Minolta Di450 User Manual

							3-38
6. Selecting the Original Copy Type
Making Copies
Chapter 3
Selecting the Original Copy Type
Load the originals.
Select the original type.
Select the desired copy type.

 Touch [4in1/Booklet]. Select the desired copy type and touch
[Enter].
[Original Direction] key
Use this key when you want to place your original
in a direction other than the standard.
Touch [Original Direction].
Select the position of the original.
To u c h [ E n t e r ] .
Using Single-Sided or Double-Sided
Originals


1
2
4003P002CA
3
4003P049CA
4003P050CA
4003P051CA
1
4003P052CA
2
4003P053CA
3


Downloaded From ManualsPrinter.com Manuals 
						

							3-39
6. Selecting the Original Copy Type
Making Copies
Chapter 3
[Margin] key for the original:
When youre going to make copies using Single-
Sided Double-Sided or Double-Sided Single-
Sided, first check to see if your original has a file
margin in it. The machine can correct the margin
position to make good copies as long as you
instruct it properly.
Touch [Margin].
Select the desired margin position.
You have a choice of the following two
Margin Positions.Hold down [

]or[
] until the desired
margin width is reached.
Useful Tip
You can change the margin width in 1/16
increments within the range 0 to 3/4.
To u c h [ E n t e r ] .
Useful Tips
 If the margin position is set to Left and width to
0, the image on both the front and back sides of
the copy has the same orientation as that on the
original.
 If the margin position is set to Top and width to
0,theimageonthe2ndsideofthecopyis
inverted to that on the 1st side.
Its not necessary to correct the margin position
and width if your original has no file margin.
If your original has a file margin




1155O735AA
Original with a File Margin Original with no File Margin
1
4003P054CA
2
1155O636AA
 Margin Position (Left)
Orig. Copy
1155O635AA
 Margin Position (Top)
Orig. CopyIf your original has no file margin
3
4003P355EA
4
4002O013AB
Orig. Copy
4002O048AB
Orig. Copy


Downloaded From ManualsPrinter.com Manuals 
						

							3-40
6. Selecting the Original Copy Type
Making Copies
Chapter 3
Place the original.
Touch [Book].
Touch [Standard Book] or [Right Bound].
Touch [Separation] or [Spread].If you want to erase the four edges or center,
touch [Book Erase].
Useful Tip
You have a choice of the following three types of
erase:
Using a Book as original
1
2
4003P056CA
3
4003P057CA
4
4003P058CA
5
4003P059CA
 Frame + Center Erase
Erase a given width along the four edges
and down the center.
1149O057AA
FrameErase
Erase a given width along the four
edges.
1149O055AA
CenterErase
Erase a given width down the center.
1149O058AA


Downloaded From ManualsPrinter.com Manuals 
						

							3-41
6. Selecting the Original Copy Type
Making Copies
Chapter 3
Select the particular erase function from
among the three options available.
Hold down [

]or[
] until the desired erase
width is reached. Then, touch [Enter].
NOTES
 You can change the frame erase width in 1/16
increments within the range 1/4 to 3/4.
 The center erase width has been set to 1/2.
Touch [Enter].
Touch [Single-Sided] or [Double-Sided]
under Copy.
NOTE
When Book is used to make copies from, none of
2in1, 4in1, and Booklet is valid.
 Touch [Page arrange.].
You have a choice of the following two
arrangement types.
 Select the desired page arrangement.
 Touch [Enter].
6
4003P360EA
7
4003P361EA
8
9
4003P056CA
4003P065CA
4002O031AC
BookOrder
4002O030AB
Standard
4003P066CB


Downloaded From ManualsPrinter.com Manuals 
						

							3-42
6. Selecting the Original Copy Type
Making Copies
Chapter 3
Some Precautions for Making Copies
 Place the open book so that its top edge is at the rear of the machine and the center of the book is
aligned with the Book Marker indicated on the Original Length Scale.
 Make copies in descending order of page.
 Select the desired zoom ratio and paper size.
 When 2in1, 4in1, or Booklet function is selected, the machine automatically selects a default zoom
ratio. You can, however, choose another zoom ratio by changing the User’s Choice setting.
p.5-14
 User’s Choice also allows you to program a specific page order for 4in1.
p.5-15
 If an original is placed directly on the Original Glass in 2-Sided, 2in1, 4in1, or Booklet, Separate Scan
is automatically set.
p.3-67
 Separate Scan is not set, however, if the following settings have been made: Book - Spread - 2-Sided
Copy - Page Arrangement - Standard.
Precautions for Book Copying
Placing the Book on the Glass Correctly
Book Marker Original Length
Scale
1155O697AA 4002O130AC
Precautions for 2in1, 4in1 and Booklet Copying
Precautions for Copying through Original Glass


Downloaded From ManualsPrinter.com Manuals 
						

							3-43
6. Selecting the Original Copy Type
Making Copies
Chapter 3
Handy Feature Available from Initial Mode Setting
The initial setting for the original copy type is 1-Sided 1-Sided. If this setting is changed to 1-
Sided 2-Sided or 2-Sided 2-Sided, the Basic screen shows a [1-Sided 1-Sided] key.
Useful Tip
User’s Choice can be used to change the settings of initial mode.p. 5-12



 





4003P067CA
Touch this key to simply set the 1-Sided 1-
Sided mode.


