Minolta Di450 User Manual
Have a look at the manual Minolta Di450 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 7 Minolta manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 176
6-9
3. When the Message “Stapler is empty.” Appears
When a Message Appears
Chapter 6
NOTE
Check that no portion of the staple sheet hangs
out of the cartridge. Break off any portion of the
sheet that hangs out of the cartridge.
InsertthenewStapleCartridgeuntilaclick
is heard.
Push the Staple Unit back in and close the
Front Door.Slide the Finisher back against the machine.
Touch [Staple] shown on the Touch Panel
and the machine automatically feeds a sheet
of paper to test the stapling.
Remove the sheet...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-175.png "Page 176
6-9
3. When the Message “Stapler is empty.” Appears
When a Message Appears
Chapter 6
NOTE
Check that no portion of the staple sheet hangs
out of the cartridge. Break off any portion of the
sheet that hangs out of the cartridge.
InsertthenewStapleCartridgeuntilaclick
is heard.
Push the Staple Unit back in and close the
Front Door.Slide the Finisher back against the machine.
Touch [Staple] shown on the Touch Panel
and the machine automatically feeds a sheet
of paper to test the stapling.
Remove the sheet...")
![Page 177
6-10
3. When the Message “Stapler is empty.” Appears
When a Message Appears
Chapter 6
Holding the Grip, slide the Finisher away
from the machine.
Open Right Door [FN7].
Turn the dial to the left to move the Staple
Unit (two Stapler Units in FN-105) toward
the center.
Pull the Staple Cartridge out to the front.
NOTE
Two Staple Cartridges are mounted in Finisher
FN-105. Be sure to remove the specific Staple
Cartridge that is indicated in the message on the
To u c h Pa n e l .
Pinch the portions of the...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-176.png "Page 177
6-10
3. When the Message “Stapler is empty.” Appears
When a Message Appears
Chapter 6
Holding the Grip, slide the Finisher away
from the machine.
Open Right Door [FN7].
Turn the dial to the left to move the Staple
Unit (two Stapler Units in FN-105) toward
the center.
Pull the Staple Cartridge out to the front.
NOTE
Two Staple Cartridges are mounted in Finisher
FN-105. Be sure to remove the specific Staple
Cartridge that is indicated in the message on the
To u c h Pa n e l .
Pinch the portions of the...")
![Page 178
6-11
3. When the Message “Stapler is empty.” Appears
When a Message Appears
Chapter 6
Load a new staple clip in the Staple Cartridge
and return the upper part of the cartridge
back again.
Gently peel off the stopper seal.
Load a new staple clip into the Staple
Cartridge and carefully peel off the Seal.
InsertthenewStapleCartridgeuntilaclick
is heard.
Close Right Door [FN7].
Slide the Finisher back against the machine.
Touch [Staple] shown on the Touch Panel
and the machine automatically feeds a...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-177.png "Page 178
6-11
3. When the Message “Stapler is empty.” Appears
When a Message Appears
Chapter 6
Load a new staple clip in the Staple Cartridge
and return the upper part of the cartridge
back again.
Gently peel off the stopper seal.
Load a new staple clip into the Staple
Cartridge and carefully peel off the Seal.
InsertthenewStapleCartridgeuntilaclick
is heard.
Close Right Door [FN7].
Slide the Finisher back against the machine.
Touch [Staple] shown on the Touch Panel
and the machine automatically feeds a...")
![Page 180
6-13
3. When the Message “Stapler is empty.” Appears
When a Message Appears
Chapter 6
Touch [Staple] shown on the Touch Panel
and the machine automatically feeds a sheet
of paper to test the stapling.
Remove the sheet of paper to check that it
has been properly stapled.
* If no staples are evident, clear the staple
misfed.
