Minolta Di450 User Manual

							6-34
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Holding the Grip, slide the Finisher away
from the machine.
Open Misfeed Clearing Guide [FN2].
If “Hole Punch” has been set, turn the Hole
Punch Adjustment Dial four turns
downward. Pull out the sheet of paper.Open Misfeed Clearing Guide [FN3] and
pull out the sheet of paper.
Close Misfeed Clearing Guides [FN3] and
[FN2].
Open Top Offset Tray Cover [FN1].
Pull out the sheet of paper and close Top
Offset Tray Cover [FN1].
Mailbin Finisher
CAUTION
Metallic parts inside Misfeed Clearing
Guide[FN2]areveryhot.
Do not touch anything but the paper to
prevent you from getting burned.
1
4002O234AC
2
4002O235AA
FN2
3
4002O272AB
4
4002O236AC
FN3
5
4002O237ABFN3
FN2
6
1166O173AA
FN1
7
1166O174AA
FN1
Downloaded From ManualsPrinter.com Manuals 
						

							6-35
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Open Right Door [FN4].
Pull out the sheet of paper.
Opening Misfeed Clearing Guide [FN5], pull
out the sheet of paper.
Close Right Door [FN4].Slide the Finisher back against the machine.8
4002O238AB
FN4
9
1166O184AA
10
1166O185AA
11
4002O239AB
FN4
12
4002O240AC
Downloaded From ManualsPrinter.com Manuals 
						

							6-36
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Press the Paper Descent key.
Holding the Lock Release Lever, open the
Cassette Door and pull out the sheet of paper.
Close the Cassette Door.
Press the Lock Release Lever and slide the
cassette away from the machine.Pull out the sheet of paper.
Slide the cassette back against the machine.
Large Capacity Cassette
1
4002O167AC
2
4002O241AC
3
4002O169AC
4
4002O242AC
5
4002O243AC
6
4002O244AD
Downloaded From ManualsPrinter.com Manuals 
						

							6-37
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Downloaded From ManualsPrinter.com Manuals 
						

							6-38
When a Message Appears
Chapter 6
5. When a Staple Misfeed Occurs
Clearing the Staple Misfeed
Holding the Grip, slide the Finisher away
from the machine.
Open the Front Door.
Slide out the Staple Unit.While pressing down the Staple Cartridge
Lever, pull the Staple Cartridge out its port.
Pull the staple sheet about 1-1/4 inches out of
the Staple Cartridge and break off that
portion.
Finisher FN-5
4003P199CA
If a staple misfeed occurs, the message shown on
the left appears.
Clear the staple misfed according to the procedure
given below.
1
4002O187AA
2
4002O339AA
3
1155O068AA
4
1155O069AA
5
1136O012AA
Downloaded From ManualsPrinter.com Manuals 
						

							6-39
5. When a Staple Misfeed Occurs
When a Message Appears
Chapter 6
NOTE
Check that no portion of the staple sheet hangs
out of the cartridge. Break off any portion of the
sheet that hangs out of the cartridge.
Insert the Staple Cartridge until a click is
heard.
Push the Staple Unit back in and close the
Front Door.Slide the Finisher back against the machine.
NOTE
If the Finisher does not staple after clearing the
staple misfeed, call your Tech. Rep.
1134O076AA
6
1155O070AA
7
1155O071AA
8
4002O188AC
Downloaded From ManualsPrinter.com Manuals 
						

							6-40
5. When a Staple Misfeed Occurs
When a Message Appears
Chapter 6
Holding the Grip, slide the Finisher away
from the machine.

Open Right Door [FN7].
Turn the dial to the left to move the Staple
Unit (two Stapler Units in FN-105) toward
the center.
Pull the Staple Cartridge out to the front.

NOTE
Two Staple Cartridges are mounted in Finisher
FN-105.
Push up the guide of the Staple Cartridge and
pull out one staple sheet.
Return the guide back to its original position.
Insert the Staple Cartridge until a click is
heard.

Finisher FN-105/Finisher FN-106
1
4002O175AC
2
4002O176AB
FN7
3
4002O177AB
4
4002O178AAStapler #2 Stapler #1
4002O179AD
Stapler #1
5
4002O256AC
6
4002O257AB
7
4002O182AA
Downloaded From ManualsPrinter.com Manuals 
						

							6-41
5. When a Staple Misfeed Occurs
When a Message Appears
Chapter 6


Close Right Door [FN7].
Slide the Finisher back against the machine.
NOTE
If the Finisher does not staple after clearing the
staple misfeed, call your Tech. Rep.
4002O183AD
8
4002O184AB
FN7
9
4002O185AC
Downloaded From ManualsPrinter.com Manuals 
						

							6-42
5. When a Staple Misfeed Occurs
When a Message Appears
Chapter 6
Open Top Offset Tray Cover [FN1].
Pull out the sheet of paper and close Top
Offset Tray Cover [FN1].
Press and turn the knob to open the cover at
therearoftheFinisher.
Slide out the Staple Unit.While pressing down the green lever, pull out
the Staple Cartridge.
Push up the guide of the Staple Cartridge and
pull out one staple sheet.
Return the guide back to its original position.
Insert the Staple Cartridge into the Staple
Unit until it clicks into place.
Mailbin Finisher
1
1166O173AA
2
1166O174AA
3
1155O766AA
4
1166O127AA
5
1166O128AA
6
1166O177AA
7
1166O178AA
8
1166O130AB
Downloaded From ManualsPrinter.com Manuals 
						

							6-43
5. When a Staple Misfeed Occurs
When a Message Appears
Chapter 6
Align the arrows and firmly push the Staple
Unit down into the well.
Press and turn the knob to lock the cover.
NOTES
 A maximum of about ten stapling sequences
may run idly without driving staples in paper
immediately after clearing the staple misfeed.
During this time, the Staple Unit advances the
staple sheet to the required stapling position.
 If the Finisher does not staple after clearing the
staple misfeed, call your Tech. Rep.
9
1166O131AB
10
1155O767AA
Downloaded From ManualsPrinter.com Manuals