Minolta Di450 User Manual
Have a look at the manual Minolta Di450 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 7 Minolta manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
3-13
3. Selecting the Paper
Making Copies
Chapter 3
Touching [Custom Size] on the screen given in
step 4 opens the following screen.
NOTE
The Exclusive Paper mode is automatically
selected when a length in the range of 5-3/4 to 7-
3/16 is entered for X and a width in the range of
4 to 15-7/16 is entered for Y using Custom Size.
Touch[]or[] to set the whole number for X
and touch [X]. The underline moves to the
fractional part. Set the fraction with []or[].
Now the value for X has been fixed.
Do...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-55.png "Page 56
3-13
3. Selecting the Paper
Making Copies
Chapter 3
Touching [Custom Size] on the screen given in
step 4 opens the following screen.
NOTE
The Exclusive Paper mode is automatically
selected when a length in the range of 5-3/4 to 7-
3/16 is entered for X and a width in the range of
4 to 15-7/16 is entered for Y using Custom Size.
Touch[]or[] to set the whole number for X
and touch [X]. The underline moves to the
fractional part. Set the fraction with []or[].
Now the value for X has been fixed.
Do...")
![Page 57
3-14
Making Copies
Chapter 3
4. Selecting the Zoom
Zoom Ratio
When you touch [Zoom] after touching [Basics] on the Touch Panel, a screen appears that allows you to
set the zoom ratio. You have six different ways to choose from to set the zoom ratio. Select one according
to your need.
In the Auto Size mode, the machine automatically
selects the optimum zoom ratio according to the
size of the original being used and the paper size
selected for use.
Touch [Auto Size] to set the machine into the
Auto Size...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-56.png "Page 57
3-14
Making Copies
Chapter 3
4. Selecting the Zoom
Zoom Ratio
When you touch [Zoom] after touching [Basics] on the Touch Panel, a screen appears that allows you to
set the zoom ratio. You have six different ways to choose from to set the zoom ratio. Select one according
to your need.
In the Auto Size mode, the machine automatically
selects the optimum zoom ratio according to the
size of the original being used and the paper size
selected for use.
Touch [Auto Size] to set the machine into the
Auto Size...")
![Page 58
3-15
4. Selecting the Zoom
Making Copies
Chapter 3
This function lets you make a copy slightly
reduced in image size from that of the original.
Touch [Minimal] and set the zoom ratio.
Useful Tips
Avalueof×0.930 has been factory-
programmed in [Minimal], but that ratio can
be changed as necessary.
3-18
It comes in handy for making a copy, without
losing any portion of the original image, from
an original which has an image area covering
its entire surface.Touching []or[] changes the zoom ratio in...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-57.png "Page 58
3-15
4. Selecting the Zoom
Making Copies
Chapter 3
This function lets you make a copy slightly
reduced in image size from that of the original.
Touch [Minimal] and set the zoom ratio.
Useful Tips
Avalueof×0.930 has been factory-
programmed in [Minimal], but that ratio can
be changed as necessary.
3-18
It comes in handy for making a copy, without
losing any portion of the original image, from
an original which has an image area covering
its entire surface.Touching []or[] changes the zoom ratio in...")
![Page 59
3-16
4. Selecting the Zoom
Making Copies
Chapter 3
You may use the 10-Key Pad to directly enter the
zoom ratio.
Touch [Custom Zoom].
Enter the zoom ratio from the 10-Key Pad.
Useful Tips
Example:×1.300
Press 1, 3, 0, and 0, in that order, from the 10-
Key Pad.
To correct a ratio, press the Clear key and then
enter the correct one again.
The zoom ratio can be set in the range
×0.250
to
×4.000 when the copy is made through the
Original Glass and
×0.250 to×2.000 when the
Electronic Document Handler is...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-58.png "Page 59
3-16
4. Selecting the Zoom
Making Copies
Chapter 3
You may use the 10-Key Pad to directly enter the
zoom ratio.
Touch [Custom Zoom].
Enter the zoom ratio from the 10-Key Pad.
Useful Tips
Example:×1.300
Press 1, 3, 0, and 0, in that order, from the 10-
Key Pad.
To correct a ratio, press the Clear key and then
enter the correct one again.
The zoom ratio can be set in the range
×0.250
to
×4.000 when the copy is made through the
Original Glass and
×0.250 to×2.000 when the
Electronic Document Handler is...")
