NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 77
Connecting Room Service C-72
C-72Connecting Room Service
General Description
This feature allows the PMS to connect two rooms on a temporary basis to act as one room. One room will act as
the primary room and the other to act as a secondary room. If suite rooms are to be connected, the primary station
in the suite room arrangement is used for connecting room purposes.
Operating Procedure
CONNECTING ROOM SERVICE assignment is made...

NEAX2400 IPX Hotel Feature Programming ManualPage 78NDA-24304, Issue 1
C-72 Connecting Room Service
Service Conditions (cont’d)
13. When the Console dials the primary station, the DSS keys and lamps are used in the operation. The status
of the connecting room phones appear on the DSS lamps. Ringing is generated at the connecting room
phones when the first DSS key is pressed or the START key is pressed. If a secondary phone DSS key is
pressed, only the corresponding secondary phone will ring. The DSS lamp...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 79
Connecting Room Service C-72
2AHSY
INDEX
111b
0Fixed Data
b
1
b2Not used
b
3
Setting of Message Registration Data to be sent out to the PMS
b
4b3
0 0 : The pilot number is sent out in the case of Suite Room; the Main Room
StationNumberissentoutinthecaseofConnectingRoom.
0 1 : The station Number of each station within the room is sent out. b
4
b5Not used
b
6
b7Connecting Room
0/1 = Out/In Service
3AHSY
INDEX
185b
0Not used
b
1Suite...

NEAX2400 IPX Hotel Feature Programming ManualPage 80NDA-24304, Issue 1
C-72 Connecting Room Service
5AHSY
INDEX
189b
0
Not used b
1
b2
b3
b4
b5
Suite Room Individual Station Calling
0 = A Suite Room individual station can be called from a Guest Station, Administration
Station, and Console.
1 = A Suite Room individual station can be called from a Special Administration Station
and Console.
b
6
Ringing at time of general calling in the Connecting Room or Suite Room stations
0 = Ringing all stations
1 =...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 81
Call Information Display C-147
C-147Call Information Display
General Description
This feature allows the following information to be displayed on the Guest room DtermsLCD.Dtermmay be used
for Guest stations.
Calling/Called Station
AUTOMATIC WAKE-UP - D
term[A-10D]
ALERT SERVICE [A-57]
DO NOT DISTURB - D
term[D-11D]
DIRECT DATA ENTRY - STATION [D-107]
MESSAGE WAITING [M-6]
MAID STATUS [M-22]
ROOM CUTOFF [R-9]
2ND WAKE-UP CALL - SAME...

NEAX2400 IPX Hotel Feature Programming ManualPage 82NDA-24304, Issue 1
C-147 Call Information Display
Operating Procedure (cont’d)
e.) During a call through Tie line in progress:
-OR-
2. For other display services, see each service feature description.
Service Conditions
1. When the Guest name two-line display is provided by the system parameters, the time display (lower line)
disappears during a call.
2. When originating a call using the ISDN terminal, the charging information is not displayed....

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 83
Do Not Disturb D-11
D-11Do Not Disturb
General Description
This feature allows the Console, PMS terminal, Front Desk Terminal, Special Administration Station, or Guest
Station to temporarily place individual stations into a mode that blocks incoming calls. Outgoing calls may still be
placed from stations in DO NOT DISTURB (DD) mode.
Operating Procedure
To set DO NOT DISTURB from the Console or Front Desk Terminal
1. Press theDD(set)...

NEAX2400 IPX Hotel Feature Programming ManualPage 84NDA-24304, Issue 1
D-11 Do Not Disturb
Operating Procedure (cont’d)
Note:For the Console and Front Desk Terminal only:
If an error is made in the course of key operations, press theCLEARkey and continue from Step 2 (station
dialing).
When setting or cancelling DO NOT DISTURB for two or more stations at the same time, follow the above
operating procedure for the first station. Perform Steps 2 and 3 for the remaining stations, then Step 4 to
exit from the...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 85
Do Not Disturb D-11
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX
160b
0Hotel Feature required (Fixed Data)
b
1Hotel Service kind (Fixed Data)
b
2Length of Room Status Memory
0/1 = 8 byte/24 byte
b
3Pattern of Key Arrangement on Attendant Console
(Refer toFigure 4) (Usually, 00)
b
4
b5Guest Name Service
0/1 = Out/In Service
b
6Numbering Plan Data Table of Guest and Administration stations
0/1 = Separate/Common
b...

NEAX2400 IPX Hotel Feature Programming ManualPage 86NDA-24304, Issue 1
D-11 Do Not Disturb
4SYS1
ASYD
INDEX
170b
0Room status data (b2,b1,b0) to be set at the time of Checkout
Note:
Do not assign other data.
b1
b2
b3
Assignment of Restriction Method in Do Not Disturb Status
0/1 = Restricted/Restriction Method according to RSC
Note:
If unconditional restriction is set as per the OG restriction and IC
restriction information, or if OG restriction and IC restriction are set to
Guest stations, the present...