Minolta Di450 User Manual
Have a look at the manual Minolta Di450 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 7 Minolta manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
3-23
5. Selecting the Finishing
Making Copies
Chapter 3
Touch the desired finishing function key and
then touch [Hole Punch].
NOTES
Papersize
Fi n i s h e r FN - 5 :1 1
×17L to Letter
Finisher FN-105 :11
×17L to Letter
Mailbin Finisher :11
×17L to Letter
Hole Punch is not possible in the Interrupt
mode.
When making copies in the Hole Punch mode,
make sure to load the originals into the
Electronic Document Handler or place the
Originals on the original Glass in the correct
direction.
p.3-33
...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-65.png "Page 66
3-23
5. Selecting the Finishing
Making Copies
Chapter 3
Touch the desired finishing function key and
then touch [Hole Punch].
NOTES
Papersize
Fi n i s h e r FN - 5 :1 1
×17L to Letter
Finisher FN-105 :11
×17L to Letter
Mailbin Finisher :11
×17L to Letter
Hole Punch is not possible in the Interrupt
mode.
When making copies in the Hole Punch mode,
make sure to load the originals into the
Electronic Document Handler or place the
Originals on the original Glass in the correct
direction.
p.3-33
...")
![Page 67
3-24
5. Selecting the Finishing
Making Copies
Chapter 3
[Select Position] key:
Use this key when you want to place your original
in a direction other than the standard or make
punch holes in positions other than those made
automatically.
Touch [Select Position].
Touch the desired hole-punching position.
To u c h [ E n t e r ] .
Touch the desired finishing function key.
Touch the stapling key of your choice.
You have a choice of the following two stapling
types.
* When you touch a stapling key in the...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-66.png "Page 67
3-24
5. Selecting the Finishing
Making Copies
Chapter 3
[Select Position] key:
Use this key when you want to place your original
in a direction other than the standard or make
punch holes in positions other than those made
automatically.
Touch [Select Position].
Touch the desired hole-punching position.
To u c h [ E n t e r ] .
Touch the desired finishing function key.
Touch the stapling key of your choice.
You have a choice of the following two stapling
types.
* When you touch a stapling key in the...")
![Page 68
3-25
5. Selecting the Finishing
Making Copies
Chapter 3
Touch [Select Position].
NOTE
The stapling position cannot be specified if
Corner Staple is selected. It can, however, be
specified if Corner Staple is combined with Hole
Punch.
Touch the desired stapling position on the
Touch Panel.
Touch [Enter].
NOTES
Stapling is not possible in the Interrupt mode.
Note the correct direction of the originals when
making copies in the Sort Staple mode.
p.3-32
Note the position at which the copy set or...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-67.png "Page 68
3-25
5. Selecting the Finishing
Making Copies
Chapter 3
Touch [Select Position].
NOTE
The stapling position cannot be specified if
Corner Staple is selected. It can, however, be
specified if Corner Staple is combined with Hole
Punch.
Touch the desired stapling position on the
Touch Panel.
Touch [Enter].
NOTES
Stapling is not possible in the Interrupt mode.
Note the correct direction of the originals when
making copies in the Sort Staple mode.
p.3-32
Note the position at which the copy set or...")
![Page 69
3-26
5. Selecting the Finishing
Making Copies
Chapter 3
Open Staple Tray Cover [FN10].
Align the sheets of paper neatly.
Insert a neat stack of paper face down into
the Staple Tray.
NOTES
Make sure of the stapling position and press the
paper stack against the end bracket.
Up to 50 sheets of plain paper can be stapled.Slide the Paper Guide Plate to the size of the
paper.
NOTE
Make sure that the Paper Guide Plates are in
touch with the edge of the paper stack.
CloseStapleTrayCover[FN10].
After you...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-68.png "Page 69
3-26
5. Selecting the Finishing
Making Copies
Chapter 3
Open Staple Tray Cover [FN10].
Align the sheets of paper neatly.
Insert a neat stack of paper face down into
the Staple Tray.
NOTES
Make sure of the stapling position and press the
paper stack against the end bracket.
Up to 50 sheets of plain paper can be stapled.Slide the Paper Guide Plate to the size of the
paper.
NOTE
Make sure that the Paper Guide Plates are in
touch with the edge of the paper stack.
CloseStapleTrayCover[FN10].
After you...")
![Page 70
3-27
5. Selecting the Finishing
Making Copies
Chapter 3
You have a choice of the following three stapling
positions.
Press the key. This staples the copy
stack or set.
Useful Tip
This feature is useful for stapling originals after
making copies.
Open Staple Tray Cover [FN10] and remove
the stapled paper stack.
Close Staple Tray Cover [FN10].
