NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 137
Guest Information Display - DtermG-7D
2AHSY
INDEX
110b
0
Room key Interface
0: Interface is absent (STAY/OUT is displayed)
1: Interface is present (Key status is displayed)
b
1Hotel-ATT Guest Information Service
0/1 = Not Required/Required
b
2Not used
b
3Called Number Display on the Hotel Console
0/1 = Out/In Service
b
4
Not used b5
b6
b7Guest Name Display - Dterm, Guest Information Display Dterm/PMS Terminal
0/1 = Out/In Service...

NEAX2400 IPX Hotel Feature Programming ManualPage 138NDA-24304, Issue 1
G-8 Guest Information Display - Hotel Attendant Console
G-8Guest Information Display - Hotel Attendant
Console
General Description
This feature allows Guest information to be displayed on a PMS terminal corresponding to the Console in the
following cases:
 When the Console receives a call from a Guest station
 When the Console originates a call to a Guest station
Operating Procedure
Termination from Guest Station
1. A call from the...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 139
Guest Information Display - Hotel Attendant Console G-8
Assignment Procedure
STEP CMND BIT EXPLANATION
CRT CONTROL EVEN GROUP QUEUE NOTE
1SYS1
ASYD
INDEX
190b
0
I/O = Port designation to Host Computer
b
1
b2
b3
Not used b4
b5
b6Transmission Protocol between PBX and Host Computer
b
7
CRT CONTROL ODD GROUP QUEUE NOTE
2SYS1
ASYD
INDEX
191
Noteb
0
I/O = Port designation to Host Computer
b
1
b2
b3
Not used b4
b5
b6Transmission Protocol...

NEAX2400 IPX Hotel Feature Programming ManualPage 140NDA-24304, Issue 1
G-8 Guest Information Display - Hotel Attendant Console
Note:Assign INDEX 191 when five or more PMS terminals are used and Even/Odd is determined by the last digit
of the Console Number.
4AHSY
INDEX
110b
0
Room key Interface
0: Interface is absent (STAY/OUT is displayed)
1: Interface is present (Key status is displayed)
b
1Hotel - ATT Guest Information Service
0/1 = Not Required/Required
b
2Not used
b
3Called Number Display on the...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 141
Guest Information Display - PMS Terminal G-9
G-9Guest Information Display - PMS Terminal
General Description
This feature allows Guest information to be displayed on a Special Administration Station using a PMS port in the
following cases:
 When a Special Administration Station receives a call from a Guest Station.
 When a Special Administration Station originates a call to a Guest Station.
Operating Procedure
Call termination...

NEAX2400 IPX Hotel Feature Programming ManualPage 142NDA-24304, Issue 1
G-9 Guest Information Display - PMS Terminal
Assignment Procedure
STEP CMND BIT EXPLANATION
CRT CONTROL EVEN GROUP QUEUE NOTE 1
1SYS1
ASYD
INDEX
190b
0
I/O = Port designation to Host Computer
b
1
b2
b3
Not used b4
b5
b6Transmission Protocol between PBX and Host Computer
b
7
CRT CONTROL ODD GROUP QUEUE NOTE 1
2SYS1
ASYD
INDEX
191b
0
I/O = Port designation to Host Computer
b
1
b2
b3
Not used b4
b5
b6Transmission Protocol between PBX...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 143
Guest Information Display - PMS Terminal G-9
Note 1:Assign INDEX 191 when five or more PMS terminals are used.
Note 2:Depending on the last digit of the Station Number, Even Group Queue or Odd Group Queue is determined
if five or more PMS terminals are used.
3AHSY
INDEX
110b
0
Room key Interface
0: Interface is absent (STAY/OUT is displayed)
1: Interface is present (Key status is displayed)
b
1Hotel - ATT Guest Information Service...

NEAX2400 IPX Hotel Feature Programming ManualPage 144NDA-24304, Issue 1
G-11 Guest Room Calling - Hotel Attendant
G-11Guest Room Calling - Hotel Attendant
General Description
This feature allows the Console operator to display Guest room information before calling a Guest room.
Operating Procedure
1. The attendant answers an incoming call.
2. The attendant dials the Guests room number. The Guest room information is displayed on the Console.
Guest station status is indicated on the Direct Station...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 145
Guest Room Calling - Hotel Attendant G-11
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX
70b
0Called Number Display when Call Forwarding to Console
0/1 = Out/In Service
b
1Flashing display of Line Lockout on Console BLF
0/1 = In/Out Service
b
2
Route No. Display on Console
b
3
b4One digit dialing instead of SHF (DP TEL only)
0/1 = Not Required/Required
b
5
Priority order for answering via ANSWER key
0 = Priority...

NEAX2400 IPX Hotel Feature Programming ManualPage 146NDA-24304, Issue 1
G-11 Guest Room Calling - Hotel Attendant
3SYS1
ASYD
INDEX
161b
0Don’t Disturb Override key on Console
0/1 = Out/In Service
b
1Message Waiting Lamp in Service
0/1 = Out/In Service
b
2Language Service
0/1 = Out/In Service
b
3Screening Service
0/1 = Out/In Service
b
4Not used
b
5DSS (Direct Station Section) Keys
0/1 = Out/In Service
b
6Timing Start using “#” Code
0/1 = Ineffective/Effective
b
7Timing Start using “*” Code
0/1 =...