NEC Neax 2400 Imx Hotel Office Data Specification
Have a look at the manual NEC Neax 2400 Imx Hotel Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24288 CHAPTER 4 Page 199 Revision 1.0 AGSPN (e) Least Cost Routing Access Code (SRV = LCR) TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/HKIND OF SERVICE (SRV)LOGICAL ROUTE NUMBER (LGRT) 1 – 255SECOND DIAL TONE (2nd DT) 0/1AUTHORIZATION CODE DIALING (AH) 0/1SUB ADDRESS DIALING (SUB) 0/1 NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking NNormal LCR H Hooking
CHAPTER 4 NDA-24288 Page 200 Revision 1.0 AGSPN (f) Register Sender Least Cost Routing Access Code (SRV = LCRS) TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/HKIND OF SERVICE (SRV)LOGICAL ROUTE NUMBER (LGRT) 1 – 255SECOND DIAL TONE (2nd DT) 0/1AUTHORIZATION CODE DIALING (AH) 0/1SUB ADDRESS DIALING (SUB) 0/1 NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking NNormal LCRS H Hooking
NDA-24288 CHAPTER 4 Page 201 Revision 1.0 AGSPN (g) Office Termination Code (SRV = UNIF) TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/HKIND OF SERVICE (SRV)SKIP DIGIT (SKIP) 0 – 5 NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking NNormal UNIF H Hooking
CHAPTER 4 NDA-24288 Page 202 Revision 1.0 AGSPN (h) Announcement Service-Single Announcement (SRV = ANNC) TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/HKIND OF SERVICE (SRV)ANNOUNCEMENT EQUIPMENT NUMBER (EQP) 1 – 127 NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking NNormal ANNC H Hooking
NDA-24288 CHAPTER 4 Page 203 Revision 1.0 AGSPN (i) Announcement Service-Multiple Announcement (SRV = ANNCM) TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/HKIND OF SERVICE (SRV)ANNOUNCEMENT TENANT NUMBER (TN) 1 – 125ANNOUNCEMENT EQUIPMENT NUMBER (EQP) 122 – 125 NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking NNormal ANNCM H Hooking
CHAPTER 4 NDA-24288 Page 204 Revision 1.0 AGSPN (j) Telephone Number (SRV = TELN) TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/HKIND OF SERVICE (SRV)NECESSARY DIGITS (NND) 1-16REMARKS NNormal TELN H Hooking NNormal TELN H Hooking NNormal TELN H Hooking NNormal TELN H Hooking NNormal TELN H Hooking NNormal TELN H Hooking NNormal TELN H Hooking NNormal TELN H Hooking NNormal TELN H Hooking NNormal TELN H Hooking NNormal TELN H Hooking NNormal TELN H Hooking NNormal TELN H Hooking NNormal TELN H Hooking
NDA-24288 CHAPTER 4
Page 205
Revision 1.0
ASPS
ASPS: Assignment of Special Access Code for Split Access
1. General
This command determines the Split Access data when an Access Code is assigned for this feature in either the
AASP or AGSP command (SRV=2, SID 57). This command is programmed when access codes for trunks and
features are to be shared between Guest and Administration stations.
2. Precautions
1. This command is used for the Hotel Application only.
2. If the Guest and Admin. Numbering are separated (the ASYD command, SYS1, INDEX 160, bit6 = 0),
this assignment is necessary for Guest Stations to call to the specific Admin. Stations.
Note:Guest stations should use Split Access Codes to call to Admin. Stations.Guest in the separate numbering
plan cannot access Admin. Stations by dialing their station numbers.
3. When data is to be deleted in this command, the data assigned for the access code in either the AASP or
AGSP command (SRV = 2, SID 57) must be deleted as well. Be sure to delete this command first.
4. For the parameter NO, enter the data assigned by the AASP or AGSP command.
5. Parameters KIND (in the AASP/AGSP command) and F specify the Split Access Parameter
Classification. The data to be assigned here depends on how the Guest and Administration stations are
differentiated.
Guest and Administration stations may be assigned to separate TNs, RSCs and/or SFCs, or they may only
be differentiated by their respective designations as Administration or Guest.
