NEC Neax 2400 Imx Hotel Office Data Specification
Have a look at the manual NEC Neax 2400 Imx Hotel Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24288 CHAPTER 4 Page 149 Revision 1.0 AGSP (f) Register Sender Least Cost Routing Access Code (SRV = LCRS) TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/HKIND OF SERVICE (SRV)FLEXIBLE ROUTE NUMBER (RT) 1 – 255SECOND DIAL TONE (2nd DT) 0/1AUTHORIZATION CODE DIALING (AH) 0/1SUB ADDRESS DIALING (SUB) 0/1 NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking
CHAPTER 4 NDA-24288 Page 150 Revision 1.0 AGSP (g) Office Termination Code (SRV = UNIF) TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/HKIND OF SERVICE (SRV)SKIP DIGIT (SKIP) 0 – 5 NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking
NDA-24288 CHAPTER 4 Page 151 Revision 1.0 AGSP (h) Announcement Service-Single Announcement (SRV = ANNC) TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/HKIND OF SERVICE (SRV)ANNOUNCEMENT EQUIPMENT NUMBER (EQP) 1 – 127 NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking
CHAPTER 4 NDA-24288 Page 152 Revision 1.0 AGSP (i) Announcement Service-Multiple Announcement (SRV = ANNCM) TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/HKIND OF SERVICE (SRV)ANNOUNCEMENT TENANT NUMBER (TN) 1 – 125ANNOUNCEMENT EQUIPMENT NUMBER (EQP) 122 – 125 NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking
NDA-24288 CHAPTER 4 Page 153 Revision 1.0 AGSP (j) Paging Answer Code (SRV = PAGA) TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/HKIND OF SERVICE (SRV)ROUTE NUMBER (RT) NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking NNormal PA G A H Hooking
CHAPTER 4 NDA-24288 Page 154 Revision 1.0 AGSP (k) Paging Cancel Code (SRV = PAGC) TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/HKIND OF SERVICE (SRV)ROUTE NUMBER (RT) NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking NNormal PA G C H Hooking
NDA-24288 CHAPTER 4 Page 155 Revision 1.0 AGSPL AGSPL: Assignment of Guest Special Access Code for LDM 1. General This command determines the Kind of Service and the service Access Code to be executed in the Local Node (LN) on the Fusion Network. 2. Precautions 1. This command is used for the Hotel Application only. 2. If the Guest and Admin. Numbering are separated (the ASYD command, SYS1, INDEX 160, bit6 = 0), use this command for the Guest Special Access code. For the Admin. Special Access code, use the ASPAL command. Note:Hotel features are available in TN1 only. If the numbering plans are separated by tenants, the purpose for each tenant is completely separated. Admin. Station required of the guest room call must be allocated in TN1. 3. If the numbering plan for Admin. and Guest is common (the ASYD command, SYS1, INDEX 160, bit6=1), this command may be used to assign the Admin. Special Access code as well. 4. Access Code for Telephone numbers may be programmed by this command; however, those Telephone numbers are available in the self node only. Telephone numbers available on the Fusion network are to be programmed at Network Control Node (NCN) using the AGNPN and AGSPN commands.
CHAPTER 4 NDA-24288
Page 156
Revision 1.0
AGSPL
3. Data Entry Instructions
Access code (Max. 6 digits)TENANT
NUMBER
(TN)ACCESS CODE
(ACC)
MAX. 6 DIGITSCONNECTION
STATUS INDEX
(CI) N/H/BKIND OF
SERVICE
(SRV)
ACC
CISRV
SSCA=Service code appendix
OGCA=Outgoing call with route advance
LCR=Least cost routing N=Normal service
H=Hooking service
B=Busy serviceSSC=Service code
OGC=Outgoing call
UNIF=Office termination
ANNC=Announcement service-single announcement
ANNCM=Announcement service-multiple announcement
TELN=Telephone Number
Note: LCRS=Register sender LCR
Note
15 (Speed Calling-System;
Access) NND appears when the following SID is entered.
NND data is variable depending on SID.NND1 appears when SID=15. The number of ADC
(Abbreviation Digit Code) digits should be assigned in NND1.NND1
SERVICE INDEX
(SID) 1-63NECESSARY DIGIT
(NND)NECESSARY DIGIT FOR SPEED
CALLING (NND1) 1-24
NND
SID Number of digits for NNDAccess Code (1-24) When SRV=SSC (Service Code except SID2, 15,
19, 20, 36, 37, 38, 39, 56, 57 and 63) is assigned
Telephone Number is available in the self-node only.
