NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 167
Language Service L-27
3AHSY
INDEX
100b
0Number of times of Wake-Up Answer Retry.
b
1
b2Number of characters of language information display
0/1 = Up to 7 Languages/Up to 15 Languages
b
3Restriction for hooking when a Guest station has originated an outgoing C.O. line call.
0/1 = Not Required/Required
b
4Not used
b
5
b6
Overtime Call when a station user places a C.O. trunk call
0 = Administration and Guest go to CONSOLE
1 = Guest...

NEAX2400 IPX Hotel Feature Programming ManualPage 168NDA-24304, Issue 1
L-27 Language Service
6AHSY
INDEX
183b
0
Setting of Hotel/Motel Console that sets Alert Service
0 Hex: Service can be set from any of the Console
1-F Hex: Service can be set only from the Console of the designated Console Number b1
b2
b3
b4
Classifying the call termination indicating keys on the basis of the Language
category of the Guest at the time an incoming call from a Guest station has
terminated to the Hotel/Motel Console.
0/1...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 169
Message Waiting M-6
M-6Message Waiting
General Description
This feature allows the Console, PMS terminal, or Front Desk Terminal to illuminate a lamp on an individual station
to indicate when a message is waiting. With the AUTOMATIC MESSAGE WAITING LAMP OFF [A-48] feature,
the MW lamp is automatically extinguished when the Guest calls to retrieve messages from the message center.
Refer to the AUTOMATIC MESSAGE WAITING LAMP OFF...

NEAX2400 IPX Hotel Feature Programming ManualPage 170NDA-24304, Issue 1
M-6 Message Waiting
Service Conditions (cont’d)
3. Message Waiting set from Message Center Interface cannot be displayed at the Front Desk Terminal or
Console. Message Waiting set from Message Center Interface must be cancelled from message Center
Interface.
4. For the conditions of the LCD display when several services are set to a Guest room D
termat the same
time, see Service Conditions of AUTOMATIC WAKE-UP - Dterm[A-10D]....

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 171
Message Waiting M-6
3AHSY
INDEX
139b
0Not used
b
1
b2MW Lamp Indication of “Do Not Disturb”
0/1 = Lights Steadily/Flashes
b
3MW Lamp Indication of “Do Not Disturb”
0/1 = Not Required/Required
b
4Message Waiting Lamp
0/1 = Lights Steadily/Flashes
b
5Message Waiting Lamp Control
0/1 = In/Out Service
b
62-Line Guest Name Display on a Dterm
0/1 = Out/In Service
b
7Not used
4AHSY
INDEX
403b
0
Processing when Checkout Result (Feature Code...

NEAX2400 IPX Hotel Feature Programming ManualPage 172NDA-24304, Issue 1
M-22 Maid Status
M-22Maid Status
General Description
This feature allows the Console, Special Administration, or Guest room stations to update the status of Guest room
conditions. This information is stored in the NEAX2400 IPX Hotel Processor (HP) for printout services, and is
forwarded to the PMS computer for readout. AUDIT REPORTS [A-26] of MAID STATUS are also available. Refer
to the AUDIT REPORTS [A-26] feature description for...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 173
Maid Status M-22
Operating Procedure (cont’d)
Note 3:If the Maid ID code is not in service, the following will be displayed on the LCD (if Dtermis used for a Guest
station) after the Maid Status access code is dialed:
Note 4:This display appears when the “To Be Cleaned,” “Cleaned,” “Ready to Sell,” or “Out of Service” status
is assigned.
To set from the Console
1. Press theSTSkey. The associated lamp illuminates.
2. Dial the Guest...

NEAX2400 IPX Hotel Feature Programming ManualPage 174NDA-24304, Issue 1
M-22 Maid Status
Service Conditions (cont’d)
7. When the room is in “Check-In” status, only the “To Be Cleaned” or “Cleaned” status can be assigned.
When the room is in “Check-out” status, any MAID STATUS can be assigned.
8. After the maid or repairman dials Maid Status access code from Guest room station, either service set tone
or confirmation announcement can be provided, according to selection by the NEAX2400 IPX. (The...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 175
Maid Status M-22
2SYS1
ASYD
INDEX
164b
0
Assignment of ID Code Information
b
2b1b0b2b1b0
00 0=Notused 1 0 0=4digits
0 0 1 = 1digit 1 0 1=5digits
01 0=2digits 1 1 0=6digits
01 1=3digits 1 1 1=Notused
Note:
Do not assign “000” or “111”.
b1
b2
b3ID Code for setting/canceling Maid Status
0/1 = Not Required/Required
b
4Number of Digits of Group Code (PMS option)
b
5
b6
b7
ID Code to be entered when setting or canceling Automatic Wake-Up...

NEAX2400 IPX Hotel Feature Programming ManualPage 176NDA-24304, Issue 1
M-22 Maid Status
5AHSY
INDEX
49 - 54Maid Status Information Display
For information display at the time of Stay, assign the related data by two characters of
ASCII code.
Stay Index 49-50
Stay Cleaning Index 51-52
Stay Inspection Index 53-54
6AHSY
INDEX
105b
0Not used
b
1
b2Maid Dial service from Console
0/1 = Not Required/Required
b
3Not used
b
4Pattern of Wake Up Time Indication on the Console
0/1 = 24-Hour/12-Hour System
b
5Not...