NEC Neax 2000 Ivs2 Wcs System Manual

							CHAPTER 3 SYSTEM DATA PROGRAMMING
WCS Feature Programming
NEAX2000 IVS2WCSSystemManual(PCS)
ND-70920 (E), Issue 1.0Page 73
DESCRIPTION DATA
Assign the access code of paging groups
for Group Call-Automatic Conference (6/
10-Par ty).
NOTE:Even if an extension does not
belong to the conference group,
the extension can page the
conference group, and can re-
participate in the conference if
thereisanidlecircuitonthe
Conference Trunk.
(1)
(2)Y=0-3 (Tenant Group No.)
X-XXXX: Access Code
A200 : Simultaneous Paging Group
0 for 6/10 Party
A207 : Simultaneous Paging Group
7 for 6/10 Party
A210 : Re-par ticipation Group 0
for 6 /1 0 Par ty
A217 : Re-par ticipation Group 7
for 6 /1 0 Par ty
AssignaGroupCall-Automatic
Conference (6/10-Par ty) key of each
paging group to the D
ter m, if required.
NOTE:Even if an extension does not
belong to the conference group,
the extension can page the
conference group, and can re-
participate in the conference if
thereisanidlecircuitonthe
Conference Trunk.
(1)
(2)YY=00
X-XXXXXXXX: My Line No. + + Key
No.
F0B00: Simultaneous Paging Group 0
fo r 6/10 Par ty
F0B07: Simultaneous Paging Group 7
fo r 6/10 Par ty
F0B10: Re-participation Group 0
fo r 6/10 Par ty
F0B17: Re-participation Group 7
fo r 6/10 Par ty
Specify the duration of simultaneous
paging.
(1)
(2)Y=0
95
01-99: 4-396 sec. in 4 sec. increments
If no data is set, the default setting is 32-36
seconds.
CM41
END
CM90
A
CM20
~ ~
~ ~
,
~ ~
~ ~ 
						

							NEAX2000 IVS2WCS System Manual (PCS)Page 74ND-70920 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
WCS Feature Programming
Group Call-2 Way Calling
Refer to the WCS Features and Specifications.
DESCRIPTION DATA
Assign the stations which belongs to each
paging group, and their number within the
group. A maximum of nine stations can be
paged simultaneously except the confer-
ence leader.
NOTE 1:Single line telephones, D
terms
and PSs can be assigned as the
station within the group.
A vir tual-line cannot be as-
signed.
NOTE 2:A station can belong to plural
group.
(1)
(2)YY=00-07: Simultaneous Paging Group
0-7
00-15: Serial No. within the Group
X-XXXXXXXX:Station No.
Assign a Service Restriction Class to each
station.
(1)
(2)YY=02
X-XXXXXXXX: Station No.
XX YY
XX: Service Restriction Class A
(00-15 )
Allow the Service Restriction Class A to
page the conference.
(1)
(2)YYY=119
00-15: Service Restriction Class A
assigned by CM12 YY=02
0:Allowed
Assign the access code of paging groups
for Group Call-2 Way Calling.
NOTE:Even if an extension does not
belong to the conference group,
the extension can page the
conference group.
(1)
(2)Y=0-3 (Tenant Group No.)
X-XXXX: Access Code
A220 : Simultaneous Paging Group 0
for Group Call-2 Way Calling
A227 : Simultaneous Paging Group 7
for Group Call-2 Way Calling
Assign a Group Call-2 Way Calling key of
each paging group to the D
term, if required.
NOTE:Even if an extension does not
belong to the conference group,
the extension can page the
conference group.
(1)
(2)YY=00
X-XXXXXXXX: My Line No. + + Key
No.
F0B20: Simultaneous Paging Group 0
for Group Call-2 Way Calling
F0B27: Simultaneous Paging Group 7
for Group Call-2 Way Calling
START
CM56
CM15
CM12
CM20
CM90
END
~ ~
,
~ ~ 
						