Paper size : 11×17L to Letter
Number of sheets : 2 to 50
4002O094AA
4002O095AA
Paper size : 11×17L to Letter
Number of sheets : 2 to 50
4002O096AA
Paper size : 11...](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-69.png "Page 70
3-27
5. Selecting the Finishing
Making Copies
Chapter 3
You have a choice of the following three stapling
positions.
Press the key. This staples the copy
stack or set.
Useful Tip
This feature is useful for stapling originals after
making copies.
Open Staple Tray Cover [FN10] and remove
the stapled paper stack.
Close Staple Tray Cover [FN10].
Paper size : 11×17L to Letter
Number of sheets : 2 to 50
4002O094AA
4002O095AA
Paper size : 11×17L to Letter
Number of sheets : 2 to 50
4002O096AA
Paper size : 11...")
![Page 74
3-31
5. Selecting the Finishing
Making Copies
Chapter 3
To set Hole Punch, touch [Hole-Punch].
Touch [Enter].5
4003P348EA
6
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/3268/37504/w64_Minolta_Di450-73.png "Page 74
3-31
5. Selecting the Finishing
Making Copies
Chapter 3
To set Hole Punch, touch [Hole-Punch].
Touch [Enter].5
4003P348EA
6
Downloaded From ManualsPrinter.com Manuals")
3-28 5. Selecting the Finishing Making Copies Chapter 3 Crease makes a crease in the copy at its center before it is fed out. Sizes of paper that can be loaded: 11×17 L, Letter L Sizes of paper that can be loaded: 11×17 L, Legal L, Letter L Width 8-1/4 to 11-3/4 Length11to17Make sure to select the correct stapling function when making copies with the Crease function if you want to make a stapled copy set. Number of sheets : 2 to 15 NOTE Even if Staple is previously set to a corner or side position, the setting of Crease automatically cancels this setting and reselects a center stapling position. Touch the desired finishing function key and then touch [Folding]. Touch [Crease].Touch [2-Point Staple]. To u c h [ E n t e r ] . Folding 1155O039AA 1155O040AA 1 4003P039CA 2 4003P040CA 3 4003P341EA 4 Downloaded From ManualsPrinter.com Manuals
3-29 5. Selecting the Finishing Making Copies Chapter 3 Half-Fold folds the copy in two at its center with the copy surface on the outside. Sizes of paper that can be loaded: 11×17 L Sizes of paper that can be loaded: 11×17 L, Legal L Width10to11-3/4 Length 14-1/4 to 17 * The finished copy size has a length half that of the paper loaded in the machine.You can produce a document that looks like below by combining this function with Staple and Hole Punch. Number of sheets : 2 to 10 NOTES Half-Fold cannot be used if you make a copy from an original placed directly on the Original Glass. Even if Staple is previously set to a corner or center position, the setting of Half-Fold automatically cancels this setting and reselects a side stapling position. If the machine is loaded with paper of a standard size, Auto Size is automatically selected. If it is loaded with paper of a non-standard size, full size (×1.000) is automatically selected. Touch the desired finishing function key and then touch [Folding]. Touch [Half-Fold].To set Staple, touch [2-Point Staple]. To set Hole Punch, touch [Hole-Punch]. To u c h [ E n t e r ] . 1155O041AA Orig.Copy ex.)11 ×17 → Letter 1155O0640EA 1 4003P039CA 2 4003P042CA 3 4003P343EA 4 4003P344EA 5 Downloaded From ManualsPrinter.com Manuals
3-30 5. Selecting the Finishing Making Copies Chapter 3 Z-Fold folds the copy into three parts with the copy surface inside as shown below. Sizes of paper that can be loaded: 11×17L * The finished copy size has a length half that of the paper loaded in the machine.This feature comes in handy when you combine it with Staple and Hole Punch for filing. Number of sheets: Z-Fold only: 2 to 10 Z-Folded 5 sheets + unfolded 25 sheets NOTES When Z-Fold is selected, Auto Paper is automatically set. Z-Fold cannot be used if you make a copy from an original placed directly on the Original Glass. Even if control panel settings are made to make 2-sided copies from 1-sided originals, the copies to be Z-Folded will be 1-sided. If control panel settings are made to make 2-sided copies from 2-sided originals, the copies to be Z- Folded will be 2-sided. Whenever Z-Fold is set, the machine runs in the Mixed Original Detection mode. Even if Staple is previously set to a center position, the setting of Z-Fold automatically cancels this setting and reselects a side stapling position. Touch the desired finishing function key and then touch [Folding]. To u c h [ Z - F o l d ] .Touch [LTR] of Output Size. To set Staple, touch [Corner Staple] or [2- Point Staple]. 1155O043AA Orig.Copy ex.)11 ×17 → Letter 1155O642EA 1 4003P039CA 2 4003P045CA 3 4003P346EA 4 4003P347EA Downloaded From ManualsPrinter.com Manuals