Downloaded From ManualsPrinter.com Manuals 
						

							3-44
Making Copies
Chapter 3
7. Selecting the Density
Image Density
When you touch [Density] on the Touch Panel, a screen appears that allows you to set the exposure level
for the image density.
Density offers a choice of [Text], [Text/Photo], or [Photo]. Select one according to your needs.
Useful Tips
 Touching [Auto] automatically selects [Text].
 The machine has been factory-set to automatically select the Auto Exposure mode. User’s Choice can
be used to change this default setting to the Manual Exposure mode.p.5-14
Text emphasizes outlines to produce clear-cut text
as it appears on the copy.

When in the Auto Exposure mode, the machine
automatically adjusts the exposure level for the
optimum copy image density.
To u c h [ Te x t ] .
To u c h [ A u t o ] .
[Auto] is highlighted, indicating that the
machine is set into the Auto Exposure mode.
Useful Tip
The exposure level in the Auto Exposure mode
can be made either “Darker” or “Lighter” by
using User’s Choice.p.5-14
In the Manual Exposure mode, you can vary the
exposure level in nine steps.
Touch [Text].
Touch [Lighter] or [Darker] as necessary.
Useful Tips
 To make the image darker, touch [Darker].
 To make the image lighter, touch [Lighter].
4003P003CA
Te x t
1
2
4003P003CA
1
2
4003P068CA
Downloaded From ManualsPrinter.com Manuals 
						

							3-45
7. Selecting the Density
Making Copies
Chapter 3
Select Text/Photo when you make copies from an
original that contains both text and photos.
Touch [Text/Photo].
[Text/Photo] is highlighted, indicating that
the machine is set into the Text/Photo mode.
Touch [Lighter] or [Darker] as necessary.
NOTE
In the Text/Photo mode, the machine defies
automatic adjustments of the exposure level. Be
sure to manually adjust the exposure level as
necessary before making the copy.
Useful Tips
 To make the image darker, touch [Darker].
 To make the image lighter, touch [Lighter].The machine can make a faithful reproduction of
an original having a halftone image such as
photos.
Touch [Photo].
[Photo] is highlighted, indicating that the
machine is set into the Photo mode.
Touch [Lighter] or [Darker] as necessary.
NOTE
In the Photo mode, the machine defies automatic
adjustments of the exposure level. Be sure to
manually adjust the exposure level as necessary
before making the copy.
Useful Tips
 To make the image darker, touch [Darker].
 To make the image lighter, touch [Lighter].
Te x t / P h o t o
1
4003P069CA
2
4003P070CA
Photo
1
4003P071CA
2
4003P072CA
Downloaded From ManualsPrinter.com Manuals 
						

							3-46
Making Copies
Chapter 3
8. Auxiliary Functions
When [Auxiliary] on the Touch Panel is touched, the Auxiliary function menu screen appears allowing
you to set the various auxiliary functions.
Cover
The Cover mode lets you make a front cover or a front and back cover for a copy set by copying the first
page or the first and last page of an original set on different paper from the normal paper, such as color
paper.
There are six different Cover functions available. Select the appropriate one according to your need.
Functions
4003P001CA4003P004CA
Front Cover: Copied
Back Cover: None
4002O032AA
Front Cover: Blank
Back Cover: None
4002O033AA
4002O034AA
Front Cover: Copied
Back Cover: BlankFront Cover: Blank
Back Cover: Blank
4002O035AA
4002O036AA
Front Cover: Copied
Back Cover: CopiedFront Cover: Blank
Back Cover: Copied
4002O037AA
Downloaded From ManualsPrinter.com Manuals 
						

							3-47
8. Auxiliary Functions
Making Copies
Chapter 3
Load the originals.
NOTE
If you place your original directly on the
Original Glass, you need to set Separate
Scan.
p.3-67
Touch [Cover].
Select the key for the front cover.Select the key for the back cover.
Load the paper for the cover (e.g., color
paper) into the drawer.
Useful Tip
You can use the Multi Bypass Tray as the paper
source of the cover paper. The tray, however,
accepts the following paper size only: X, 7-1/4 to
17 and Y, 5-1/2 to 11-3/4.
Touch the key for Cover Paper.
Using the Cover Mode
1
4002O149AC
2
4003P073CA
3
4003P374EA
4
4003P375EA
5
4002O146AB
6
4003P376EA
Downloaded From ManualsPrinter.com Manuals