NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 87
Do Not Disturb D-11
6AHSY
INDEX
139b
0Not used
b
1
b2MW Lamp Indication of “Do Not Disturb”
0/1 = Lights Steadily/Flashes
b
3MW Lamp Indication of “Do Not Disturb”
0/1 = Not Required/Required
b
4MW Lamp Indication of “Message Waiting”
0/1 = Lights Steadily/Flashes
b
5MW Lamp Indication of “Message Waiting”
0/1 = Not Required/Required
b
62-Line Guest Name Display on a Dterm
0/1 = Out/In Service
b
7Not Used
7AHSY
INDEX
266b
0Not Used...

NEAX2400 IPX Hotel Feature Programming ManualPage 88NDA-24304, Issue 1
D-11 Do Not Disturb
11 ARSCWhen “1” has been assigned by SYS1, INDEX 170, Bit 3, assign restriction data to RSC 14 and
15.
Note:
Steps after ARTD are necessary only when the destination of the tone of Do Not Disturb call is designated
as Announcement Machine.
12 ARTDAssign the route data of the trunk which interfaces with the announcement unit (OSGS = 2, TCL
= 4 should be set).
13 ATRK Assign the trunk interfacing with the...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 89
Do Not Disturb - DtermD-11D
D-11DDo Not Disturb - Dterm
General Description
This feature allows a Guest room Dtermto temporarily block incoming calls. Outgoing calls may still be placed from
stations in DO NOT DISTURB (DD) mode.
Operating Procedure
To set DO NOT DISTURB from Guest Room Dterms
1. Lift handset or press theSPEAKERkey. Receive dial tone.
2. Dial the DD set code. Receive service set tone. The LCD displays:
3. Hang up. If...

NEAX2400 IPX Hotel Feature Programming ManualPage 90NDA-24304, Issue 1
D-11D Do Not Disturb - Dterm
Service Conditions (cont’d)
8. Station in DD mode can receive calls from specific trunk routes or stations through system data
assignment.
9. Guest “Boss” and “Secretary” rooms override DD mode for calls between assigned stations.
10. DO NOT DISTURB set by Special Administration Station can be cancelled by Guest station, and vice
versa.
11. This feature and DO NOT DISTURB - D
termin BUSINESS FEATURE are...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 91
Do Not Disturb - DtermD-11D
3SYS1
ASYD
INDEX
162b
0Destination of connection when a connection between Guest stations is restricted.
b
1
b2Destination of connection when Room Cutoff is assigned.
b
3
b4Assignment of destination for Do Not Disturb.
b
5
b6Tone to be given when a wake up call is answered.
b
7
4SYS1
ASYD
INDEX
170b
0Room status data (b2,b1,b0)tobesetatthetimeofCheckout
Note:
Do not assign other data.
b1
b2
b3
Assignment...

NEAX2400 IPX Hotel Feature Programming ManualPage 92NDA-24304, Issue 1
D-11D Do Not Disturb - Dterm
5SYS1
ASYD
INDEX
172b
0Message Waiting
Data transfer to/from PMS
when executing the service.
0/1 = Not to be executed/To be
executed b
1Message Registration
b
2Do Not Disturb, Room Cutoff
0/1: Out/In Service
b
3Room Status
b
4Automatic Wake up, Group Announcement
b
5Room Change, Room Swap
b
6Room Data Change
b
7Not used
6AHSY
INDEX
77b
0LCD Indication of Wake-Up time on the Dterm
0/1 = -/Remains lit
b
1LCD...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 93
Do Not Disturb - DtermD-11D
8AHSY
INDEX
376b
0Not usedText sent to PMS printout
0/1 = Not Required/Required
If “1” is assigned to the
corresponding bit, the text is
output to the Hotel printer.
Note:
When a failure has
occurredtoadatalink
between the
NEAX2400 IPX and
the PMS, the
pertaining error
information is printed
out.
b1Maid Status-Guest (Feature Code = 11)
b
2Maid Status-Admin. (Feature Code = 12)
b
3Message Waiting Lamp...

NEAX2400 IPX Hotel Feature Programming ManualPage 94NDA-24304, Issue 1
D-15 Day/Night Class of Service
D-15Day/Night Class of Service
General Description
This feature permits all stations within a tenant to alternate between two different CLASS OF SERVICE -
INDIVIDUAL [C-15] options, one for Day mode and another for Night mode. System data can be programmed so
that once the ATTENDANT CONSOLE [A-3] has entered the NIGHT CONNECTION [N-1, 2] mode, a stations
CLASS OF SERVICE - INDIVIDUAL [C-15] will be...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 95
Day/Night Class of Service D-15
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX 75b
0Route Restriction Class Data (“ARSC” command)
0/1 = Common/Separate
Table Development:
Common or Separate Day/
Night Data Tables.
Note:
When data tables
are designated as
“Common”, the
Day mode
designation must be
used in the
respective
commands.
b1
Service Feature Restriction Class Data (“ASFC”
command)
0/1 = Common/Separate
b...

NEAX2400 IPX Hotel Feature Programming ManualPage 96NDA-24304, Issue 1
D-15 Day/Night Class of Service
6 ATNR Assign Day/Night data.
7 AEFR Assign Day/Night data.
8 ASPF Assign Day/Night data.
9 ASCR Assign Day/Night data.
10 ATCR Assign Day/Night data. ATCR will override ASCR on restriction.
11 ADNRAssign the Time for Day mode and Night mode, if automatic change of Route Restriction Class
(RSC) is necessary. STEP CMND EXPLANATION