Home > Minolta > Printer > Minolta Di450 User Manual

Minolta Di450 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Minolta Di450 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 7 Minolta manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							3-68
    Making Copies
    Chapter 3
    10. Selecting the Job Functions
    Memory Recall
    Touching [Memory Recall] on the Touch Panel after a copy cycle has been completed will allow you to
    make a copy using the previous image data and copying mode without having to reload the original.
    Touch [Memory Recall].
    Press the Start key, and the machine starts
    the print cycle.
    NOTES
     Memory Recall available from User’s Choice
    must be turned ON to use this function.
    p.5-13
     This function cannot be used in the Interrupt
    mode.
     The preceding image data and copy settings are
    cleared to disable Memory Recall when any of
    the following operations is performed.
    The machine is turned OFF.
    The machine scans a new original or the Start
    key is pressed.
    The Access key or Interrupt key is pressed, or
    [Reserve] is touched.
    The Clear key or Panel Reset key is pressed
    while the machine remains idle.
    Useful Tips
     After you have made copies from a confidential
    document, it is recommended that you press the
    Panel Reset key to erase the data.
     To change the number of copies to be made,
    press the Clear key and set the new number.
     The paper size and paper direction cannot be
    changed.
    Setting Memory Recall
    1
    4003P120CA
    2
    4003P121CA
    Downloaded From ManualsPrinter.com Manuals 
    						
    							3-69
    10. Selecting the Job Functions
    Making Copies
    Chapter 3
    Reserve
    
    *As the machine completes scanning for a regular copy job, it is capable of scanning for another job
    which is held in reserve.
    When the machine completes the copy cycle for the first job, it automatically starts the copy cycle for the
    reserved job.
    By job, we mean a sequence of operation from original loading to the end of the copy cycle.
    NOTE
    Reserve is disabled if the machine is equipped with the optional Plug-In Counter.
    Touch [Reserve] on the Touch Panel.
    Load the originals and make the necessary
    settings.
    Press the Start key, and the machine starts
    scanning the originals and the job is
    reserved.
    NOTES
     The number of copying jobs that can be stored
    is a maximum of 5 or about 2000 sheets of
    Letter standard original.
     Jobs are copied in order of reservation.
     For a job to be reserved, Manual Bypass cannot
    be selected.
    Reserving a Job
    1
    4003P122CA
    2
    4003P123CA
    3
    Downloaded From ManualsPrinter.com Manuals 
    						
    							3-70
    10. Selecting the Job Functions
    Making Copies
    Chapter 3
    Job List
    The Job List key on the control panel offers several convenient functions that are nice to use.
    Mode Check allows you to check what settings
    have been made for a job.
    Touch [Mode Check] and then touch the job
    no. key whose settings are to be checked.
    Check the specific details of the settings
    made and then touch [Exit].Change allows you to change the settings made for
    ajob.
    Touch [Change] and then touch the job no.
    key whose settings are to be changed.
    Change the number of copies to be made
    using the 10-Key Pad and then touch [Enter].
    Mode Check
    1
    4003P124CA
    2
    4003P125CA
    Change
    1
    4003P126CA
    2
    4003P127CB
    Downloaded From ManualsPrinter.com Manuals 
    						
    							3-71
    10. Selecting the Job Functions
    Making Copies
    Chapter 3
    Delete allows you to delete a job previously set.
    
    Touch [Delete].
    Touchthejobno.keytobedeleted.
    Touch [Yes].
    Touch [Exit].
    Press the Stop key while the job in queue is
    being scanned or printed.
    Touch [Delete Printing Job] or [Delete
    Scanning Job].
    Useful Tip
    Pressing the Stop key stops the scanning or
    printing action being performed.
    Press the Start key.
    Delete
    1
    4003P128CA
    2
    4003P129CA
    3
    4003P130CA
    41
    4002O314CA
    2
    4003P131CA
    3
    Downloaded From ManualsPrinter.com Manuals 
    						
    							3-72
    10. Selecting the Job Functions
    Making Copies
    Chapter 3
    A confidential document transmitted by a personal
    computer is unlocked when a password is entered,
    putting it in the print queue.
    To u c h [ N e x t ] .
    To u c h [ U n l o c k ] .
    Enter a 4-digit password from the 10-Key
    Pad.
    NOTE
    All jobs are unlocked if the previously
    programmed password matches the password
    entered.The status of that particular job changes to
    “Wait.”
    Useful Tip
    An unlocked job is placed at the end of the jobs
    on the print queue.
    Touch [Exit].
    Unlock
    1
    4003P133CB
    2
    4003P134CB
    3
    4003P135CA
    4
    4003P136CB
    5
    Downloaded From ManualsPrinter.com Manuals 
    						
    							4-1
    Typical Function Combinations
    Chapter 4
    Chapter 4
    Typical Function Combinations
    Downloaded From ManualsPrinter.com Manuals 
    						
