Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install Telecommunications Cabling 
2-13 Label the Main Distribution Frame 
2
Label the Main Distribution Frame
Fi g u re  2 - 6 shows the g rap hic  symb ols used  on lab els for the system, 
c ross-c onnec tions, information outlets, and  c ab les. The lab els are c olor-c od ed  to 
id entify system wiring :
nGreen — To Central Offic e (CO)
nPu r p le  — To system p...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install Telecommunications Cabling 
2-14 Label the Main Distribution Frame 
2 

Accessing and Activating the System 
3-1  
3
DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
3
Accessing and Activating the System
This c hapter c ontains p roc ed ures for installing the manag ement terminal and  
b ring ing  the system up  to a “ no red  LEDs”  state. This c hap ter details how to:
nAc cess the System
nAc tivate the System
nPower Up  the System
nUse Sc reens and  Command s
nAd minister the System...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-2 Access the System 
3
Access the System
To administer the DEFINITY ECS, you must be ab le to ac c ess the system. With 
Release 7 and  later, the DEFINITY ECS no long er req uires a d ed ic ated  
manag ement terminal, known as a system ad ministration terminal, or SAT. 
Personal c omp uters and  tec hnic ian lap top s eq uip p ed...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-3 Access the System 
3
To install DSA on your c omp uter, p lac e the DSA CD in the CD-ROM d rive and  
follow the installation instructions. To start DSA or DNA, click on Start > 
Programs > DEFINITY Site Administration
. 
DSA sup p orts SAT emulation, whic h is d irec tly eq uivalent to using  the SAT (see 
Fi g u re  3 - 1
). DSA...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-4 Access the System 
3
Figure 3-1. Typical DSA screen in SAT emulation mode
Figure 3-2. Typical DSA screen in GEDI mode 

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-5 Access the System 
3
Connecting a PC
You c an c onnec t your PC or lap top  to the DEFINITY ECS R8si/R8c si/R8r either 
d irec tly (50 ft [ 15 m]  or less) or remotely throug h a d ata mod ule or a mod em. 
Connecting directly to the DEFINITY ECS
You c an c onnec t d irec tly from the PC if it is 50 ft (15 m) or less from the...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-6 Access the System 
3
Connecting remotely to the DEFINITY ECS
To c onnec t remotely to the system, you need  one of the following  p iec es of 
hard ware:
nConnec ting  throug h a data mod ule
nConnec ting  b y analog  mod em to INADS p ort
Connecting through a data module
If more than 50 ft (15 m) from the DEFINITY ECS, you c an c...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-7 Access the System 
3
Figure 3-4. A typical remote connection using an 8400B (top) or 7400B 
(bottom) data module
NOTE:
With a 7400A or 7400B+  data mod ule, use a 4-wire d ig ital line c irc uit p ac k. 
With the 8400B+  d ata mod ule, use a 2-wire d igital line c irc uit p ac k.
In p lac e of a 7400B+  d ata mod ule, you c an use...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-8 Access the System 
3
Setting the Data Module to DCE Mode
1. Cyc le the p ower to the d ata mod ule. The unit p erforms a self test and  
displays its operating mode.
2. Observe the d isp lay.
a. If the d isp lay reads DCE mod e, p roc eed  to the next sec tion.
b . If the d isp lay reads DTE mod e, c omp lete the following  step...