Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual
Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual
Have a look at the manual Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
What’s New in DEFINITY ECS Release 8.2 Job Aid 555-233-754 Issue 1 April 2000 Networking Enhancements 225 Networking - ATM 2 11.Set the synchronizationSet the Synchronization Capable field to n (default). NOTE: Up to 44 b oards may b e d esignated sync hronization c ap ab le on R8r and 3 b oard s on R8si, R8c si, R8c. If you enter y in this field when the maximum numb er of b oard s has been d esignated , the system returns: Maximum number of Synchronization Capable boards already administered NOTE: If this ATM trunk c ircuit p ack is a synchronization sourc e, set the field to y. If you c hang e the field to n when the circ uit p ac k is ad ministered as a sync hronization sourc e, the system returns: Cannot remove synchronization source. 12.Administer the signaling groupType add signaling-group and press Enter. The Signaling Group screen (Screen 7 ) displays. Set the following fields (tabbing goes vertically) 13.Set the group type Set the Group Type field to atm. 14.Type port address Type the D-channel (signaling channel) port address for this new signaling group in UUCSSppp screen at (3-digits required for port addresses). This address must match the slot and port number on an ATM-Interface circuit pack. 15.Type a name Type a name in the Name field (15 alpha-numeric characters). 16.Set VPI The Virtual Path Identifier (VPI) field is set to 0 and is not administrable. Table 9. ATM-CES administration — Continued ÖStep Action Description Continued on next page
What’s New in DEFINITY ECS Release 8.2 Job Aid 555-233-754 Issue 1 April 2000 Networking Enhancements 226 Networking - ATM 2 17.Set VCI Set the Virtual Channel Identifier (VCI) field (32- 1023). This number must be unique among signaling groups that share the same ATM circuit pack. NOTE: For a d irec t c onnec tion (two fib er-connec ted CES circuit p acks), sp ecify the same VCI at b oth end s of the emulated c irc uit. When the CES is connected to an ATM switch, the VCI spec ified here must matc h the VCI used for the PVC c reated on the ATM switc h, whic h is typ ically provided by the ATM switch ad ministrator. NOTE: The Signaling Mode field is set to isdn-pri and is not ad ministrab le. 18.Set idle code Set the Idle Code field (typically 11111111). 19.Set interface compandingSet the Interface Companding field (alaw or mulaw). Once administered, busyout the signaling group before changing. 20.Set country protocol Set the Country Protocol field (Table 10). 21.Set protocol version Set the Protocol Version field (Table 10). 22.Set circuit type Set the Circuit Type field (T1 or E1). NOTE: Both end s must be the same. It is p referab le to set it to E1 even in the United States, Canad a, or other T1 countries. 23.Set connect Set the Connect field to pbx. Once administered, busyout the signaling group before changing. 24.Set interface Set the Interface field to user at one end of the emulated circuit and to network at the other end. 25.Set DCP/analog bearer capabilitySet the DCP/Analog Bearer Capability field to 3.1 kHz. 26.Set internetworking messageSet internetworking message field to PROGress. Table 9. ATM-CES administration — Continued ÖStep Action Description Continued on next page
What’s New in DEFINITY ECS Release 8.2 Job Aid 555-233-754 Issue 1 April 2000 Networking Enhancements 227 Networking - ATM 2 27.Verify channel settingsGo to screen 2; Screen 8 displays. Depending on the settings in step 18: nIf Circuit Type field is set at T1, then channel 24 is populated. nIf Circuit Type field is set at E1, then channel 16 is populated. Other details about D-channels: nAll ports for one signaling group must be on the same ATM circuit pack (the same circuit pack that the D channel is on). nThe D-channel port is never assigned to a trunk group. Because they are all the same, the administrator does not need to type in the circuit pack location for each channel. nNo port can be assigned to more than one signaling group. 28.Type port numbers Add the port numbers (minimum of 6) from the port-to- channel mapping on signaling group screen 2. See “ Changing the port-to-channel mapping” on page 233 if you need to change any administration. When finished, press En t e r to save the administration. 29.Administer the trunk groupType add trunk-group trkgrpnbr and press En te r. Screen 9 displays. Table 9. ATM-CES administration — Continued ÖStep Action Description Continued on next page
What’s New in DEFINITY ECS
Release 8.2 Job Aid 555-233-754 Issue 1
April 2000
Networking Enhancements
228 Networking - ATM
2
ATM-CES administration screens
NOTE:
The screens shown in this section are as they look on a Release 8r platform
through a SAT. Your interface and screen page numbers may differ.
Screen 2. Optional features—screen 1
30.Set final fields Set the following fields (tabbing goes horizontally):
nGroup Type: field to isdn.
NOTE:
A trunk g roup c an c ontain either ISDN or ATM
trunks, b ut not b oth.
nThe CDR Reports field defaults to y.
nThe Carrier Medium: field to AT M.
nThe TAC: field to match customer’s dial plan.
nThe Dial Access? field defaults to n.
nThe Service Type: field to tie.