2 (Dial Access to Attendant: Operator Call)
38 Priority Call 2 37 Priority Call 1
39 Priority Call 3 FPC appears when the following SID is entered.SERVICE INDEX
(SID) 1-63FUSION POINT CODE
(FPC)
FPC
SID Number of FPC1-253
19 OG Trunk Quing; Entry
20 OG Trunk Quing; Cancel1-253
1-253
1-253
1-253
1-253 When SRV= SSC (Service code), SID2, 19, 20, 37, 38 or 39 is assigned
NDA-24288 CHAPTER 4
Page 157
Revision 1.0
AGSPL
STATE
(Hotel Service Code)
1 To be cleaned without ID code
2 Cleaning Completed without ID code
3 Ready for Occupancy without ID code
4 Use Not Allowed without ID code
5-8 -
9 Maid Dial Answer Back without ID code-1
10 Maid Dial Answer Back without ID code-2
11 Maid Dial Answer Back without ID code-3
12 Maid Dial Answer Back without ID code-4
13 Maid Dial Answer Back without ID code-5
14 Maid Dial Answer Back without ID code-6
15 Maid Dial Answer Back without ID code-7
16 -
17 To be cleaned with ID code
18 Cleaning Completed with ID code
19 Ready for Occupancy with ID code
20 Use Not Allowed with ID code
21-24 -
25 Maid Dial Answer Back with ID code-1
26 Maid Dial Answer Back with ID code-2
27 Maid Dial Answer Back with ID code-3
28 Maid Dial Answer Back with ID code-4
29 Maid Dial Answer Back with ID code-5
30 Maid Dial Answer Back with ID code-6
31 Maid Dial Answer Back with ID code-7
32 Access Code for Administration Station Call
33 Automatic Wake Up Setting, Cancel; Same Special code
34 For Guest Station Secretary Telephone; Boss/Secretary Calling
35-43 -
44 Direct Data Entry-Station (via Guest Station)
45-50 -
51 Same Special Code Time Zone Connection Change
52 Same Special Code Time Zone Connection Change
53 Same Special Code Time Zone Connection Change
54 Same Special Code Time Zone Connection Change
55 Same Special Code Time Zone Connection Change
56-62 -
63 Dummy Number
Note: STATE=1-15 are used at the time of Maid ID Code Service is not provided;
(ASYD SYS1 INDEX 164, bit3=0)
STATE=17-31 are used at the time of Maid ID Code Service is provided;
(ASYD SYS1 INDEX 164, bit3=1)
SERVICE INDEX
(SID) 1-63 STATE
36 When SRV=SSC (Service code), SID36 (Hotel Service) is assigned
CHAPTER 4 NDA-24288
Page 158
Revision 1.0
AGSPL
SERVICE INDEX
(SID) 1-63 NO.1
56
NO.1
(Kind of Assignment Number)
Available numbers are 0-15.
This data is used to assign “Floor Service” data by the ASPF command.
Note: When programming “Floor Service” data,
ASYD SYS1 INDEX 165, bit7=1 must have been assigned.
SERVICE INDEX
(SID) 1-63NO.2KIND
57
NO.2
This parameter specifies the number (0-63) of the
access code being assigned for mutual Access.
This parameter serves as a counter for the access
codes being assigned.
Note: This parameter is used when assigning the
details of the service by the ASPS command.
KIND: (0-3)
This parameter specifies the Split Access Parameter Classification. The data to
be assigned here depends on how the Guest and Administration stations are
differentiated.
The Guest and Administration stations may be assigned to separate TNs, RSCs,
and/or SFCs, or they may only be differentiated by their respective designations
as Administration or Guest.
0: Administration/Guest
(Assign this if the access code is to be shared between Guest
and Administration with no correspondence to TN, RSC or SFC.)
1: TN
(Assign this if the access code is to be shared among specified TNs)
2: RSC
(Assign this if the access code is to be shared among specified RSCs)
3: SFC
(Assign this if the access code is to be shared among specified SFCs) When SRV=SSC (Service code) , SID56 (Floor Service) is assigned
When SRV=SSC (Service code), SID57 (Split Access) is assigned