![Page 60
3-17
4. Selecting the Zoom
Making Copies
Chapter 3
You can store some of the most frequently used
zoom ratios in memory and recall them later as
necessary.
Touch [Custom Zoom].
From among the two ratios previously stored
in memory and [Minimal], select the desired
one.
Useful Tip
Its a good idea for you to store frequently used
zoom ratios in memory.p.3-18
Touch [Enter].
Touch [Custom Zoom].
Touch [X/Y Zoom].
From among the three ratios previously
stored in memory, select the desired one.
Useful Tip...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-59.png "Page 60
3-17
4. Selecting the Zoom
Making Copies
Chapter 3
You can store some of the most frequently used
zoom ratios in memory and recall them later as
necessary.
Touch [Custom Zoom].
From among the two ratios previously stored
in memory and [Minimal], select the desired
one.
Useful Tip
Its a good idea for you to store frequently used
zoom ratios in memory.p.3-18
Touch [Enter].
Touch [Custom Zoom].
Touch [X/Y Zoom].
From among the three ratios previously
stored in memory, select the desired one.
Useful Tip...")
![Page 61
3-18
4. Selecting the Zoom
Making Copies
Chapter 3
Touch [Custom Zoom].
Touch [Input].
Enter the zoom ratio from the 10-Key Pad.
Useful Tips
Example:×1.300
Press 1, 3, 0, and 0, in that order, from the 10-
Key Pad.
To correct a ratio, press the Clear key and then
enter the correct one again.
The zoom ratio can be set in the range
×0.250
to
×4.000 when the copy is made through the
Original Glass and
×0.250 to×2.000 when the
Electronic Document Handler is used.
Touch memory location key [1] or [2],...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-60.png "Page 61
3-18
4. Selecting the Zoom
Making Copies
Chapter 3
Touch [Custom Zoom].
Touch [Input].
Enter the zoom ratio from the 10-Key Pad.
Useful Tips
Example:×1.300
Press 1, 3, 0, and 0, in that order, from the 10-
Key Pad.
To correct a ratio, press the Clear key and then
enter the correct one again.
The zoom ratio can be set in the range
×0.250
to
×4.000 when the copy is made through the
Original Glass and
×0.250 to×2.000 when the
Electronic Document Handler is used.
Touch memory location key [1] or [2],...")
![Page 62
3-19
4. Selecting the Zoom
Making Copies
Chapter 3
Touch [Custom Zoom].
Touch [X/Y Zoom].
Touch [Input].Touch [X] or [Y] to enter the desired zoom
ratio from the 10-Key Pad.
Touch memory location key [1], [2] or [3] in
whichtostorethesetzoomratio.
* When the key is touched, the ratio is shown
on the key, indicating that it has been stored in
memory.
NOTES
When a new ratio is stored, the old one is
erased.
When the Hard Disk Drive Kit is mounted and
“100 Accounts” is selected for “Copy Track”
of...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-61.png "Page 62
3-19
4. Selecting the Zoom
Making Copies
Chapter 3
Touch [Custom Zoom].
Touch [X/Y Zoom].
Touch [Input].Touch [X] or [Y] to enter the desired zoom
ratio from the 10-Key Pad.
Touch memory location key [1], [2] or [3] in
whichtostorethesetzoomratio.
* When the key is touched, the ratio is shown
on the key, indicating that it has been stored in
memory.
NOTES
When a new ratio is stored, the old one is
erased.
When the Hard Disk Drive Kit is mounted and
“100 Accounts” is selected for “Copy Track”
of...")
![Page 63
3-20
Making Copies
Chapter 3
5. Selecting the Finishing
When you touch [Finishing] after touching [Basics] on the Touch Panel, a screen appears that allows you
to set a particular finishing function.
Finishing Functions
4003P541EA
4002O055AA
Non-Sort
All copies are fed out without being sorted,
grouped, stapled or punched.
Touch [Non-Sort].
NOTE
Thick paper and OHP transparencies cannot be
used for making copies in Staple, Punch and/or
Folding.
Orig.
Copy
4002O056AA
Sort
This function is effective...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-62.png "Page 63
3-20
Making Copies
Chapter 3
5. Selecting the Finishing
When you touch [Finishing] after touching [Basics] on the Touch Panel, a screen appears that allows you
to set a particular finishing function.