							CHAPTER 3 SYSTEM DATA PROGRAMMING
WCS Feature Programming
NEAX2000 IVS2WCSSystemManual(PCS)
ND-70920 (E), Issue 1.0Page 75
Multi-Line Operation-PS
Refer to the WCS Features and Specifications.
DESCRIPTION DATA
Assign a PS station number to the vi rtual
PS number.
(1)
(2)000-255: Virtual PS LEN
X-XXXXXXXX: Primary PS station No.
X-XXXXXXXX: Sub-line PS station No.
Assignthesub-linePSnumbertoeach
primary PS station, both are assigned by
CM1C.
(1)
(2)YY=01
X-XXXXXXXX: Primary PS station No.
X-XXXXXXXX: Sub-line PS station No.
Assign PS-ID of the sub-line PS as
“NONE”.
(1)
(2)YY=21
X-XXXXXXXX: Sub-line PS station No.
assinged by CM1C
NONE
Specify the terminal kind of the PS as
“D
termPS II”.
This data must be set to both the primary
PS station number and the sub-line PS
station number assigned by CM1C.
(1)
(2)YY=15
X-XXXXXXXX: Primary PS station No.
Sub-line PS station No.
00 : D
termPS II
Provide the multi-line function to the virtual
PS No. for the sub-line PS.
(1)
(2)YY=05
X-XXXXXXXX: Virtual PS No.
0 : Provided (Sub-line station)
Assign the virtual line/trunk data for the
sub line PS as same as the primary PS.
SeeVir tual Line/Trunk Data
Programming (For Integrated/Adjunct
CCIS) on Page 56andTrunk Data
Programming (For Adjunct Analog) on
Page 59
CM5A START
CM1C
A
CM1D
CM12
CM10
CM30
CM35 
						

							NEAX2000 IVS2WCS System Manual (PCS)Page 76ND-70920 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
WCS Feature Programming
To assign the PS station to the line key on the Dterm, assign the following data.
DESCRIPTION DATA
Assign a vir tual PS station number to the
key number of the D
term.
A vir tual PS number of PS sub-line can be
assigned to the key on the D
term.
(1)
(2)YY=00
Primary Extension No. + + Key No.
X-XXXXXXXX: Virtual PS Station No.
END
A
CM90
, 
						

							CHAPTER 3 SYSTEM DATA PROGRAMMING
WCS Feature Programming
NEAX2000 IVS2WCSSystemManual(PCS)
ND-70920 (E), Issue 1.0Page 77
Number Sharing
Refer to the WCS Features and Specifications.
DESCRIPTION DATA
Specify the combination of the main station
and the sub station, also the contrary
combination, as follows.
1st data : Main station (D
ter mMy Line)
2nd data: Sub station (PS)
1st data : Sub station (PS)
2nd data: Main station (D
ter mMy Line)
NOTE:As the main station number, D
term
My Line number must be
assigned.
As the sub station number,
following number must be
assigned.
Integrated type/Adjunct type
(CCIS):
Virtual PS number assigned by
CM10.
Adjunct type (Analog):
PS station number assigned by
CM30 YY=04.
(1)
(2)YY=19 (Assignment of main station
and sub station)
X-XXXXXXXX: Main station (D
termMy
Line) No./Sub station
(PS) No.
X-XXXXXXXX: Sub station (PS) No./
Main station (D
termMy
Line) No.
Assign the Class of Service to required sta-
tions.
NOTE:For the Trunk Restriction Class
(CM12 YY=01) and the Tenant
Number (CM12 YY=04), the same
data must be assigned to the sub
station and the main station.
(1)
(2)YY=02
X-XXXXXXXX (Station No.)
XX YY
XX: Service Restriction Class A (00-15)
To the sub station (PS), specify the number
which is informed to calling/called party,
SMDRandMCIasthemainstation
number.
(1)
(2)YYY=127
00-15: Service Restriction Class A of
main station
1 : Own station number is informed
(1)
(2)00-15: Service Restriction Class A of
sub station
0 : Main station number is informed
CM15 START
CM12
A 
						

							NEAX2000 IVS2WCS System Manual (PCS)Page 78ND-70920 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
WCS Feature Programming
DESCRIPTION DATA
Provide the capability of setting/cancelling
theNumberSharingfromthesubstation.
(1)
(2)YYY=128
00-15: Service Restriction Class A of
main station
1:Notprovide
(1)
(2)00-15: Service Restriction Class A of
sub station
0:Toprovide
Specify whether the sub station is
controlled as same as the main station, by
a Message Waiting lamp control signal
sent from the MCI.
NOTE:This assignment is effective only
when the system is an Integrated
type.
Do not assign CM15 YYY=129
for a sub station.
(1)
(2)YYY=129
00-15 : Service Restriction Class A of
main station
0 : Main station and sub station are
controlled.
1 : Only main station is controlled.
Provide the Number Sharing set/cancel
keys to the main station (D
ter m).
(1)
(2)YY=00
My Line No. + + Key No.
F0A94: Number Sharing Set/Cancel
Assign the Access Code for setting or
canceling Number Sharing from the sub
station (PS).
(1)
(2)Y=0-3 (Tenant Group Number)
X-XXXX: Access Code
A192 : Set Number Sharing from the
sub station
A193 : Cancel Number Sharing from
the sub station
END
CM15
A
CM20
CM90, 
						

