Minolta Di450 User Manual

							Di450/Di550
7664-4002-02
Downloaded From ManualsPrinter.com Manuals 
						

							What is anENERGYSTA R®Products?
AnENERGYSTA R®product has a special feature that allows it to automatically switch to a “low-power
mode” after a period of inactivity. An
ENERGYSTA R®product uses energy more efficienty, saves you
money on utility bills and helps protect the environment.
Recycled Paper (USA market only)
Your Minolta machine has been designed to use the following Recycled Paper
Minolta Recycled Bond Item No. 8925 701
20% Post Consumer Waste
As anENERGYSTA R®Partner, we have determined that this machine
meets the
ENERGYSTA R®Guidelines for energy efficiency.
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals 
						

							P-1
This section contains detailed instructions on the operation and maintenance of this machine. To
achieve optimum utility of this device, all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
Please read the next section before using this device. It contains important information related
to user safety and preventing equipment problems.
Make sure you observe all of the precautions listed in this manual.
*Please note that some parts of the contents of this section may not correspond with the purchased prod-
uct.

 

 
  
 Warning and Precaution Symbols




 
Meaning of Symbols
SAFETY INFORMATION
WARNING:
Ignoring this warning could cause serious injury or even death.
CAUTION:
Ignoring this caution could cause injury or damage to property.
A triangle indicates a danger against which you should take precaution.
This symbol warns against possible electrical shock.
A diagonal line indicates a prohibited course of action.
This symbol warns against dismantling the device.
A black circle indicates an imperative course of action.
This symbol indicates you must unplug the device.
PL 01
Downloaded From ManualsPrinter.com Manuals 
						

							P-2
WARNING
 Do not modify this product, as a fire, electrical shock, or breakdown could result.
If the product employs a laser, the laser beam source could cause blindness.
 Do not attempt to remove the covers and panels which have been fixed to the
product. Some products have a high-voltage part or a laser beam source inside
that could cause an electrical shock or blindness.
 Only use the power cord supplied in the package. Failure to use this cord could
result in a fire or electrical shock.
 Use only the specified power source voltage. Failure to do that could result in a
fire or electrical shock.
 Do not use a multiple outlet adapter to connect any other appliances or machines.
Use of a power outlet for more than the marked current value could result in a fire
or electrical shock.
Do not unplug and plug in the power cord with a wet hand, as an electrical shock
could result.
Plug the power cord all the way into the power outlet. Failure to do this could
result in a fire or electrical shock.
 Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or dam-
age the power cord. Use of a damaged power cord (exposed core wire, broken
wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then call your authorized ser-
vice representative.
 In principle, do not use an extension cord. Use of an extension cord could cause a
fire or electrical shock. Contact your authorized service representative if an
extension cord is required.
Downloaded From ManualsPrinter.com Manuals 
						

							P-3
WARNING
Do not place a flower vase or other container that contains water, or metal clips or
other small metallic objects on this product. Spilled water or metallic objects
dropped inside the product could result in a fire, electrical shock, or breakdown.
Should a piece of metal, water, or any other similar foreign matter get inside the
product, immediately turn OFF the power switch, unplug the power cord from the
power outlet, and then call your authorized service representative.
 If this product becomes inordinately hot or emits smoke, or unusual odor or noise,
immediately turn OFF the power switch, unplug the power cord from the power
outlet, and then call your authorized service representative. If you keep on using it
as is, a fire or electrical shock could result.
 If this product has been dropped or its cover damaged, immediately turn OFF the
power switch, unplug the power cord from the power outlet, and then call your
authorized service representative. If you keep on using it as is, a fire or electrical
shock could result.
Do not throw the toner cartridge or toner into an open flame. The hot toner may
scatter and cause burns or other damage.
Connect the power cord to an electrical outlet that is equipped with a grounding
terminal.
Downloaded From ManualsPrinter.com Manuals 
						

