Minolta Di450 User Manual

							ii
Except United States and Canada Users
Thank you for choosing Minolta.
This operator’s manual explains how to operate the machine and replenish its supplies. It also gives
some troubleshooting tips as well as general precautions to be observed when operating the machine.
To ensure the best performance and effective use of your machine, read this manual carefully until you
familiarize yourself thoroughly with its operation and features. After you have read through the
manual, keep it for ready reference.
Please use this manual as a quick and handy reference tool for immediately clarifying any questions
which may arise.
This device must be used with shielded interface cables. The use of non-shielded cable is likely to
result in interference with radio communications.
Downloaded From ManualsPrinter.com Manuals 
						

							iii
Contents
Safety Precautions ............................................................................................vii
Laser Safety Label ............................................................................................vii
Safety Information .......................................................................................... viii
Laser Safety .................................................................................................... viii
Terms and Symbols for the Type of Originals and Paper .................................. x
Feeding Direction (paper path) .......................................................................... x
Chapter 1 Safety Notes
1. Installing the Machine
Installation Site ............................................................................................... 1-2
Power Source .................................................................................................. 1-2
Space Requirements ....................................................................................... 1-2
2. Precautions for Use
Operating Environment .................................................................................. 1-3
Acoustic noise ................................................................................................ 1-3
Using the Machine Properly ........................................................................... 1-3
Moving the Machine ...................................................................................... 1-3
Care of Machine Supplies .............................................................................. 1-4
Note on making multiple copies ..................................................................... 1-4
Legal Restrictions on Copying ....................................................................... 1-4
Chapter 2 Getting to Know Your Machine
1. Typical Copies You Can Make with Your Machine
Typical copies you can make with your machine .......................................... 2-2
2. System Overview
System Overview ........................................................................................... 2-6
3. Machine Parts and Accessories
Machine Parts and Accessories ...................................................................... 2-8
4. Control Panel Keys and Indicators
Control Panel Keys and Indicators ............................................................... 2-14
5. Using the Touch Panel
What is a Touch Panel? ................................................................................ 2-16
How the Screen is Organized ....................................................................... 2-16
Operating the Touch Panel ........................................................................... 2-17
6. Turning ON and OFF and Initial Mode
Turning ON and OFF ................................................................................... 2-18
When Machine is Turned ON ...................................................................... 2-18
Initial Mode .................................................................................................. 2-18
7. Auxiliary Functions
Auxiliary Functions ...................................................................................... 2-19
Chapter 3 Making Copies
1. Using Basic Copying Functions
Basic Copying Procedures ............................................................................. 3-2
2. Placing the Original
Using the Electronic Document Handler ....................................................... 3-4
Using the Original Glass ................................................................................ 3-6
Using the SADF Mode ................................................................................... 3-8
Downloaded From ManualsPrinter.com Manuals 
						