							CHAPTER 3 SYSTEM DATA PROGRAMMING
WCS Feature Programming
NEAX2000 IVS2WCSSystemManual(PCS)
ND-70920 (E), Issue 1.0Page 79
Voice Mail Indication
Refer to the WCS Features and Specifications.
DESCRIPTION DATA
Provide PS stations with Message Waiting
service.
The first data should be the virtual PS
number.
(1)
(2)YY=03
X-XXXXXXXX: Virtual PS No.
0:Provided
(For the station with MW lamp)START
CM13
END 
						

							NEAX2000 IVS2WCS System Manual (PCS)Page 80ND-70920 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Multi-Site Roaming Programming
MULTI-SITE ROAMING PROGRAMMING
According to the following procedure, assign the system data for Roaming service.
PREPARATION
CONFIRMING NETWORK NUMBERING PLAN
(OPEN NUMBERING SYSTEM/
CLOSED NUMBERING SYSTEM)
START
NETWORK NUMBERING PLAN PROGRAMMING
(OPEN NUMBERING SYSTEM/
CLOSED NUMBERING SYSTEM)
Q931a DIGITAL TRUNK DATA PROGRAMMING
(FOR HOME PBX AND VISITOR PBX)
ROAMING PS DATA PROGRAMMING
(FOR HOME PBX AND VISITOR PBX)
HOME PS DATA PROGRAMMING
(FOR HOME PBX)
VISITOR PS DATA PROGRAMMING
(FOR VISITOR PBX)
END
Page 81
Page 82
Page 85
Page 85
Page 91
Page 93 
						

							CHAPTER 3 SYSTEM DATA PROGRAMMING
Multi-Site Roaming Programming
NEAX2000 IVS2WCSSystemManual(PCS)
ND-70920 (E), Issue 1.0Page 81
Confirming Network Numbering Plan
Confirm whether the network adopts Open Numbering System or Closed Numbering System for
the network numbering plan.
NOTE:The System data stored in the memory of the DBM (PN-AP00-A) card can be saved,
loaded, and verified from the MAT.
To save; Memory Area No. : A, Memory Address: 00900-10870
To load or verify; File Extension : DMA 
						

							NEAX2000 IVS2WCS System Manual (PCS)Page 82ND-70920 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Multi-Site Roaming Programming
Network Numbering Plan Programming
DESCRIPTION DATA
Assign an access code for LCR Group 0-3.
For Closed Numbering System, assign the
second data to A129 (LCR Group 3).
(1)
(2)Y=0-3 (Numbering Group 0-3)
X-XXXX: Access Code
A126: LCR Group 0
A127: LCR Group 1
A128: LCR Group 2
A129: LCR Group 3
Specify the number of digits and the first
digit for station number.
(1)
(2)Y=0-3 (Numbering Group 0-3)
X: First Digit of Station No.
801: 1 digit
802: 2 digits
803: 3 digits
804: 4 digits
805: 5 digits
Assign an Area Code Development
Pattern number. to each LCR Group.
For Closed Numbering System, assign the
firstdatato3.
(1)
(2)YYYY=A000
0-3: LCR Group 0-3
4000-4007: Area Code Development
Pa tt er n N o. 0 -7
Assign a Route Pattern number. to each
area code for the Area Code Development
Pattern number. assigned by CM8A
YYYY=A000.
(1)
(2)YYYY=4000-4007 (Area Code Devel-
opment Pattern No. 0-7)
XX...XX (Area Code, Max. 8 digits)
0000-0255: Route Pattern No.
Assign an area code including LCR
access code assigned by CM20>A129.
(1)
(2)YYYY=4000-4007 (Area Code Devel-
opment Pattern No. 0-7)
X-XXXXXXXX (Area Code, 8 digits)
8000 (Intra-Office Termination)
8001 (1-digit intra-office station)
8002 (2-digit intra-office station)
8003 (3-digit intra-office station)
8004 (4-digit intra-office station)
8005 (5-digit intra-office station)
8006 (6-digit intra-office station)
8007 (7-digit intra-office station)
8008 (8-digit intra-office station)START
CM20
CM8A
A