NEC Neax 2400 Ipx Hotel Feature Programming Manual

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 57
Automatic Wake-up - Hotel Attendant A-58
A-58Automatic Wake-up - Hotel Attendant
General Description
When AUTOMATIC WAKE-UP [A-10] is set to the Guest station with VIP status and it is time for the Guest to be
awakened, the call will ring the Console. When answered, the call is extended to the Guest. The Guest will be greeted
by the attendant rather than a recorded announcement.
Operating Procedure
To operate from the Console
1. On...

NEAX2400 IPX Hotel Feature Programming ManualPage 58NDA-24304, Issue 1
A-58 Automatic Wake-up - Hotel Attendant
Service Conditions (cont’d)
8. The console displays “ATC”, and no other result is sent to PMS when the Attendant answers the call.
9. Setting and cancelling WAKE-UP services are restricted from administration stations, the Console, the
PMS Terminal, a Front Desk Terminal, or predetermined Special Administration Station if the feature was
set by the Guest room station. These restrictions are...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 59
Automatic Wake-up - Hotel Attendant A-58
2AHSY
INDEX
184b
0
Not used b
1
b2
b3
b4
b5
b6Processing for “No Answer” at the Console in the case where Automatic Wake-Up
Attendant - Assistance service is provided.
b
7b6
0 0 Changeover to Automatic Wake-Up
0 1 No processing for “No Answer”
1 0 Call termination to Console is cancelled
1 1 All Wake-up calls are terminated to the Console
(including Automatic Wake-Up Call)
Note:
This data is...

NEAX2400 IPX Hotel Feature Programming ManualPage 60NDA-24304, Issue 1
A-73 Automatic Multiple Attendant Recall
A-73Automatic Multiple Attendant Recall
General Description
This feature is a variation of the Automatic Recall feature of the NEAX2400 IPX. When the Attendant answers an
incoming trunk call, dials the station, and presses the RELEASE key, the automatic-recall timer is activated. The
dialed station rings, but if it is unanswered within the customer-defined recall time, the call is directed to...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 61
Automatic Multiple Attendant Recall A-73
Service Conditions (cont’d)
11. The “Called Number” displayed is the number of the station that is ringing when the attendant presses the
RELEASEkey. If the call has been forwarded, this number is not the same as the dialed number.
12. Automatic Multiple Attendant Recall is not available for calls transferred to stations over CCIS.
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD...

NEAX2400 IPX Hotel Feature Programming ManualPage 62NDA-24304, Issue 1
A-74 Answering Camp-On/Call Hold Calls By Switchhook Flash
A-74Answering Camp-On/Call Hold Calls By
Switchhook Flash
General Description
This feature allows a busy Guest station to answer a CAMP-ON or CALL HOLD call automatically by using switch
hook flash.
Operating Procedure
To answer a CAMP-ON call
1. The Attendant executes ATTENDANT CAMP-ON WITH TONE INDICATION [A-1]. A busy Guest
station user hears a camp-on tone indication.
2....

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 63
Answering Camp-On/Call Hold Calls By Switchhook Flash A-74
Service Conditions (cont’d)
4. The operating procedure for CALL HOLD - Dterm[C-6D] using FLASH BUTTON - Dterm[F-3D] is
replaced by this feature when enabled in system data.
5. The function of the TRANSFER key on the D
termdoes not change when this feature is enabled.
6. The limitations for ATTENDANT CAMP-ON WITH TONE INDICATION [A-1] and for CALL HOLD
[C-6] apply to this...

NEAX2400 IPX Hotel Feature Programming ManualPage 64NDA-24304, Issue 1
A-75 Automated Guest Station Voice Mail Retrieval
A-75Automated Guest Station Voice Mail Retrieval
General Description
AUTOMATED GUEST STATION VOICE MAIL RETRIEVAL (VMR) is a feature that makes it easy for Guest
stations to retrieve voice mail. Guest stations dial a Voice Mail Retrieval (VMR) access code and a station password
for immediate message retrieval. The feature is customer-programmable to allow it to conform to the needs of...

NEAX2400 IPX Hotel Feature Programming Manual
NDA-24304, Issue 1Page 65
Automated Guest Station Voice Mail Retrieval A-75
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX
252b
0~b7First set of digits
“0-9”, “A-E”, with “0” denotes end of data; “E” denotes
calling station.
A= 0 B = * C = #
D = 1 sec. delay 2SYS1
ASYD
INDEX
253b
0~b7Second set of
digits
3SYS1
ASYD
INDEX
254b
0~b7Third set of digits
4SYS1
ASYD
INDEX
255b
0~b7Fourthsetofdigits
STEP CMND EXPLANATION
5 ASFC0-15
SFI - 110 RES = 1 

NEAX2400 IPX Hotel Feature Programming ManualPage 66NDA-24304, Issue 1
B-26 Busy Status - Hotel Attendant
B-26Busy Status - Hotel Attendant
General Description
When the Hotel Attendant calls a Guest station that is busy, BUSY STATUS DISPLAY - HOTEL ATTENDANT
causes the current status of the called Guest station to display in detail on the console LCD.
The following figures show the LCD displays for each status.
1. When the called station receives dial tone (off-hook status):
2. When the called station is...