESSAGE WAITING [M-6] and DO NOT...