Minolta Di450 User Manual

							4-26
6. Stapled Position
Typical Function Combinations
Chapter 4
Downloaded From ManualsPrinter.com Manuals 
						

							5-1
Using the Utility Mode
Chapter 5
Chapter 5
Using the Utility Mode
Downloaded From ManualsPrinter.com Manuals 
						

							5-2
Using the Utility Mode
Chapter 5
1. Job Memory Input and Job Recall
Job Memory Input
Up to 10 different, frequently used copy job programs can be stored in memory and recalled later as
necessary. When the machine is equipped with an optional Hard Disk Drive Kit and if “100 Accounts” is
selected for “Copy Track” of “Administrator Mode” available from Utility Mode, up to 10 different jobs
can be stored in memory for each account.
Set up the job you want to store in memory.
Press the Utility key.
Touch [Job/Image/Scan Input].
Touch[JobMemoryInput].Touch [Input] and then select any one of the
10 job number keys from [1] to [10] marked
with .
NOTE
A job number key not marked with
indicates that a job has already been stored
under that number. If you store a new job in that
number key, the old job is erased.
To check for the details of the job stored,
touch [Check] and then touch the job number
key.
Storing a Job
1
2
4002O282CA
3
4003P142CA
4
4003P143CA
5
4003P144CB
6
4003P145CB
Downloaded From ManualsPrinter.com Manuals 
						

							5-3
1. Job Memory Input and Job Recall
Using the Utility Mode
Chapter 5
The job settings appear on the Touch Panel.
After you have checked the settings, touch
[Exit].
Touch [Enter].7
4003P146CA
8
9
4003P147CB
Downloaded From ManualsPrinter.com Manuals 
						

							5-4
1. Job Memory Input and Job Recall
Using the Utility Mode
Chapter 5
Press the Utility key.
Touch [Job/Image/Scan Input].
Touch[JobMemoryInput].Touch [Delete], then touch the job number
key from which you want to delete a job
program.
When appears in that key, it indicates
that the job program has been deleted.
To u c h [ E n t e r ] .
Deleting a Job Program
1
4002O282CA
2
4003P142CA
3
4003P143CA
4
4003P148CB
5
4003P149CB
Downloaded From ManualsPrinter.com Manuals 
						

							5-5
1. Job Memory Input and Job Recall
Using the Utility Mode
Chapter 5
Calling up a Job
Press the Job Recall key.
Touch the job number key in which the
desired job has been stored.
Check the settings made and then touch
[Exit]. The machine is now set up for these
settings and the Basic screen reappears.
If the job recalled is not what you want,
touch [Menu]. Then, the Job Recall screen
reappears.1
4002O283CA
2
4003P150CA
3
4003P151CA
Downloaded From ManualsPrinter.com Manuals 
						

							5-6
Using the Utility Mode
Chapter 5
2. Image Memory Input
Image Memory Input

Up to five different, frequently used characters and marks can be stored in memory so you can use them
later whenever necessary.
NOTE
Image Memory Input cannot be set for a job for which the Auto Copy Start setting has been made.
Press the Utility key.
Touch [Job/Image/Scan Input].
Touch [Image Memory Input].Touch [Input], then touch the desired image
number key, in which you want to store the
image.
NOTE
An image number key not marked with
indicates that an image has already been stored
under that number. If you store a new image in
that number key, the old image is erased.
Select the size of the original, from which to
store an image.
Storing an Image
1
4002O282CA
2
4003P142CA
3
4003P152CA
4
4003P453EC
5
4003P454EB
Downloaded From ManualsPrinter.com Manuals 
						

							5-7
2. Image Memory Input
Using the Utility Mode
Chapter 5

 Touch [AutoDetect] on the screen given in step
5.

 Touch [Custom Size] on the screen given in step
5.
 Touch [
]or[] to set the whole number for X
and touch [X]. The underline moves to the right.
Then touch [
]or[] to set the fractional
number and touch [X]. Now the value for X has
been fixed.
 Do the same for Y, then touch [Enter].If you want to erase the image on the left,
top, or along the frame of the original, touch
[Erase].
You have a choice of the following three
types of erase:
4003P455EB
4003P456EB
4003P457EB
6
4003P458EB
1149O053AA
Left Edge Erase
Stores the image after erasing the left edge of
the original.
Orig.
Input Image
1149O056AA
To p E d g e E r a s e
Stores the image after erasing the top edge of
the original.
Orig.
1149O055AA
Frame Erase
Stores the image after erasing the four edges
of the original.
Orig. Input ImageInput Image
Downloaded From ManualsPrinter.com Manuals 
						

							5-8
2. Image Memory Input
Using the Utility Mode
Chapter 5
Select the desired erase position.
Using [
]or[], set the desired erase
width.
Useful Tip
The erase width can range between 1/4 to 3/4
variable in 1/16 increments.
To u c h [ E n t e r ] .
To u c h [ E n t e r ] .As illustrated on the Touch Panel, place the
original directly on the Original Glass.
Select an image orientation the same as that
of the original.
Press the Start key.
7
4003P459EB
8
4003P460EB
9
10
4003P461EB
11
4002O152AC
12
4003P162CB
13
Downloaded From ManualsPrinter.com Manuals 
						

							5-9
2. Image Memory Input
Using the Utility Mode
Chapter 5
Press the Utility key.
Touch [Job/Image/Scan Input].
Touch [Image Memory Input].Touch [Check], then touch the number key to
be checked.
Selectthetypeofpaperonwhichtoprintthe
programmed image.
Press the Start key and the programmed
image is printed on the copy.
Useful Tip
Programmed images may be checked by using
the screen for calling up a preprogrammed
image.
“Checking the Preprogrammed Image”
 
p.3-64
Checking the Programmed Image
1
4002O282CA
2
4003P142CA
3
4003P152CA
4
4003P463EC
5
4003P464EB
6
Downloaded From ManualsPrinter.com Manuals