Finishing Functions
4003P541EA
4002O055AA
Non-Sort
All copies are fed out without being sorted,
grouped, stapled or punched.
Touch [Non-Sort].
NOTE
Thick paper and OHP transparencies cannot be
used for making copies in Staple, Punch and/or
Folding.
Orig.
Copy
4002O056AA
Sort
This function is effective...")
![Page 66
3-23
5. Selecting the Finishing
Making Copies
Chapter 3
Touch the desired finishing function key and
then touch [Hole Punch].
NOTES
Papersize
Fi n i s h e r FN - 5 :1 1
×17L to Letter
Finisher FN-105 :11
×17L to Letter
Mailbin Finisher :11
×17L to Letter
Hole Punch is not possible in the Interrupt
mode.
When making copies in the Hole Punch mode,
make sure to load the originals into the
Electronic Document Handler or place the
Originals on the original Glass in the correct
direction.
p.3-33
...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-65.png "Page 66
3-23
5. Selecting the Finishing
Making Copies
Chapter 3
Touch the desired finishing function key and
then touch [Hole Punch].
NOTES
Papersize
Fi n i s h e r FN - 5 :1 1
×17L to Letter
Finisher FN-105 :11
×17L to Letter
Mailbin Finisher :11
×17L to Letter
Hole Punch is not possible in the Interrupt
mode.
When making copies in the Hole Punch mode,
make sure to load the originals into the
Electronic Document Handler or place the
Originals on the original Glass in the correct
direction.
p.3-33
...")
3-18 4. Selecting the Zoom Making Copies Chapter 3 Touch [Custom Zoom]. Touch [Input]. Enter the zoom ratio from the 10-Key Pad. Useful Tips Example:×1.300 Press 1, 3, 0, and 0, in that order, from the 10- Key Pad. To correct a ratio, press the Clear key and then enter the correct one again. The zoom ratio can be set in the range ×0.250 to ×4.000 when the copy is made through the Original Glass and ×0.250 to×2.000 when the Electronic Document Handler is used. Touch memory location key [1] or [2], or [Minimal], whichever is desired. * When the key is touched, the ratio is shown on the key, indicating that it has been stored in memory, except for [Minimal]. NOTES When a new ratio is stored, the old one is erased. The [Minimal] ratio can range between ×0.900 and ×0.999. When the Hard Disk Drive Kit is mounted and “100 Accounts” is selected for “Copy Track” of “Administrator Mode” available from Utility Mode, zoom ratios can be stored in memory for each account. To u c h [ E n t e r ] . Storing a Ratio in Memory 1 4003P320EA 2 4003P025CA 3 123 456 789 0C 1139O4870A 1149O160BA 4 4003P026CA 5 Downloaded From ManualsPrinter.com Manuals
3-19 4. Selecting the Zoom Making Copies Chapter 3 Touch [Custom Zoom]. Touch [X/Y Zoom]. Touch [Input].Touch [X] or [Y] to enter the desired zoom ratio from the 10-Key Pad. Touch memory location key [1], [2] or [3] in whichtostorethesetzoomratio. * When the key is touched, the ratio is shown on the key, indicating that it has been stored in memory. NOTES When a new ratio is stored, the old one is erased. When the Hard Disk Drive Kit is mounted and “100 Accounts” is selected for “Copy Track” of “Administrator Mode” available from Utility Mode, zoom ratios can be stored in memory for each account. To u c h [ E n t e r ] . 1 4003P320EA 2 4003P321EA 3 4003P327EA 4 4003P328EA 5 4003P329EA 6 Downloaded From ManualsPrinter.com Manuals
3-20 Making Copies Chapter 3 5. Selecting the Finishing When you touch [Finishing] after touching [Basics] on the Touch Panel, a screen appears that allows you to set a particular finishing function. Finishing Functions 4003P541EA 4002O055AA Non-Sort All copies are fed out without being sorted, grouped, stapled or punched. Touch [Non-Sort]. NOTE Thick paper and OHP transparencies cannot be used for making copies in Staple, Punch and/or Folding. Orig. Copy 4002O056AA Sort This function is effective when making multiple copies from multiple originals. Copies are sorted into complete sets of the originals. Touch[Sort]. Orig.Copy 4002O057AA Group The copies made from each original are separated into groups. Each group contains the same number of copies. Touch [Group]. Orig.Copy Downloaded From ManualsPrinter.com Manuals