Go to screen 6 and add the channel-to-port mapping
(Screen 11
). You must have the same number of entries as
port numbers in step 28.
Press
En t e r to save the changes.
31.Save translations Type save translation and press En te r.
Table 9. ATM-CES administration — Continued
ÖStep Action Description
Continued on next page
change system-parameters customer-options Page 1 of 6
OPTIONAL FEATURES
G3 Version: V8 Maximum Ports: 300
Location: 1 Maximum XMOBILE Stations: 0
Maximum H.323 Trunks: 0
Maximum H.323 Stations: 0
Maximum IP SoftPhones: 0
What’s New in DEFINITY ECS
Release 8.2 Job Aid 555-233-754 Issue 1
April 2000
Networking Enhancements
229 Networking - ATM
2
Screen 3. Optional features—screen 2
Screen 4. Optional features—screen 3
change system-parameters customer-options Page 2 of 6
OPTIONAL FEATURES
Abbreviated Dialing Enhanced List? y CAS Branch? y
Access Security Gateway (ASG)? y CAS Main? y
Analog Trunk Incoming Call ID? y Change COR by FAC? n
A/D Grp/Sys List Dialing Start at 01? y Cvg Of Calls Redirected Off-net? y
Answer Supervision by Call Classifier? y DCS (Basic)? y
ARS? y DCS Call Coverage? y
ARS/AAR Partitioning? y DCS with Rerouting? y
ARS/AAR Shortcut Dialing? n DEFINITY Network Admin? y
Digital Loss Plan Modification? n
ASAI Proprietary Adjunct Links? y DS1 MSP? y
Async. Transfer Mode (ATM) PNC? y Emergency Access to Attendant? y
Async. Transfer Mode (ATM) Trunking? y Extended Cvg/Fwd Admin? y
ATMS? y External Device Alarm Admin? y
Attendant Vectoring? n Flexible Billing? y
Audible Message Waiting? y Forced Entry of Account Codes? y
Authorization Codes? y Global Call Classification? y
(NOTE: You must logoff & login to effect the permission changes.)
change system-parameters customer-options Page 3 of 6
OPTIONAL FEATURES
Hospitality (Basic)? y PNC Duplication? y
Hospitality (G3V3 Enhancements)? y
H.323 Trunks? n Processor and System MSP? y
IP Stations? n Private Networking? y
ISDN Feature Plus? y Restrict Call Forward Off Net? y
ISDN-BRI Trunks? y Secondary Data Module? y
ISDN-PRI? y Station and Trunk MSP? y
Malicious Call Trace? y
Mode Code for Centralized Voice Mail? n Tenant Partitioning? y
Mode Code Interface? y Terminal Trans. Init. (TTI)? y
Multifrequency Signaling? y Time of Day Routing? y
Multimedia Appl. Server Interface (MASI)? y Uniform Dialing Plan? y
Multimedia Call Handling (Basic)? y Usage Allocation Enhancements? y
Multimedia Call Handling (Enhanced)? y
Multiple Locations? y Wideband Switching? y
Personal Station Access (PSA)? y Wireless? y
(NOTE: You must logoff & login to effect the permission changes.)
What’s New in DEFINITY ECS
Release 8.2 Job Aid 555-233-754 Issue 1
April 2000
Networking Enhancements
230 Networking - ATM
2
Screen 5. Duplication related system parameters
Screen 6. ATM trunk board
Screen 7. Signaling group
change system-parameters duplication Page 1 of 1 SPE B
DUPLICATION RELATED SYSTEM PARAMETERS
Enable Operation of SPE Duplication? y
Enable Operation of PNC Duplication? y
ATM TRUNK-BOARD
Location: 2E08
Name: _______________ Synchronization Capable: 1
add signaling-group Page 1 of 6
SIGNALING GROUP
Group Number: 2 Group Type: atm Name:
Max number of NCA TSC: 0
D-Channel: Max number of CA TSC: 0
Trunk Group for NCA TSC:
Trunk Group for Channel Selection:
Supplementary Service Protocol: a
CIRCUIT PARAMETERS
Virtual Path Identifier: 0
Virtual Channel Identifier:
Signaling Mode: isdn-pri Circuit Type: T1
Idle Code: 11111111 Connect: pbx
Interface Companding: mulaw
Country Protocol: 1
Protocol Version: a
DCP/Analog Bearer Capability: 3.1kHz
Interworking Message: PROGress
What’s New in DEFINITY ECS Release 8.2 Job Aid 555-233-754 Issue 1 April 2000 Networking Enhancements 231 Networking - ATM 2 Table 10. Country and protocol version supported (for Screen 7) Value Country Protocol supported 1-a United States, Canada AT&T TR41449/41459 (tested with AT&T, Canadian, and MCI networks) 1-b United States Bellcore TR 1268; NIUF.302; ANSI T1.607 2 Australia AUSTEL TSO14.1; Telecom Australia TPH 1856 3 Japan NTT INIS-NET 4 Italy ETS 300 102 5 Netherlands ETS 300 102 6 Singapore ETS 300 102 7 Mexico ETS 300 102 8 Belgium ETS 300 102 9 Saudi Arabia ETS 300 102 10-a United Kingdom ETS 300 102 (for connection to DASS II/DPNSS through external converter) 10-b United Kingdom ETS 300 102 (Mercury) British Telecom ISDN 30 11 Spain Telefonica ISDN Specification 12-a France VN4 (French National PRI) 12-b France ETS 300 102 modified according to P10-20, called Euronumeris Argentina ETS 300 102 Brazil ETS 300 102 China ETS 300 102 Germany ETS 300 102 Hong Kong ETS 300 102 South Korea ETS 300 102 New Zealand ETS 300 102 Continued on next page