The relationship between KIND (AASP/AGSP) and F is as shown below:
(a) For KIND = 0 (Administration/Guest)
F = 0: Administration
1: Guest
2 - 15: Not used
(b) For KIND = 1 (Tenant)
F = 0: TN = 0
| |
15: TN = 15
(c) For KIND = 2 (RSC)
F = 0: RSC = 0
| |
15: RSC = 15
(d) For KIND = 3 (SFC)
F = 0: SFC = 0
| |
15: SFC = 15
6. The variable parameter appears on the MAT depending on the data in the parameter SRV.
CHAPTER 4 NDA-24288
Page 206
Revision 1.0
ASPS
3. Data Entry Instructions
D/N ASSIGN
NUMBER
(NO.) 0-63 DEVELOP
NUMBER (F)
0-15 KIND OF
SERVICE
(SRV)
SRV
STN = Station SSC = Service code
SSCA = Service code appendix OGC = Outgoing call
OGCA = Outgoing call with route advance
LCR = Least cost routing LCRS = Register sender LCR
UNIF = Office termination
ANNC = Announcement service-single announcement
ANNCM = Announcement service-multiple announcement
PAGA = Paging answer PAGC = Paging cancel
F
For “KIND = 0 (Administration/Guest)” For “KIND = 1 (Tenant)”
F = 0: Administration F = 0: TN=0
1: Guest | |
2-15: Not used 15: TN=15
For “KIND = 2 (RSC)” For “KIND= 3 (SFC)”
F = 0: RSC=0 F = 0: SFC=0
| | | |
15: RSC=15 15: SFC=15
NO.
D/N Enter NO. (0-63) assigned
in the AASP/AGSP
command
Designate Day or Night
D: Day Mode
N: Night Mode
DIGIT CODE (DC) 4 DIGITS FIX
DC
Enter the Digit Code.
When SRV = STN (Station)
NDA-24288 CHAPTER 4
Page 207
Revision 1.0
ASPS
15 (Speed Calling-System;
Access)
42 (Authorization Code/Forced
Account Code/Pad Lock) 41 (Account Code Dial)
60 (Attendant Manual Override)
63 (Call Park ; Retrieve) NND appears when the following SID is entered.
NND data is variable depending on SID.NND1 appears when SID=15. The number of ADC
(Abbreviation Digit Code) digits should be assigned in NND1.NND1
SERVICE INDEX
(SID) 1-63NECESSARY DIGIT
(NND)NECESSARY DIGIT FOR SPEED
CALLING (NND1) 1-24
NND
SIDNumber of digits for NNDAccess Code (1-24)
Access Code+Account code
(1-15)
Access Code+ID (1-15)
Access Code (1-5)
Access Code (1-3) When SRV=SSC (Service code except SID36 and
56) is assigned
CHAPTER 4 NDA-24288
Page 208
Revision 1.0
ASPS
STATE
(Hotel Service Code)
1 To be cleaned without ID code
2 Cleaning Completed without ID code
3 Ready for Occupancy without ID code
4 Use Not Allowed without ID code
5- 8 -
9 Maid Dial Answer Back without ID code-1
10 Maid Dial Answer Back without ID code-2
11 Maid Dial Answer Back without ID code-3
12 Maid Dial Answer Back without ID code-4
13 Maid Dial Answer Back without ID code-5
14 Maid Dial Answer Back without ID code-6
15 Maid Dial Answer Back without ID code-7
16 -
17 To be cleaned with ID code
18 Cleaning Completed with ID code
19 Ready for Occupancy with ID code
20 Use Not Allowed with ID code
21 - 24 -
25 Maid Dial Answer Back with ID code-1
26 Maid Dial Answer Back with ID code-2
27 Maid Dial Answer Back with ID code-3
28 Maid Dial Answer Back with ID code-4
29 Maid Dial Answer Back with ID code-5
30 Maid Dial Answer Back with ID code-6
31 Maid Dial Answer Back with ID code-7
32 -
33 Automatic Wake Up Setting, Cancel; Same Special code
34 For Guest Station Secretary Telephone; Boss/Secretary Calling
35 - 37 -
38 Automatic Wake-Up-Hotel Attendant Assistance Stop
39 Automatic Wake-Up-Hotel Attendant Assistance Stop Cancel
40 Alert Service Start (Hotel ATT)
41 Alert Service Stop (Hotel ATT)
42 Guest Service Telephone Screen Initialized
43 Guest Service Telephone Guest Room Information Retrieval
44 Direct Data Entry-Station (via Guest Station)
45 Alert Service Start (Special Admin. Station)
46 Alert Service Stop (Special Admin. Station)
47 -
48 2nd Wake-Up Call (Automatic) Set
49 2nd Wake-Up Call (Semi-Automatic) Set
50 2nd Wake-Up Call Cancel
51 Same Special Code Time Zone Connection Change
52 Same Special Code Time Zone Connection Change
53 Same Special Code Time Zone Connection Change
54 Same Special Code Time Zone Connection Change
55 Same Special Code Time Zone Connection Change
56 - 62 -
63 Dummy Number
Note: STATE=1-15 are used at the time of Maid ID Code Service is not provided;
(ASYD SYS1 INDEX 164, bit3=0)
STATE=17-31 are used at the time of Maid ID Code Service is provided;
(ASYD SYS1 INDEX 164, bit3=1)
SERVICE INDEX
(SID) 1-63
STATE
36 When SRV=SSC (Service code), SID36 (Hotel Service) is assigned