3-21 5. Selecting the Finishing Making Copies Chapter 3 Useful Tip The machine has been factory-set to automatically switch between Sort and Non-Sort depending on the number of originals and the number of copies to be made when the Electronic Document Handler is used. It has also been set to automatically select Non-Sort in the initial mode. These default settings can still be changed by using User’s Choice.p.5-14 4002O058AA Staple This function is effective when making multiple copies from multiple originals. Copies are sorted or grouped into complete sets of the originals and then stapled. A copy set which has been sorted can later be stapled together.p.3-26 (Only when the Finisher FN-5 is mounted) Touch [Staple]. Orig.Copy 4002O285EA Hole Punch Holes are punched in the copy sets or stacks for filing. It can be combined with Non-Sort, Sort, Group or Staple. Touch [Hole Punch]. NOTES Finisher FN-5/Finisher FN-105 The number of holes to be punched can be selected from among two and three. Mailbin Finisher The number of holes to be punched is three, but “two” is optionally available. The number of holes to be punched is two. Orig.Copy 4002O060AA Folding This function allows you to fold copies. Touch [Fold]. You have a choice of folding options, either Crease, Half-Fold, or Z-fold.p.3-28 Orig. Copy Downloaded From ManualsPrinter.com Manuals
3-22 5. Selecting the Finishing Making Copies Chapter 3 Selecting the Finishing Function Touch the desired finishing function key. NOTES When either the Finisher FN-105, Finisher FN- 106, or Mailbin Finisher is mounted, copies are fed out in a sawtooth manner in Sort or Group mode. When the Finisher FN-5 is mounted, or when neither a Finisher nor a Mailbin Finisher is mounted, copies are fed out in a crisscross manner in Sort or Group mode. Crisscross sorting is possible only when all of the following conditions are met: Crisscross Mode of User’s Choice is turned “ON.” The machine is loaded with paper of the same size, but in two different directions. OHP, Card/Vellum, or a small size is not set if the Multi Bypass Tray is used. p.3-11 Mixed Original Detection is turned OFF. None of the Staple, Hole Punch, Folding, Page Insertion, and Cover functions are set. Useful Tips If Crisscross is set to “ON” in User’s Choice, sorted copy sets will be stacked in a crisscross manner, one set stacked lengthwise on top of another set stacked crosswise. Otherwise, if Crisscross is set to “OFF,” the sorted copy sets will be stacked together in the same direction. The default setting for Crisscross is “ON.” This can be changed to “OFF” in User’s Choice. p.5-14 Useful Tips Shift Sorting The sorted copy sets are stacked in the same direction, but in a sawtooth manner by shifting the tray to the front or rear for each set. Crisscross Sorting Thesortedcopysetsarestackedinacrisscross manner, one set stacked lengthwise on top of another set stacked crosswise. Shift Grouping The sorted copy stacks are stacked in the same direction, but in a sawtooth manner by shifting the tray to the front or rear for each stack. CrisscrossGrouping The sorted copy stacks are stacked in a crisscross manner, one stack stacked lengthwise on top of another stack stacked crosswise. Sort/Group 1 4003P330EA4002O061AB 4002O062AB 4002O063AB 4002O064AB Downloaded From ManualsPrinter.com Manuals
3-23 5. Selecting the Finishing Making Copies Chapter 3 Touch the desired finishing function key and then touch [Hole Punch]. NOTES Papersize Fi n i s h e r FN - 5 :1 1 ×17L to Letter Finisher FN-105 :11 ×17L to Letter Mailbin Finisher :11 ×17L to Letter Hole Punch is not possible in the Interrupt mode. When making copies in the Hole Punch mode, make sure to load the originals into the Electronic Document Handler or place the Originals on the original Glass in the correct direction. p.3-33 The number of punch holes can be changed between “2-Hole” and “3-Hole” by using the Knob located inside the Finisher. * When changing the setting for the number of holes to be made, be sure the marks are aligned. . Pull out Knob: 2-Hole Push in Knob: 3-Hole * The number of punch holes can be graphically identified on the Touch Panel. Useful Tips If you do not select a hole-punching position, the machine automatically sets the Hole Punch position according to the original feeding direction as illustrated below. When making copies from either the 11 ×17L or Legal L size, the machine automatically specifies the hole punching position as shown below. Hole Punch 1 4003P331EA 4003P031DA Knob 4002O295EA Orig.Copy 1155O789EA Orig. Copy 1155O790EA 1155O791EA Orig.Copy Downloaded From ManualsPrinter.com Manuals
