Lexmark X544 Manual
Have a look at the manual Lexmark X544 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3D EF6M NO9W XYZ#2ABC5JK L8TUV01@! .GH I4PQRS7* 2Open the top door. KMCYYCM K 3Remove the toner cartridges by lifting the handles, and then gently pulling away from the imaging kit. Maintaining the printer191
4Remove the right side cover. 5Press the green levers on each side of the waste toner bottle, and remove it. 6Lift the blue levers on the imaging kit, and then pull it toward you. 7Press down on the blue levers, grasp the green handles on the sides, and then pull the imaging kit out. Warning—Potential Damage: Do not touch the underside of the imaging kit. This could damage the imaging kit. Maintaining the printer192
8Unpack the replacement black and color imaging kit. Leave the packaging on the developer units. 9Gently shake the yellow, cyan, magenta, and black developer units side to side. 10Remove the red shipping cover from the yellow, cyan, magenta, and black developer units. 11Insert the yellow, cyan, magenta, and black developer units. 12Place the used black and color imaging kit in the enclosed package. Maintaining the printer193
13Align and insert the imaging kit. 14Replace the waste toner bottle. Maintaining the printer194
15Replace the right side cover. 16Replace the toner cartridges. 17Close the top door. KMCYYCM K Maintaining the printer195
18Close the front door. 3DEF6MNO9WXYZ#2ABC5JKL8TUV01@!.GHI4PQRS7* Replacing a toner cartridge Replace the specified toner cartridge (yellow, cyan, magenta, or black) when 88 Replace Cartridge appears. The printer will not continue printing until the specified cartridge is replaced. Warning—Potential Damage: Damage caused by use of a non‑Lexmark toner cartridge is not covered under warranty. Note: Degraded print quality may result from using non‑Lexmark toner cartridges. 1Make sure the printer is on and Ready or 88 Replace Cartridge appears. 2Unpack the new cartridge, and set it near the printer. 3Open the top door. KMCYYCM K Maintaining the printer196
4Remove the toner cartridge by lifting the handle, and then gently pulling away from the imaging kit. 5Align the new toner cartridge, and then press down until it is all the way into the slot. Maintaining the printer197
6Close the top door. KMCYYCM K Replacing a developer unit Replace a developer unit when a print quality defect occurs or when damage occurs to the printer. 1Grasp the front door at the side handholds, and then pull it toward you to open it. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 3DEF6MNO9WXYZ#2ABC5JKL8TUV01@! .GHI4PQRS7* Maintaining the printer198
2Open the top door. KMCYYCM K 3Remove the toner cartridges by lifting the handles and then gently pulling away from the imaging kit. 4Remove the right side cover. Maintaining the printer199
5Press the green levers on each side of the waste toner bottle, and then remove it. 6Lift the blue levers on the imaging kit, and then pull it toward you. 7Press down on the blue levers, grasp the handles on the sides, and then pull the imaging kit out. Warning—Potential Damage: Do not touch the underside of the imaging kit. This could damage the imaging kit. Maintaining the printer200