Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-19 Administer the System 
3
Set Country Options
Certain c ountry options need  to b e set to turn red  failure ind ic ation LEDs off. 
Refer to Ta b l e  3 - 5
 for a list of c ountry c od es.
1. Verify the sc reen d isp lays command:
2. Type change system-parameters country options 
and press 
En te r.
A sc reen similar to Sc reen...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-20 Administer the System 
3
3. The d efault c omp and ing  mode is mu-Law. If the c ountry uses A-Law 
c omp and ing , typ e A-Law. Press 
En te r when this information is c orrec t.
Other items eventually need  to b e entered  on this sc reen, b ut this is all that 
must b e d one to turn the red  alarm LEDs off.
4. If all red...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-21 Administer the System 
3
Change Craft Password
The p assword  for the c raft log in must be changed b y the installing  tec hnic ian to 
p revent unauthorized  ad ministration c hang es.
!CAUTION:
After the password is changed, the new password must be safeguarded so 
no unauthorized  ad ministration c hang es c an b e mad e....

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-22 Administer the System 
3
5. Enter new p assword . Valid  p assword s c onsist of a c omb ination of from 
four to eleven alp ha or numeric  c harac ters. At least one letter and  one 
numb er must be used  in eac h password .
6. Press 
En te r. The c ursor is p ositioned  on Reenter Login’s Password
:.
7. Type new password again...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-23 Administer the System 
3
Set Date and Time
1. Type set time 
and 
press En t e r.
.
Screen 3-5. Typical Date and Time Screen
2. Typ e the d ay of the week in Eng lish (Sunday throug h Saturd ay) and  press 
TA B to move to next field . See Tab le 3-6 for Eng lish day of the week names.
3. The c ursor is p ositioned  on the...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-24 Administer the System 
3
4. The c ursor is p ositioned  on the Day of the Month:
 field . Typ e the d ay 
of month (1 through 31) and  p ress 
TA B to move to the next field .
5. The c ursor is p ositioned  on the Year:
 field . Typ e the c urrent year and  
p ress 
Ta b to move to the next field .
6. The c ursor is p ositioned...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-25 Administer the System 
3
11. Verify the sc reen d isp lays:
command successfully completed
command:
12. Typ e display time
, and  p ress 
En t e r to verify d ate/time d ata.
Table 3-8. Conversion to 24-Hour Clock
Standard Time Standard Time
12-Hour 24-Hour 12-Hour 24-Hour
12:00 
mid nig ht0000 12:00 
noon1200
 1:00 am 0100 1:00...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-26 Administer the Circuit Packs 
3
Administer the Circuit Packs
After the eq uip ment is installed  (inc lud ing  c irc uit p ac ks), the c irc uit pac ks must 
b e ad ministered . Refer to 
DEFINITY Enterp rise Communic ations Server Release 
8 Ad ministration and  Feature Desc rip tion
 for more information.
The following...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-27 Administer the Circuit Packs 
3
Form Instructions
Screen 3-6. Change Circuit-Packs Screen
NOTE:
Each page of the form represents 1 carrier within the cabinet specified on 
the command line. For R8si configurations, all carriers and slots appear 
even if they are not included in the actual hardware. This supports...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Accessing and Activating the System 
3-28 Administer the Circuit Packs 
3
Tab le 3-10 lists the slots to use, and the c irc uit p ac k typ es that may b e 
ad ministered  in those slots, for eac h c omb ination of 
Cab inet/Carrier/Carrier Typ e in a R8si c onfig uration.
nCode
 — Enter the c irc uit p ac k c od e (TN followed  b y a 3- or 4-d ig it 
numb er). If there...