“Clearing the Staple Misfeed.”p. 6-42
NOTES
Reload the Staple Cartridge only after you are
prompted to do so by the message. Removing
the Staple Cartridge before then will result...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-179.png "Page 180
6-13
3. When the Message “Stapler is empty.” Appears
When a Message Appears
Chapter 6
Touch [Staple] shown on the Touch Panel
and the machine automatically feeds a sheet
of paper to test the stapling.
Remove the sheet of paper to check that it
has been properly stapled.
* If no staples are evident, clear the staple
misfed.
“Clearing the Staple Misfeed.”p. 6-42
NOTES
Reload the Staple Cartridge only after you are
prompted to do so by the message. Removing
the Staple Cartridge before then will result...")
![Page 183
6-16
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Misfeed Clearing Procedures
Remove the papers from the Exit Tray and
open the Front Door.
Open Upper Left Door [L1].
Turning Misfeed Removal Knob [M1], pull
out the sheet of paper.Opening Misfeed Clearing Guide [M2],
remove the sheet of paper.
Close Upper Left Door [L1] and reinstall the
Exit Tray.
Open Middle Left Door [L2].
Pull out the sheet of paper. Then, close
Middle Left Door [L2].
Machine
CAUTION
The area around...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-182.png "Page 183
6-16
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Misfeed Clearing Procedures
Remove the papers from the Exit Tray and
open the Front Door.
Open Upper Left Door [L1].
Turning Misfeed Removal Knob [M1], pull
out the sheet of paper.Opening Misfeed Clearing Guide [M2],
remove the sheet of paper.
Close Upper Left Door [L1] and reinstall the
Exit Tray.
Open Middle Left Door [L2].
Pull out the sheet of paper. Then, close
Middle Left Door [L2].
Machine
CAUTION
The area around...")
![Page 184
6-17
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Pull down Transport Section Release Lever
[M3] to the front.
Remove the sheet of paper.
Push Transport Section Release Lever [M3]
back into the original position and close the
Front Door.
Open Upper Right Door [R1].Pull out the sheet of paper from the Paper
Take-up Section. Then, close the Upper
Right Door [R1].
Slide out the drawer being used and take out
the paper stack left in it.
Reload the paper stack in the drawer...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-183.png "Page 184
6-17
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Pull down Transport Section Release Lever
[M3] to the front.
Remove the sheet of paper.
Push Transport Section Release Lever [M3]
back into the original position and close the
Front Door.
Open Upper Right Door [R1].Pull out the sheet of paper from the Paper
Take-up Section. Then, close the Upper
Right Door [R1].
Slide out the drawer being used and take out
the paper stack left in it.
Reload the paper stack in the drawer...")
![Page 185
6-18
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Open Lower Right Door [R2].
Pull out the sheet of paper from the Paper
Take-up Section. Then, close Lower Right
Door [R2].
Slide out the drawer being used and take out
the paper stack left in it.
Reload the paper stack in the drawer and
slide the drawer back into the machine.To reset the paper misfeed indication on the
Touch Panel, open and close the Front Door.
2Way Paper Feed Cabinet
1
4002O274AA
R2
2
4002O275AA
R2
3...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-184.png "Page 185
6-18
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Open Lower Right Door [R2].
Pull out the sheet of paper from the Paper
Take-up Section. Then, close Lower Right
Door [R2].
Slide out the drawer being used and take out
the paper stack left in it.
Reload the paper stack in the drawer and
slide the drawer back into the machine.To reset the paper misfeed indication on the
Touch Panel, open and close the Front Door.
2Way Paper Feed Cabinet
1
4002O274AA
R2
2
4002O275AA
R2
3...")
![Page 186
6-19
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Open Lower Right Door [R2].
Pull out the sheet of paper from the Paper
Take-up Section. Then, close Lower Right
Door [R2].
Press the Paper Descent key and then slide
the drawer out.
Take out the paper stack left in the drawer.Reload the paper stack in the drawer and
slide the drawer back into the machine.
To reset the paper misfeed indication on the
Touch Panel, open and close the Front Door.