3-31 5. Selecting the Finishing Making Copies Chapter 3 To set Hole Punch, touch [Hole-Punch]. Touch [Enter].5 4003P348EA 6 Downloaded From ManualsPrinter.com Manuals
3-32 5. Selecting the Finishing Making Copies Chapter 3 Loading the Originals Note the correct direction of the originals if the copies are to be stapled in the Staple Mode. Useful Tip Refer to the instruction labels on the machine or the Electronic Document Handler. Staple Panel Original Placement Corner Staple 2-Point Staple4002O136AC Stapling Position 1155O430AA 4002O137AC Stapling Position 1155O431AA Stapling Position 4002O138AC 1155O432AA 4002O139AC Stapling Position Panel Original Placement Corner Staple 2-Point Staple4002O140AC Stapling Position 1155O430AA 4002O141AC Stapling Position 1155O431AA 4002O142AC Stapling Position 1155O432AA 4002O143AC Stapling Position Downloaded From ManualsPrinter.com Manuals
3-33 5. Selecting the Finishing Making Copies Chapter 3 Note the correct direction of the originals if the copies are to be punched using Hole Punch. Hole Punch Panel Original Placement 1155O568EA 4002O291EB Punched Hole Position 1155O570EA 4002O292EB Punched Hole Position Panel Original Placement 1155O568EA Punched Hole Position 4002O293EB 1155O570EA Punched Hole Position 4002O290EB Downloaded From ManualsPrinter.com Manuals
3-34 5. Selecting the Finishing Making Copies Chapter 3 Auto Dual Function If a stapling sequence is attempted and the number of sheets is greater than the stapling capacity, Stapling is automatically canceled and the Finisher is set into the Sort or Group mode, sorting or grouping copies using the Auto Dual function (but no stapling action takes place). Though the Top Offset Tray can hold only up to 100 sheets, the Auto Dual function permits making copies of up to 2,600 sheets. Auto Dual Function in Stapling Auto Dual Function in Finishing Mode Paper SizeTop Offset Tr a yBottom Offset Tray Corner Staple 2-Point Staple Non-Sort Sort GroupLetterC 100 sheets 2500 sheets (no staple) LetterL 100 sheets 2000 sheets (no staple) 11 ×17L, LegalL 100 sheets 1500 sheets (no staple) 5-1/2 ×8-1/2 100 sheets - Crisscross SortLetter 100 sheets 1000 sheets (no staple) Staple Sort Group Corner11×17L to Letter - 100 sets or 1000 sheets - SideLetterC - - 200 sets or 2000 Sheets 11 ×17L, LegalL, LetterL- - 200 sets or 1000 Sheets Center11 ×17L, LetterL - - 100 sets or 1000 sheets Folding CreaseStaple11×17L, LetterL - - 100 sets or 1000 sheets Half- FoldNon-Sort, Sort, Group11×17L 10 sheets 50 sheets (no staple) Staple11 ×17L - - 100 sheets Z- FoldNon-Sort, Sort, Group11×17L 10 sheets 50 sheets (no staple) Staple11 ×17L - 100 sheets 100 sheets Mixed Orig. Detection Z-Folded + Unfolded*11 ×17L (Z-Folded) + LetterC *Z-Folded: 5 sheets/set Unfolded*: 25 sheets/set 30 sheetsZ-Folded: 100 sheets Z-Folded + Unfolded*: 1000 sheets (no staple) -Z-Folded: 100 sheets Z-Folded + Unfolded*: 1000 sheetsZ-Folded 100 sheets Z-Folded +Unfolded*: 2000 sheets Downloaded From ManualsPrinter.com Manuals
3-35 5. Selecting the Finishing Making Copies Chapter 3 *Only11×17L size paper can be Z-folded. Therefore, if a stack of mixed-size originals (11×17L and other sizes) is copied in Mixed Original Detection mode, the copy set will contain a mix of Z-folded and unfolded copies. NOTE When a Finisher FN-105, Finisher FN-106, or Mailbin Finisher is mounted, the Auto Dual function will not function. Note on Stapling When copies are made using the stapling function, the stapled copy sets may not be neatly stacked on the tray or may even fall off the tray unless certain conditions are met regarding the number of copies to be stapled and the number of copy sets to be made. Use the following table as guidelines when making copies. Paper