    							4-2
    Typical Function Combinations
    Chapter 4
    1. Making Different Types of Copy
    These pages explain how to combine different functions to make various types of copy.
    Reading the Table
    1. Shows whether the copy is 1-sided or 2-sided.
    2. Shows what type of copy you want to make.
    3. Shows how to load your original.p. 3-4
    4. Shows which to set, either Single-Sided, Double-Sided, 2in1, or 4in1 for Original Copy.p. 3-36
    5. Shows which to set, either Corner Staple, 2-Point Staple, or Hole-Punch for the finishing function.
    p. 3-20
    6. Shows the margin position to be set for your original.p. 3-39
    7. Shows the file margin function to be set as an auxiliary function.p. 3-54
    8. Shows that the stapling position or hole punch positions must be set using the Select Position key.
    p. 3-24, 3-25
    * The marker “-” in the table indicates that no key setting is necessary.Intended Type of CopyLoading the
    OriginalsCopyFinishing
    FunctionsMarginFile
    MarginSelect
    Position
    2-Sided
    Double-
    Sided
    Corner
    Staple
    Double-
    SidedHole Punch
    2-Point
    Staple
    1
    2
    3
    Turn over
    2
    3
    1
    Tu r n ov e r
    23456781
    
    Downloaded From ManualsPrinter.com Manuals 
    						
    							4-3
    Typical Function Combinations
    Chapter 4
    2. Using 1-Sided Originals
    Making 1-Sided Copies from 1-Sided Originals
    Intended Type of CopyLoading the
    OriginalsCopyFinishing
    FunctionsMarginFile
    MarginSelect
    Position
    1-Sided
    Single-
    Sided
    Corner
    Staple
    Single-
    Sided
    Corner
    Staple
    Single-
    SidedHole Punch
    2-Point
    Staple
    Single-
    SidedHole Punch
    2-Point
    Staple
    Single-
    Sided
    Corner
    Staple
    Single-
    Sided
    Corner
    Staple
    Single-
    SidedHole Punch
    2-Point
    Staple
    Single-
    SidedHole Punch
    2-Point
    Staple
    21
    Turn over
    12
    Tu r n ov e r
    21
    Turn over
    21
    Tu r n ov e r
    12
    Turn over
    12
    Tu r n o ve r
    21
    Tu r n ov e r
    21
    Tu r n o ve r
    Downloaded From ManualsPrinter.com Manuals 
    						
    							4-4
    2. Using 1-Sided Originals
    Typical Function Combinations
    Chapter 4
    Intended Type of CopyLoading the
    OriginalsCopyFinishing
    FunctionsMarginFile
    MarginSelect
    Position
    1-Sided
    Single-
    [2in1]
    Corner
    Staple
    Single-
    [2in1]
    Corner
    Staple
    Single-
    [2in1]Hole Punch
    2-Point
    Staple
    Single-
    [2in1]Hole Punch
    2-Point
    Staple
    Single-
    [2in1]
    Corner
    Staple
    Single-
    [2in1]
    Corner
    Staple
    Single-
    [2in1]Hole Punch
    2-Point
    Staple
    Single-
    [2in1]Hole Punch
    2-Point
    Staple1234
    Tu r n ov e r
    1234
    Tu r n ov e r
    3412
    Turn over
    1234
    Turn over
    1
    23
    4
    Turn over
    1
    23
    4
    Tu r n o ve r
    3
    41
    2
    Tu r n ov e r
    1
    23
    4
    Tu r n ov e r
    Downloaded From ManualsPrinter.com Manuals 
    						
    							4-5
    2. Using 1-Sided Originals
    Typical Function Combinations
    Chapter 4
    Intended Type of CopyLoading the
    OriginalsCopyFinishing
    FunctionsMarginFile
    MarginSelect
    Position
    1-Sided
    Single-
    [4in1]
    Corner
    Staple
    Single-
    [4in1]
    Corner
    Staple
    Single-
    [4in1]Hole Punch
    2-Point
    Staple
    Single-
    [4in1]Hole Punch
    2-Point
    Staple
    Single-
    [4in1]
    Corner
    Staple
    Single-
    [4in1]
    Corner
    Staple
    Single-
    [4in1]Hole Punch
    2-Point
    Staple
    Single-
    [4in1]Hole Punch
    2-Point
    Staple12
    3456
    78
    Tu r n ov e r
    12
    3456
    78
    Turn over
    56
    7812
    34
    Turn over
    56
    7812
    34
    Turn over
    12
    3456
    78
    Tu r n o ve r
    12
    3456
    78
    Tu r n ov e r
    56
    7812
    34
    Tu r n ov e r
    56
    7812
    34
    Tu r n ov e r
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Minolta manuals Comments (0)

    Related Manuals for Minolta Di450 User Manual