Large Capacity Cabinet
1...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-185.png "Page 186
6-19
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Open Lower Right Door [R2].
Pull out the sheet of paper from the Paper
Take-up Section. Then, close Lower Right
Door [R2].
Press the Paper Descent key and then slide
the drawer out.
Take out the paper stack left in the drawer.Reload the paper stack in the drawer and
slide the drawer back into the machine.
To reset the paper misfeed indication on the
Touch Panel, open and close the Front Door.
Large Capacity Cabinet
1...")
6-14 When a Message Appears Chapter 6 4. When the Message “Misfeed detected.” Appears Misfeed Location Displays Different procedures are used to clear a misfed sheet of paper depending on the location. First, isolate the location, then clear the misfeed according to the procedure applicable to the misfeed occurring at that particular location. A blinking dot “ ” indicates that there is a misfeed at that location. A lit dot “ ” indicates that there might be a sheet of paper stopped at that location. 4003P189CA If a paper misfeed occurs while the machine is running, the message shown on the left appears and the machine is brought to an immediate stop. Clear the misfed sheet of paper according to the procedure given below. Finisher/Mailbin Finisher Electronic Document Handler Large Capacity Cassette Inside the Machine 4002P190AC Downloaded From ManualsPrinter.com Manuals
6-15 4. When the Message “Misfeed detected.” Appears When a Message Appears Chapter 6 Machine p. 6-16 Duplex Unit p. 6-20 Electronic Document Handler p. 6-22 Finisher FN-105 p. 6-32 Mailbin Finisherp. 6-34 4002P191AC 4002P192AB 4002P194AB 4002P196AC 4002P197AB Paper Feed Cabinet p. 6-18 Intelligent Multi Bypass Tray p. 6-21 Finisher FN-5 p. 6-24 Finisher FN-106 p. 6-32 Large Capacity Cassette p. 6-36 4002P258AA 4002P193AB 4002P195AB 4002P196AC 4002P198AB Downloaded From ManualsPrinter.com Manuals
6-16 4. When the Message “Misfeed detected.” Appears When a Message Appears Chapter 6 Misfeed Clearing Procedures Remove the papers from the Exit Tray and open the Front Door. Open Upper Left Door [L1]. Turning Misfeed Removal Knob [M1], pull out the sheet of paper.Opening Misfeed Clearing Guide [M2], remove the sheet of paper. Close Upper Left Door [L1] and reinstall the Exit Tray. Open Middle Left Door [L2]. Pull out the sheet of paper. Then, close Middle Left Door [L2]. Machine CAUTION The area around the Fusing Unit is very hot. Do not touch anything but the paper to prevent you from getting burned. 1 4002O196AD 2 4002O197AC L1 3 4002O273AB M1 4 4002O198AB M2 5 6 4002O318AA L2 7 4002O319AA L2 Downloaded From ManualsPrinter.com Manuals
6-17 4. When the Message “Misfeed detected.” Appears When a Message Appears Chapter 6 Pull down Transport Section Release Lever [M3] to the front. Remove the sheet of paper. Push Transport Section Release Lever [M3] back into the original position and close the Front Door. Open Upper Right Door [R1].Pull out the sheet of paper from the Paper Take-up Section. Then, close the Upper Right Door [R1]. Slide out the drawer being used and take out the paper stack left in it. Reload the paper stack in the drawer and slide the drawer back into the machine. To reset the paper misfeed indication on the Touch Panel, open and close the Front Door.8 4002O199AC M3 9 4002O200AC 10 4002O201AB M3 11 4002O202AB R1 12 4002O203AB R1 13 4002O204AC 14 4002O205AC 15 4002O206AC Downloaded From ManualsPrinter.com Manuals