SizeTop Offset Tr a yBottom Offset Tray Corner Staple 2-Point Staple Non-Sort Sort GroupLetterC 100 sheets 2500 sheets (no staple) LetterL 100 sheets 2000 sheets (no staple) 11 ×17L, LegalL 100 sheets 1500 sheets (no staple) 5-1/2 ×8-1/2 100 sheets - Crisscross SortLetter 100 sheets 1000 sheets (no staple) Staple Sort Group Corner11×17L to Letter - 100 sets or 1000 sheets - SideLetterC - - 200 sets or 2000 Sheets 11 ×17L, LegalL, LetterL- - 200 sets or 1000 Sheets Center11 ×17L to LetterL - - 100 sets or 1000 sheets Folding CreaseStaple11×17L to LetterL - - 100 sets or 1000 sheets Half- FoldNon-Sort, Sort, Group11×17L to LegalL 10 sheets 50 sheets (no staple) Staple11 ×17L to LegalL - - 100 sheets Z- FoldNon-Sort, Sort, Group11×17L 10 sheets 50 sheets (no staple) Staple11 ×17L - 100 sheets 100 sheets Mixed Orig. Detection Z-Folded + Unfolded*11 ×17L (Z-Folded) + LetterC *Z-Folded: 5 sheets/set Unfolded*: 25 sheets/set 30 sheetsZ-Folded: 100 sheets Z-Folded + Unfolded*: 1000 sheets (no staple) -Z-Folded: 100 sheets Z-Folded + Unfolded*: 1000 sheetsZ-Folded 100 sheets Z-Folded +Unfolded*: 2000 sheets No. of Copies StapledCopy Set Capacity When Finisher FN-105 is MountedWhen Finisher FN-106 is MountedWhen Mailbin Finisher is Mounted 11×17 L to Letter 11×17 L to Letter 11×17 L to Letter 2 copies 100 sets 100 sets 200 sets 3to5copies 80sets 80sets 150sets 6to10copies 60sets 60sets 100sets 11 to 20 copies 40 sets 40 sets 50 sets 21 to 30 copies 60 sets 33 sets 33 sets 31 to 40 copies 60 sets - 25 sets 41 to 50 copies 60 sets - 20 sets Downloaded From ManualsPrinter.com Manuals
3-36 Making Copies Chapter 3 6. Selecting the Original Copy Type When you touch [Orig. Copy] on the Touch Panel, a screen appears that allows you to set the orig. copy type. Original Copy Types 4002P220AA Single-Sided Single-Sided This setting allows you to make 1-sided copies from originals.Double-Sided Single-Sided This setting allows you to make 1-sided copies from originals. 4002P221AA Orig. Copy Orig. Copy 4002P222AA Single-Sided Double-Sided This setting allows you to make 2-sided copies from originals.Double-Sided Double-Sided This setting allows you to make 2-sided copies from originals. 4002P223AA Orig. Copy Orig. Copy 4002P224AA Single-Sided Single-[2in1] Select Single-Sided Single-[2in1] to make a 1-sided copy, through reduction, from two originals side-by-side. Double-Sided Single-[2in1] Select Double-Sided Single-[2in1] to make a 1- sided copy, through reduction, from originals side- by-side. 4002P225AA Orig. CopyOrig. Copy 4002P226AA Single-Sided Double-[2in1] Select Single-Sided Double-[2in1] to make a 2-sided copy, through reduction, from four originals side-by-side. Double-Sided Double-[2in1] Select Double-Sided Double-[2in1] to make a 2- sided copy, through reduction, from two originals side-by-side. 4002P227AA Orig. Copy Orig.Copy Downloaded From ManualsPrinter.com Manuals
3-37 6. Selecting the Original Copy Type Making Copies Chapter 3 4002P228AA Single-Sided Single-[4in1] Select Single-Sided Single-[4in1] to make a 1-sided copy, through reduction, from four originals side-by-side. Double-Sided Single-[4in1] Select Double-Sided Single-[4in1] to make a 1- sided copy, through reduction, from two originals side-by-side. 4002P229AA Orig. Copy Orig.Copy 4002P230AA Single-Sided Double-[4in1] Select Single-Sided Double-[4in1] to make a 2-sided copy, through reduction, from eight originals side-by-side. Double-Sided Double-[4in1] Select Double-Sided Double-[4in1] to make a 2- sided copy, through reduction, from four originals side-by-side. 4002P231AA Orig. Copy Orig.Copy 4002P232AA Single-Sided Booklet Creation Select Single-Sided Booklet Creation to make a 2-sided copy, through reduction, from four originals side-by-side. Double-Sided Booklet Creation Select Double-Sided Booklet Creation to make a 2-sided copy, through reduction, from two originals side-by-side. 4002P233AA Orig. Copy Orig.Copy 4002P234AA Book Single-Sided Select Book Single-Sided to make 1-sided page-by-page copies of an open book. Book Double-Sided Select Book Double-Sided to make a 2-sided copy of an open book. 4002P235AA Orig. Copy Orig.Copy Downloaded From ManualsPrinter.com Manuals