							P-4
CAUTION
 Do not use flammable sprays, liquids, or gases near this product, as a fire could
result.
 Do not leave a toner unit or drum unit in a place within easy reach of children.
Licking or ingesting any of these things could injure your health.
 Do not let any object plug the ventilation holes of this product. Heat could accu-
mulate inside the product, resulting in a fire or malfunction.
 Do not install this product at a site that is exposed to direct sunlight, or near an air
conditioner or heating apparatus. The resultant temperature changes inside the
product could cause a malfunction, fire, or electrical shock.
 Do not place the product in a dusty place, or a site exposed to soot or steam, near a
kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown could
result.
 Do not place this product on an unstable or tilted bench, or in a location subject to
a lot of vibration and shock. It could drop or fall, causing personal injury or
mechanical breakdown.
 After installing this product, mount it on a secure base. If the unit moves or falls,
it may cause personal injury.
 Do not store toner units and PC drum units near a floppy disk or watch that are
susceptible to magnetism. They could cause these products to malfunction.
The inside of this product has areas subject to high temperature, which may cause
burns. When checking the inside of the unit for malfunctions such as a paper mis-
feed, do not touch the locations (around the fusing unit, etc.) which are indicated by
a “Caution ! High Temperature !” warning label.
Do not place any objects around the power plug as the power plug may be difficult
to pull out when an emergency occurs.
 Always use this product in a well ventilated location. Operating the product in a
poorly ventilated room for an extended period of time could injure your health.
Ventilate the room at regular intervals.
 Whenever moving this product, be sure to disconnect the power cord and other
cables.Failuretodothiscoulddamagethecordorcable,resultinginafire,elec-
trical shock, or breakdown.
 When moving this product, always hold it by the locations specified in the opera-
tor’s manual or other documents. If the unit falls it may cause severe personal
injury. The product may also be damaged or malfunction.
 Remove the power plug from the outlet more than one time a year and clean the
area between the plug terminals. Dust that accumulates between the plug termi-
nals may cause a fire.
 When unplugging the power cord, be sure to hold onto the plug. Pulling on the
power cord could damage the cord, resulting in a fire or electrical shock.
Downloaded From ManualsPrinter.com Manuals 
						

							P-5
Precautions for Routine Use
 Do not store toner units, PC drum units, and other supplies and consumables in a
place subject to direct sunlight and high temperature and humidity, as poor
image quality and malfunction could result.
 Do not attempt to replace the toner unit and PC drum unit in a place exposed to
direct sunlight. If the PC drum is exposed to intense light, poor image quality
could result.
 Do not unpack a toner unit or PC drum unit until the very time of use. Do not
leave an unpacked unit standing. Install it immediately or poor image quality
could result.
 Do not keep toner units and PC drum units in an upright position or upside
down, as poor image quality could result.
 Do not throw or drop a toner unit or PC drum unit as poor image quality could
result.
 Do not use this product in an area where ammonia or other gases or chemicals
are present. Failure to do so may shorten the service life of the product, cause
damage or decrease performance.
 Do not use this product in an environment with a temperature outside the range
specified in the operator’s manual, as a breakdown or malfunction could result.
 Do not attempt to feed stapled paper, carbon paper or aluminum foil through this
product, as a malfunction or fire could result.
Do not touch or scratch the surface of the toner unit, developing roller and the
PC drum, as poor image quality could result.
Use the supplies and consumables recommended by the dealer. Use of any sup-
ply or consumable not recommended could result in poor image quality and
breakdown.
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals 
						

							i
For United States and Canada Users
Thank you for choosing Minolta quality. For over 30 years Minolta has been a leader on the forefront of
office equipment technology and service. Our desire has always been to bring you highly reliable
products. We pledge to continue to provide you, our customer, with our state of the art equipment, as
well as full customer service for all our products. We look forward to a long healthy relationship with
you and our company. If you have any questions or comments about Minolta, our product or service,
please let us know. Our fax number is 800-237-8087 (for the U.S.A. and Canada). Thank you again.
This operator’s manual explains how to operate the machine and replenish its supplies. It also gives
some troubleshooting tips as well as general precautions to be observed when operating the machine.
To ensure the best performance and effective use of your machine, read this manual carefully until you
familiarize yourself thoroughly with its operation and features. After you have read through the
manual, keep it ready for reference.
Please use this manual as a quick and handy reference tool for immediately clarifying any questions
which may arise.
WA R N I N G
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
The design and production of this unit conforms to FCC Regulations, and any changes or modifications
must be registered with the FCC and are subject to FCC control. Any changes made by the purchaser or
user without first contacting the manufacturer will be subject to penalty under FCC regulations.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
This device must be used with shielded interface cables. The use of non-shielded cable is likely to
result in interference with radio communications and is prohibited under FCC rules.
MC-F02
FCC-F01
IC-F03
Downloaded From ManualsPrinter.com Manuals