6-18 4. When the Message “Misfeed detected.” Appears When a Message Appears Chapter 6 Open Lower Right Door [R2]. Pull out the sheet of paper from the Paper Take-up Section. Then, close Lower Right Door [R2]. Slide out the drawer being used and take out the paper stack left in it. Reload the paper stack in the drawer and slide the drawer back into the machine.To reset the paper misfeed indication on the Touch Panel, open and close the Front Door. 2Way Paper Feed Cabinet 1 4002O274AA R2 2 4002O275AA R2 3 4002O217AC 4 4002O218AD 5 4002O206AC Downloaded From ManualsPrinter.com Manuals
6-19 4. When the Message “Misfeed detected.” Appears When a Message Appears Chapter 6 Open Lower Right Door [R2]. Pull out the sheet of paper from the Paper Take-up Section. Then, close Lower Right Door [R2]. Press the Paper Descent key and then slide the drawer out. Take out the paper stack left in the drawer.Reload the paper stack in the drawer and slide the drawer back into the machine. To reset the paper misfeed indication on the Touch Panel, open and close the Front Door. Large Capacity Cabinet 1 4002O213AA R2 2 4002O214AA R2 3 4002O157AB 4 4002O215AC 5 4002O216AA 6 4002O206AC Downloaded From ManualsPrinter.com Manuals
6-20 4. When the Message “Misfeed detected.” Appears When a Message Appears Chapter 6 Open Middle Left Door [L2] and Lower Left Door [L3]. Pull out the sheet of paper. Then, close Middle Left Door [L2] and Lower Left Door [L3]. Open Lower Right Door [R2]. Pull out the sheet of paper from the Paper Take-up Section. Then, close Lower Right Door [R2].Slide out Duplex Unit. Open Misfeed Clearing Guide [D] and remove the sheet of paper. Close Misfeed Clearing Guide [D] and slide the Duplex Unit back into the cabinet. To reset the paper misfeed indication on the Touch Panel, open and close the Front Door. Duplex Unit 1 4002O207AC L2 L3 2 4002O208AC L2 L3 3 4002O209AA R2 4 4002O210AA R2 5 4002O211AA 6 4002O212AA D 7 8 4002O206AC Downloaded From ManualsPrinter.com Manuals
6-21 4. When the Message “Misfeed detected.” Appears When a Message Appears Chapter 6 Remove the paper stack from the Intelligent Multi Bypass Tray and open Upper Right Door [R1]. Pull out the sheet of paper from the Paper Take-Up Section. Then, close Upper Right Door [R1]. Reload the paper stack back on the tray. To reset the paper misfeed indication on the Touch Panel, open and close the Front Door. Intelligent Multi Bypass Tray 1 4002O219AB R1 2 4002O220AA R1 3 4002O221AB 4 4002O206AC Downloaded From ManualsPrinter.com Manuals
6-22 4. When the Message “Misfeed detected.” Appears When a Message Appears Chapter 6 Remove the originals from the Document Handling Tray. Open Misfeed Clearing Guide [F1]. Open Misfeed Clearing Guide [F2] and gently pull out the original. Pull up Document Handling Tray [F3] until a click is heard and then gently pull out the original.Open Misfeed Clearing Tray [F4] and then gently pull out the original. Pinching the lever on Document Handling Tray [F3], bring the tray back down. Raise the Electronic Document Handler. Opening [F5] Lever, gently pull out the original. Electronic Document Handler 1 4002O222AD 2 4002O223AC F1 3 4002O224AC F2 4 4002O225AB F3 5 F4 4002O226AB 6 4002O227AB F3 7 4002O228AC 8 4002O229AB F5 Downloaded From ManualsPrinter.com Manuals
6-23 4. When the Message “Misfeed detected.” Appears When a Message Appears Chapter 6 Opening [F6] Lever, gently pull out the original. Lower the Electronic Document Handler. Close Misfeed Clearing Guides [F1] and [F2]. Reload the originals as instructed on the Touch Panel.9 4002O230AB F6 10 4002O231AC 11 4002O232AC F1 F2 12 4002O233AC Downloaded From ManualsPrinter.com Manuals