							iv
Contents
3. Selecting the Paper
Paper Size ....................................................................................................... 3-9
Manual Bypass Copying ............................................................................... 3-11
4. Selecting the Zoom
Zoom Ratio ................................................................................................... 3-14
5. Selecting the Finishing
Finishing Functions ....................................................................................... 3-20
Selecting the Finishing Function .................................................................. 3-22
Loading the Originals ................................................................................... 3-32
Auto Dual Function ...................................................................................... 3-34
Note on Stapling ........................................................................................... 3-35
6. Selecting the Original Copy Type
Original Copy Types ................................................................................. 3-36
Selecting the Original Copy Type ............................................................ 3-38
Some Precautions for Making Copies .......................................................... 3-42
Handy Feature Available from Initial Mode Setting .................................... 3-43
7. Selecting the Density
Image Density ............................................................................................... 3-44
8. Auxiliary Functions
Cover ............................................................................................................. 3-46
Page Insertion ............................................................................................... 3-49
OHP Interleaving .......................................................................................... 3-52
File Margin ................................................................................................... 3-54
Edge/Frame Erase ......................................................................................... 3-56
Image Repeat ................................................................................................ 3-58
Number Stamping ......................................................................................... 3-60
Image Stamping ............................................................................................ 3-64
9. Selecting Mixed Orig. Detection and Other Functions
Mixed Orig. Detection and Other Functions ................................................ 3-66
10. Selecting the Job Functions
Memory Recall ............................................................................................. 3-68
Reserve .......................................................................................................... 3-69
Job List .......................................................................................................... 3-70
Chapter 4 Typical Function Combinations
1. Making Different Types of Copy
Reading the Table ........................................................................................... 4-2
2. Using 1-Sided Originals
Making 1-Sided Copies from 1-Sided Originals ............................................ 4-3
Making 2-Sided Copies from 1-Sided Originals ............................................ 4-6
3. Using 2-Sided Originals with Filing Margin along Left Edges
Making 1-Sided Copies from 2-Sided Originals
with Filing Margin along Left Edges .............................................................. 4-9
Making 2-Sided Copies from 2-Sided Originals
with Filing Margin along Left Edges ............................................................ 4-12
4. Using 2-Sided Originals with Filing Margin along Top Edges
Making 1-Sided Copies from 2-Sided Originals
with Filing Margin along Top Edges ............................................................ 4-15
Making 2-Sided Copies from 2-Sided Originals
with Filing Margin along Top Edges ............................................................ 4-18

 



Downloaded From ManualsPrinter.com Manuals 
						

							v
Contents
5. Using Large-Size Originals
Precautions When Making Copies on 11×17L or LegalL ............................ 4-21
6. Stapled Position
Precautions for Stapling ............................................................................... 4-22
Chapter 5 Using the Utility Mode
1. Job Memory Input and Job Recall
Job Memory Input .......................................................................................... 5-2
Calling up a Job .............................................................................................. 5-5
2. Image Memory Input
Image Memory Input ...................................................................................... 5-6
3. Meter Count and Toner Replenisher
Meter Count .................................................................................................. 5-11
Toner Replenisher ........................................................................................ 5-11
4. User’s Choice
User’s Choice Functions .............................................................................. 5-12
Making the User’s Choice Settings .............................................................. 5-17
5. Administrator Mode
Selecting the Administrator Mode ............................................................... 5-18
Administrator Mode Functions .................................................................... 5-19
Setting Administrator Mode ......................................................................... 5-20
Chapter 6 When a Message Appears
1. When the Message “Replenish paper.” Appears
Adding paper .................................................................................................. 6-2
2. When the Message “Please add Toner.” Appears
Replacing the Toner Bottle ............................................................................ 6-6
3. When the Message “Stapler is empty.” Appears
Replacing the Staple Cartridge ....................................................................... 6-8
4. When the Message “Misfeed detected.” Appears
Misfeed Location Displays ........................................................................... 6-14
Misfeed Clearing Procedures ....................................................................... 6-16
5. When a Staple Misfeed Occurs
Clearing the Staple Misfeed ......................................................................... 6-38
6. When the Message “Malfunction Detected.” Appears
Malfunction Resetting Procedure ................................................................. 6-44
7. What Does Each Message Mean?
What does each message mean? ................................................................... 6-45
8. When This Type of Copy is Produced
When this type of copy is produced ............................................................. 6-46
9. The Machine is not Functioning as Designed
The machine is not functioning as designed ................................................ 6-48
Chapter 7 Miscellaneous
1. Specifications
Specifications ................................................................................................. 7-2
2. Care of the Machine
Cleaning ....................................................................................................... 7-10
Downloaded From ManualsPrinter.com Manuals 
						

							vi
Contents
3. Function Combination Matrix
Function Combination Matrix ...................................................................... 7-12
Conditions for Combined Functions ............................................................. 7-14
4. List of Paper Sizes and Zoom Ratios
List of Paper Sizes and Zoom Ratios ............................................................ 7-15
Index
Downloaded From ManualsPrinter.com Manuals 
						

