NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 147
Group Restriction G-21
G-21Group Restriction
General Description
This feature allows the Guest stations in a group to be restricted per the following conditions.
1. GROUP RESTRICTION is categorized as follows:
Outgoing Call Restriction Guest stations in a group are restricted from originating a call.
Outgoing Station Call Restriction Guest stations in a group are restricted from making a call to
stations in the other groups....

NEAX2400 IPX Hotel Feature Programming ManualPage 148NDA-24304, Issue 1
G-21 Group Restriction
Operating Procedure (cont’d)
5. Press theENTkey. “OK” is displayed.
To cancel Group to Group Connection from the Console
1. Press theGRRkey.The GRRlamp lights and the console displays the title.
2. Enter “8”. The console displays the title according to the select number.
3. Enter the group number A.
4. Enter the group number B.
5. Press theENTkey. “OK” is displayed.
To operate from the PMS terminal, follow the...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 149
Group Restriction G-21
Service Conditions (cont’d)
8. When both restrictions of Outgoing Station Call Restriction and Outgoing C.O. Call Restriction are set,
Outgoing Call Restriction is established. When Incoming Station Call Restriction and Incoming C.O. Call
Restriction are set, Incoming Call Restriction is established. Setting both restrictions of Outgoing Call
Restriction and Incoming Call Restriction is the same as setting...

NEAX2400 IPX Hotel Feature Programming ManualPage 150NDA-24304, Issue 1
G-21 Group Restriction
Service Conditions (cont’d)
16. The restriction status is listed in order of the entered group numbers.
17. When the group number which is not assigned Group to Group Connection is ordered to be listed,
“GROUP NOT ASSIGN” is printed. If any groups are not allowed Group to Group Connection, “ALLOW
GRP NOTHING” will print.
Interactions
1. GROUP RESTRICTION is not available when DO NOT DISTURB [D-11D] or...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 151
Group Restriction G-21
2AHSY
INDEX
115~126
Note
ASSIGN REPLACEMENT CONNECTION OF RSC WHILE THE RESTRICTION
3AHSY
INDEX
243b
0SO: Outgoing Station Call Restriction
b
1
b2
b3
b4SI: Incoming Station Call Restriction
b
5
b6
b7
STEP CMND BIT EXPLANATION
Hotel Attendant Console Key Data
81H - WU SET 91H - CHECK-IN
82H - WU RESET 92H - CHECKOUT
83H - MW SET 93H -
84H - MW RESET 94H -
85H - DD SET 95H - C.O. CHANGE
86H - DD RESET 96H -...

NEAX2400 IPX Hotel Feature Programming ManualPage 152NDA-24304, Issue 1
G-21 Group Restriction
4AHSY
INDEX
244b
0SOI: Outgoing/Incoming Station Call Restriction
b
1
b2
b3
b4
OG: Outgoing Call Restriction
b
5
b6
IC:IncomingCallRestriction
b
7
5AHSY
INDEX
246b
0CO: Outgoing C.O. Call Restriction
b
1
b2
b3
b4CI:IncomingC.O.CallRestriction
b
5
b6
b7
6AHSY
INDEX
247b
0COI: Outgoing/Incoming C.O. Call Restriction
b
1
b2
b3
b4
Not used b5
b6
b7SV: 0/1 = Service Out/In
7 Assign Station Call Restriction for the...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 153
Group Restriction G-21
Note 1:It is necessary to assign data to the corresponding console keys when AHSY Index 114, Bit 5 is assigned.
Note 2:If the Desk Console is used, the key indications and INDEXes are different from the NEAX2400 IPX
Attendant Console. Refer to the figure below.
STEP CMND EXPLANATION
7N ASCRAssign Mutual Outgoing Station Call Restriction
Assign optional restriction data with the combination of the following...

NEAX2400 IPX Hotel Feature Programming ManualPage 154NDA-24304, Issue 1
G-24 Guest Station - Dterm
G-24Guest Station - Dterm
General Description
This feature allows the Dtermto be used as a Guest station in the Hotel System. Various useful features such as
HANDS FREE ANSWER BACK - Dterm[H-4D] and MULTIPLE LINE OPERATION - Dterm[M-20D] have
become available for Guest room stations.
In addition to time display,
The DtermLCD is used for the following Hotel services:
AUTOMATIC WAKE-UP [A-10]
CALLING STATION...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 155
GuestStation-DtermG-24
3AHSY
INDEX
105b
0Not used
b
1
b2Maid Dial service from Console
0/1 = Not Required/Required
b
3Not used
b
4
Pattern of Wake Up time indication on the Console
0/1=24Hour/12 Hour System
Irrespective of data assignment for this bit, 24-hour time display is applied for Automatic
Wake-Up/2nd Wake Up Call.
b
5Not used
b
6
b7Guest Name Display on Console
0/1 = Interface Type Model 60, 90, 120/Model 90, 120
4AHSY...

NEAX2400 IPX Hotel Feature Programming ManualPage 156NDA-24304, Issue 1
H-8 House Phone/Hot Line
H-8House Phone/Hot Line
General Description
This feature allows selected stations to reach the Attendant (house phone) or a predesignated station (hot line) by
going off-hook. House phones are normally provided in a hotel lobby or restaurant.
Operating Procedure
1. The HOUSE PHONE/HOT LINE user goes off-hook. The Attendant (or other predesignated station) is
called.
2. The attendant answers via...