3-24 5. Selecting the Finishing Making Copies Chapter 3 [Select Position] key: Use this key when you want to place your original in a direction other than the standard or make punch holes in positions other than those made automatically. Touch [Select Position]. Touch the desired hole-punching position. To u c h [ E n t e r ] . Touch the desired finishing function key. Touch the stapling key of your choice. You have a choice of the following two stapling types. * When you touch a stapling key in the Non- Sort mode, the finisher is automatically set into the Sort mode. 1 4003P332EA 2 4003P333EA 3 Staple 1 4003P330EA 2 4003P334EA Corner Staple A Paper size : 11×17L to Letter Number of sheets : 2 to 50 4002O067AA 2-PointStaple Paper size : 11×17L to Letter Number of sheets : 2 to 50 4002O068AA A (Only when the Finisher FN-5 is mounted) Paper size : 11×17L, LetterL (For United States and Canada Users) :11×17L to LetterL (Except United States and Canada Users) Number of sheets : 2 to 15 4002O069AA AB Downloaded From ManualsPrinter.com Manuals
3-25 5. Selecting the Finishing Making Copies Chapter 3 Touch [Select Position]. NOTE The stapling position cannot be specified if Corner Staple is selected. It can, however, be specified if Corner Staple is combined with Hole Punch. Touch the desired stapling position on the Touch Panel. Touch [Enter]. NOTES Stapling is not possible in the Interrupt mode. Note the correct direction of the originals when making copies in the Sort Staple mode. p.3-32 Note the position at which the copy set or stack is stapled together in the Staple mode. p. 4-22 If an original is placed directly on the Original Glass in a Staple mode, Separate Scan is automatically set.p.3-67 Touch the desired finishing function key. Touch [Corner Staple]. NOTES When [Corner Staple] is touched with Non-Sort selected, the Finisher is automatically set into the Sort mode. Stapling is not possible in the Interrupt mode. Stapling position cannot be specified if the machine is equipped with a Finisher FN-106 or Mailbin Finisher. When the Mailbin Finisher is mounted, however, you can select the stapling position only if Hole Punch is combined with Staple. Note the correct direction of the originals when making copies in the Sort Staple mode. p.3-32 If an original is placed directly on the Original Glass in a Staple mode, Separate Scan is automatically set.p.3-67 Useful Tip Paper size : 11×17L to Letter Number of sheets to be stapled : Mailbin Finisher: 2 to 50 Finisher FN-106: 2 to 30 3 4003P335EA 4 4003P036CA 51 4003P037CA 2 4003P038CA Downloaded From ManualsPrinter.com Manuals
3-26 5. Selecting the Finishing Making Copies Chapter 3 Open Staple Tray Cover [FN10]. Align the sheets of paper neatly. Insert a neat stack of paper face down into the Staple Tray. NOTES Make sure of the stapling position and press the paper stack against the end bracket. Up to 50 sheets of plain paper can be stapled.Slide the Paper Guide Plate to the size of the paper. NOTE Make sure that the Paper Guide Plates are in touch with the edge of the paper stack. CloseStapleTrayCover[FN10]. After you hear the sound of mechanism stops, select the desired stapling type on the Finisher Panel. Manual Staple 1 1155O033AA 2 1134O039AA 3 1155O036AB 4 1155O034AA 5 1155O035AA 6 1155O037AA Downloaded From ManualsPrinter.com Manuals
3-27 5. Selecting the Finishing Making Copies Chapter 3 You have a choice of the following three stapling positions. Press the key. This staples the copy stack or set. Useful Tip This feature is useful for stapling originals after making copies. Open Staple Tray Cover [FN10] and remove the stapled paper stack. Close Staple Tray Cover [FN10]. Paper size : 11×17L to Letter Number of sheets : 2 to 50 4002O094AA 4002O095AA Paper size : 11×17L to Letter Number of sheets : 2 to 50 4002O096AA Paper size : 11 ×17L to Letter Number of sheets : 2 to 50 7 1155O038AA 8 1155O760AA 9 Downloaded From ManualsPrinter.com Manuals