							vii
Safety Precautions
Laser Safety Label
A laser safety label is attached to the outside of the machine as shown below.
The Manufacturer’s Name Plate is affixed at the position illustrated above.
Please write down the Model Name and Serial No. of your machine here.
Model:
Serial No.
4002O110AC
4002O336CA
4002O312CA
For Europe
For United States
1155O764AA
CLASS 1 LASER PRODUCTLASER KLASSE 1PRODUCT
Downloaded From ManualsPrinter.com Manuals 
						

							viii
Safety Precautions
Safety Information
Laser Safety
This is a digital machine which operates by means of a laser. There is no possibility of danger from the
laser, provided the machine is operated according to the instructions in this manual.
Since radiation emitted by the laser is completely confined within protective housing, the laser beam
cannot escape from the machine during any phase of user operation.
This machine is certified as a Class 1 laser product. This means the machine does not produce hazardous
laser radiation.
Internal Laser Radiation
Maximum Average Radiation Power: 13.6µW at the laser aperture of the print head unit.
Wavelength: 785nm
This product employs a Class 3b laser diode that emits an invisible laser beam.
The laser diode and the scanning polygon mirror are incorporated in the print head unit.
The print head unit is NOT A FIELD SERVICE ITEM.
Therefore, the print head unit should not be opened under any circumstances.
CDRH Regulation
This machine is certified as a Class I Laser product under Radiation Performance Standard according to
the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the
United States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S.
Food and Drug Administration of the U.S. Department of Health and Human Services (DHHS). This
means that the device does not produce hazardous laser radiation.
The label shown to page vii indicates compliance with the CDRH regulations and must be attached to
laser products marketed in the United States.
This is a semiconductor laser. The maximum power of the laser diode is 0.68mW and the wavelength is
785nm.
4002O277AA
Print Head
CAUTION
Use of controls, adjustments or performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
Downloaded From ManualsPrinter.com Manuals 
						

							ix
Safety Precautions
For European Users
This is a semiconductor laser. The maximum power of the laser diode is 0.68mW and the wavelength is
785nm.
For Denmark Users
Dansk: Dette er en halvlederlaser. Laserdiodens højeste styrke er 0.68mW og bølgelængden er 785nm.
For Finland, Sweden Users
Tämä on puolijohdelaser. Laserdiodin suurin teho on 0.68mW ja aallonpituus on 785nm.
Det här är en halvledarlaser. Den maximala effekten för laserdioden är 0.68mW och våglängden är
785nm.
For Norway Users
Dette en halvleder laser. Maksimal effekt till laserdiode er 0.68mW og bølgelengde er 785nm.CAUTION
Use of controls, adjustments or performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
ADVARSEL
Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for
stråling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene.
LOUKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
VAROITUS!
Laitteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
VARNING!
Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas
för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
VARO!
Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Älä katso säteeseen.
VARNING!
Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. Betrakta ej strålen.
ADVERSEL
Dersom apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan brukeren utsettes
for unsynlig laserstråling som overskrider grensen for laser klass 1.
Downloaded From ManualsPrinter.com Manuals 
						

							x
Terms and Symbols for the Type of Originals and Paper
A few special terms and symbols are used in this manual to designate types of originals and paper. This
page explains about these terms and symbols.
Feeding Direction (paper path)
In this machine system, paper is taken up from the right-hand side of the machine and fed through the
machine toward the left-hand side onto the Copy Tray. In the figure below, the direction in which the
paper is fed, as indicated by the arrow, is called the “feeding direction.”
“Width” and “Length”
Terms and Symbols Used
4002O120AC
1139O1610A
When we talk about the size of the original or copy,
we call side A “width” and side B “length.”
A: Width
B: Length
1139O1610A

When the original or copy has a “length” longer than
its “width,” we call it “lengthwise” and use symbol
“L” or “ .”
1139O1620A

When the original or copy has a “length” shorter
than its “width,” we call it “crosswise” and use
symbol “C” or “ .”
Downloaded From ManualsPrinter.com Manuals 
						

							Safety Notes
Chapter 1
1-1
Chapter 1
Safety Notes
Downloaded From ManualsPrinter.com Manuals