NEC Neax 2400 Imx Hotel Office Data Specification

							NDA-24288 CHAPTER 4
Page 249
Revision 1.0
AHSU
AHSU: Assignment of Suite Room Station Number
1. General
When the system provides Suite Room Service and/or Double Suite Room Service, this command assigns a
specific guest station as a suite room station.
2. Precautions
1. This command is used for the Hotel Application only.
2. Before assigning Suite Room Service or Double Suite Room Service, ensure the system data in AHSY
command, INDEX=187, 188, 189 has been properly assigned.
3. The station to be assigned as a suite room station must have already been assigned as a guest room.
4. A phantom number can be assigned to the primary guest station of a suite room.
5. Branch stations are not included in the number of suite room stations. 
6. The primary guest station of a suite room must be assigned without exception. 
						

							CHAPTER 4 NDA-24288
Page 250
Revision 1.0
AHSU
3. Data Entry Instructions
TENANT NUMBER (TN)
TYPE
   
PHANTOM
    NUMBER
  (PHANTOM)
MAX. 6 DIGITS SUITE ROOM PRIMARY
              STATION
       (PRIMARY STN)         SUITE ROOM
         SECONDARY
           STATION 1
  (SECONDARY STN 1)        SUITE ROOM
        SECONDARY
          STATION 2
  (SECONDARY STN 2)        SUITE ROOM
        SECONDARY
          STATION 3
  (SECONDARY STN 3)
PHANTOM
SECONDARY 1/2/3
PRIMARY STATION NUMBER 1  (PRIMARY STN 1) PRIMARY STATION NUMBER 2  (PRIMARY STN 2)
PRIMARY STN 1PRIMARY STN 2
Primary station number
of Primary Suite Room  Primary station number
of Secondary Suite RoomWhen phantom number is not assigned, enter return key.
When secondary number is not assigned, enter return key. 0 = Single Suite Room
1 = Double Suite Room Note
Note:    When assigning Double Suite Room, Single Suite Room data assignment is necessary in advance.
When TYPE=0 (Single Suite Room)
When TYPE = 1 (Double Suite Room)
STATION NUMBER (STN)       TYPE (TYPE) 0/1 
						

							NDA-24288 CHAPTER 4
Page 251
Revision 1.0
AHSU
4. Data Sheet
(a) When TYPE = 0 (Single Suite Room)
TENANT
NUMBER
(TN)TYPE
(TYPE)
 0/1STATION
NUMBER
(STN)PHANTOM
 NUMBER
(PHANTOM)
Max. 6 DIGITSSUITE ROOM
PRIMARY
STATION
(PRIMARY)SUITE ROOM
SECONDARY
STATION 1
(SE CONDARY 
STN 1)SUITE ROOM
SECONDARY
STATION 2
(SECONDARY 
STN 2)SUITE ROOM
SECONDARY
STATION 3
(SECONDARY 
STN 3)
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0 
						

							CHAPTER 4 NDA-24288
Page 252
Revision 1.0
AHSU
(b) When TYPE = 1 (Double Suite Room)
TENANT
NUMBER
(TN)TYPE
(TYPE)
0/1STATION NUMBER
 (STN) PRIMARY STATION
 NUMBER 1
(PRIMARY STN 1)PRIMARY STATION
 NUMBER 2
(PRIMARY STN 2)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 
						

							NDA-24288 CHAPTER 4
Page 253
Revision 1.0
ADSS
ADSS: Assignment of Direct Station Select
1. General
This command assigns the called number data corresponding to the Hotel Attendant Console’s Direct Station
Select (DSS) key.
2. Precautions
1. This command is used for the Hotel Application only.
2. The DSS function is only valid for the Hotel Attendant Console and may not be assigned for Business
System Console.
3. DSS Function Key Numbers are 1 to 10. These ten numbers correspond to values 1 to 10 for the DSS
parameter of this command.
4. This feature must be enabled in ASYD, SYS1, INDEX 161, bit5 in order to operate.
3. Data Entry Instructions
ATT
Enter the Attendant 
number.DC
Destination number to be called frequently station 
number, the specific  outside party number (including 
the originating ACC).
DSS
Enter DSS Key number (1-10) ATTENDANT NUMBER (ATT)              DIRECT STATION SELECT KEY
            NUMBER  (DSS)DIGIT CODE  (DC)
  Max. 14 DIGITS 
						

							CHAPTER 4 NDA-24288
Page 254
Revision 1.0
ADSS
4. Data Sheet
ATTCON No. 
(ATN)DSS KEY No.
(DSS)
1 – 10DIGIT CODE
(DC)
MAX. 14 DIGITS
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10 
						

							NDA-24288 CHAPTER 4
Page 255
Revision 1.0
ASPF
ASPF: Assignment of Special Access Code Floor
1. General
This command assigns Floor Data for the Access Code of the Floor Service.
2. Precautions
1. This command is used for the Hotel Application only.
2. When assigning data using this command, the ASYD command, SYS 1, INDEX 165, bit7 = 1 (Floor
Service is provided) must have been assigned.
3. When assigning data using this command, the Access Code for Floor Service must have been assigned by
the AASP/AGSP command, SSC = 2, SID 56.
4. When deleting data for this command, the Access Code for Floor Service must be deleted in advance by
the AASP/AGSP command.
3. Data Entry Instructions
D/NANX
FLR
NO.
G
DC D : Day Mode
N : Night Mode
CALLED PARTY
 INFORMATIONCALLING PARTY INFORMATION
  CALLED
  NUMBER
      (DC)
Max. 6 digits  DAY/
NIGHT
MODE
 (D/N)
  D/NTENANT
NUMBER
    (TN)SERVICE
  INDEX
NUMBER
(NO.) 0-15ANNEX
  (ANX)
    0-3  GROUND
FLOOR AND
   ABOVE/
   BELOW
       (G)
       0/1  FLOOR
 NUMBER 
(FLR)1-127 0 : Main Building
1 : Annex 1
2 : Annex 2
3 : Annex 3Floor Number (1-127)
Enter SERVICE INDEX NUMBER
(NO.) assigned in the AASP/AGSP
command.Ground/Underground
0 : Ground
1 : UndergroundEnter the called number such as a station
number. 
						

							CHAPTER 4 NDA-24288
Page 256
Revision 1.0
ASPF
4. Data Sheet
CALLED PARTY
INFORMATIONCALLING PARTY INFORMATION
CALLED
STATION
NUMBER
(DC)
MAX. 6 DIGITS DAY/ NIGHT
MODE
(D/N)
D/NTENANT
NUMBER
(TN)SERVICE INDEX
NUMBER (No.)
0 – 15ANNEX
(ANX)
0 – 3GROUND
FLOOR
AND
ABOVE/BELOW
GROUP
(G)
0/1FLOOR
NUMBER
(FLR)
1 – 127