What’s New in DEFINITY ECS
Release 8.2 Job Aid 555-233-754 Issue 1
April 2000
Networking Enhancements
232 Networking - ATM
2
Screen 8. Signaling group D-channel assignments—screen 2
Screen 9. Trunk group—screen 1
add signaling-group next Page 2 of 6
SIGNALING GROUP
Chan Port Chan Port
__1: ___ _17: ___
__2: ___ _18: ___
__3: ___ _19: ___
__4: ___ _20: ___
__5: ___ _21: ___
__6: ___ _22: ___
__7: ___ _23: ___
__8: ___ _24: 0cc (T1 only)
__9: ___
_10: ___
_11: ___
_12: ___
_13: ___
_14: ___
_15: ___
_16: Occ (E1 only)
add trunk-group Page 1 of 10
TRUNK GROUP
Group Number: 1 Group Type: isdn CDR Reports: y
Group Name: OUTSIDE CALL COR: 1 TN: 1 TAC:
Direction: two-way Outgoing Display? n Carrier Medium: ATM
Dial Access? n Busy Threshold: 99 Night Service:
Queue Length: 0
Service Type: tie Auth Code? n TestCall ITC: rest
Far End Test Line No:
TestCall BCC: 4
TRUNK PARAMETERS
Codeset to Send Display: 6 Codeset to Send National IEs: 6
Max Message Size to Send: 260 Charge Advice: none
Supplementary Service Protocol: a Digit Handling (in/out): enbloc/enbloc
Trunk Hunt: cyclical QSIG Value-Added Lucent? n
Digital Loss Group: 13
Calling Number - Delete: Insert: Numbering Format:
Bit Rate: 1200 Synchronization: async Duplex: full
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 0
What’s New in DEFINITY ECS
Release 8.2 Job Aid 555-233-754 Issue 1
April 2000
Networking Enhancements
233 Networking - ATM
2
Screen 10. Trunk group—screen 4
Changing the port-to-channel mapping
Use the following steps to change the port-to-channel mapping for emulated
circuits:
1. Type busyout atm signaling-group
siggrpnbr and press En te r to busyout
the signaling group.
2. Type change trunk-group
trkgrpnbr and press En t e r.
Remove any p ort ad ministration on sc reen 6.
3. Type change signaling-group
siggrpnbr.
Mod ify the p ort-to-c hannel map p ing .
4. Type change trunk-group
trkgrpnbr and press En t e r.
Ad d the p orts bac k in on sc reen 6, using new p ort numb ers, if d esired.
5. Type release atm signaling-group
siggrpnbr and press En te r to release
the signaling group.
The d isp lay shows the c ommand ab orts, b ut the D-c hannel and B-
channels come up.
add trunk-group Page 4 of 10
TRUNK GROUP
Administered Members (min/max): 0/0
GROUP MEMBER ASSIGNMENTS Total Administered Members: 0
Port Code Sfx Name Night Sig Grp
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
What’s New in DEFINITY ECS Release 8.2 Job Aid 555-233-754 Issue 1 April 2000 Networking Enhancements 234 Networking - ATM 2 DEFINITY commands for CES Administration commands that are useful in working with CES are listed in Ta b l e 11. Additional DEFINITY ECS administration After administering the ATM-PNC or ATM-CES, you may need to do some further administration, specifically: nLocations nSVC cache (PNC only) nGain/Loss adjustments (PNC only) Locations The DEFINITY ATM-PNC makes it easier for the DEFINITY ECS to have port networks in multiple time zones. To handle distances between the PPN and its EPNs, the system tracks one or more locations by assigning each cabinet a location number. All locations must be in the same country code. If upgrading from a pre-Release 7, you may need to set the locations for your EPNs. To administer locations, follow the procedure in Ta b l e 1 2 . NOTE: The screens and field description follow the table. Table 11. ATM administration commands Command Description display circuit-packs cabinet Displays the packs in the cabinet, identifying ATM Trunk as well as ATM PNC EI boards. ATM Interface boards have not been specified as CES or PNC yet. display atm ports eqloc Displays the 256 ports on the ATM board with the corresponding signaling and trunk group. list configuration atmLists the ATM boards, identifying equipment location, board code, type, and vintage. list configuration trunksLists boards identifying assigned ports. Although the ATM board is listed, the 256 ports are not.