Lucent Technologies GuestWorks Issue 6 Technician Handbook

Translations and Testing 
81 Connecting the Hospitality Adjuncts 
GuestWorks Issue 6 Technician Handbook  555-231-109  Issue 1
April 2000
Translations and Testing
The following sections contain translations and testing required to successfully 
administer the GuestWorks, the INTUITY Lodging Voice Messaging, and the 
INTUITY Lodging Call Accounting. Only the most important fields are highlighted 
with either required or suggested translations. Unless specified otherwise, the 
defaults provided are...

GuestWorks Issue 6 Technician Handbook  555-231-109  Issue 1
April 2000
Translations and Testing 
82 Checklist 
Checklist
Ta b l e 9 is a high-level checklist of the tasks required to translate a GuestWorks 
system including the switch and the INTUITY system.
!CAUTION:
Before doing any translations, make sure that the default translation card is 
in the system. Unless instructed otherwise, you must always use the default 
translation card.
Table 9. Translation Checklist
4ProcedureBegins 
on...
Initial...

GuestWorks Issue 6 Technician Handbook  555-231-109  Issue 1
April 2000
Translations and Testing 
83 Miscellaneous Translations 
Miscellaneous Translations
Ta b l e 1 0 is a checklist of the miscellaneous translations that must be done before 
you administer the links to the GuestWorks adjuncts.
Table 10. Checklist for Miscellaneous Translations
4ProcedureBegins 
on...
Time of day and date on the INTUITY system Page 84
Switch special applications Page 85
Dial plan on the switch Page 86
Dial plan on the...

GuestWorks Issue 6 Technician Handbook  555-231-109  Issue 1
April 2000
Translations and Testing 
84 Miscellaneous Translations 
Time of Day and Date (INTUITY)
For R4.4, use the Customer/Services Administration, System Management, 
UNIX® Management, UNIX Date and Time command to set the time and date on 
the INTUITY system. For R5, use the UNIX Management, UNIX Date and Time 
command.
The switch time of day and date should already be set. See Pa ge 2 0
 for 
information about setting the time of day and...

GuestWorks Issue 6 Technician Handbook  555-231-109  Issue 1
April 2000
Translations and Testing 
85 Miscellaneous Translations 
Dial by Name Special Application (Switch)
Use the display system-parameters special-applications command to verify 
that the Dial by Name feature has been enabled. The default is y since Dial by 
Name is a free feature for GuestWorks. If the feature has not been enabled, call 
the technical support organization (or your COE) and have them dial in and 
enable the feature....

GuestWorks Issue 6 Technician Handbook  555-231-109  Issue 1
April 2000
Translations and Testing 
86 Miscellaneous Translations 
Dial Plan (Switch)
Use the change dialplan command to administer the switch dial plan based on 
the customer’s requirements. The Local Node Number must be set to 1. For 
more information about the Dial Plan feature, see 
DEFINITY ECS Release 8 
Administrator’s Guide
.
NOTE:
The PMS interface supports 3-, 4-, or 5-digit extensions, but be aware that 
prefixed extensions do not...

GuestWorks Issue 6 Technician Handbook  555-231-109  Issue 1
April 2000
Translations and Testing 
87 Miscellaneous Translations 
Dial Plan (INTUITY)
The change machine command identifies the range of mailboxes that can be 
activated by the INTUITY system. This is part of the AUDIX Administration menu 
and must be administered to match the switch’s dial plan.
If you change the Extension Length field, you must stop and restart the voice 
system. To stop the voice system, use the path Customer/Services...

GuestWorks Issue 6 Technician Handbook  555-231-109  Issue 1
April 2000
Translations and Testing 
88 Miscellaneous Translations 
Feature Access Codes (Switch)
The change feature-access-codes command is used to assign the switch fea-
ture access codes. Unless the customer requests a feature or a feature is needed 
for maintenance personnel, do not assign a feature access code for features not 
being used. There are no default feature access codes.
change feature-access-codes...

GuestWorks Issue 6 Technician Handbook  555-231-109  Issue 1
April 2000
Translations and Testing 
89 Miscellaneous Translations 
change feature-access-codes                                     Page   3 of  5
                               FEATURE ACCESS CODE (FAC)
Refresh Terminal Parameters Access Code:
Remote Send All Calls Activation: Deactivation:
Self Station Display Activation:
                     Send All Calls Activation:  Deactivation: 
Station Security Code Change Access Code:
Station User...

GuestWorks Issue 6 Technician Handbook  555-231-109  Issue 1
April 2000
Translations and Testing 
90 Miscellaneous Translations 
change feature-access-codes                                     Page  5 of  5
                               FEATURE ACCESS CODE (FAC)
                                 Hospitality Features
               Automatic Wakeup Call Access Code: 
   Housekeeping Status (Client Room) Access Code: 
   Housekeeping Status (Client Room) Access Code: 
   Housekeeping Status (Client Room)...