Kyocera TASKalfa 221 User Manual

							Printer Settings2-15
Interface
This machine is equipped with a parallel interface,  USB interface, and network interface as standard 
components.
How to Display the Interface Screen
1Press the  Printer key.
2Press the  S key or the  T key to select MENU .
3Press the Enter key.
4Press the  S key or the  T key to select Interface.
5Press the  Enter key. The  Interface screen is displayed.
Next, perform the setting referri ng to the following description of each setting item.
Network Setting
To perform network printing, network  setting is required. This section describes the setting required 
for using the network function.
NoteBefore setting the IP address, ask your network administrator to obtain the address and prepare it.
NetWare Frame
When connecting to a NetWare network, turn this setting  On.
1Display the  Interface screen.
2Press the S key or the  T key to select Network .
3Press the Enter key.
4Press the  S key or the  T key to select NetWare .
5Press the Enter key.
6Press the  S key or the  T key to select On or  Off.
7Press the  Enter key. If you have selected  On, Change # is displayed.
GO
CANCEL
Ready
MENU
Back
Print Status Page
Menu
Interface
Back
USB
Interface
Network
Back
NetWare
N etw or k  Setting
TCP/IP
Back
On
NetWare
Off
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings
2-16
8Press the S key or the  T key to select  Change #.
9Press the Enter key.
10Press the  S key or the  T key to select the frame 
mode.
11Press the  Enter key.
12Press the  Reset key. The message display retu rns to the printer basic screen.
EtherTalk
When using this machine by connecting to  an Apple Macintosh computer, turn EtherTalk  On.
1Display the Interface screen.
2Press the S key or the  T key to select  Network.
3Press the Enter key.
4Press the  S key or the  T key to select  EtherTalk.
5Press the Enter key.
6Press the  S key or the  T key to select  On.
7Press the  Enter key. 
8Press the  Reset key. The message display retu rns to the printer basic screen.
On
NetWare
Off
Change #
Back
Auto
NetWare Frame
802 .3
Back
USB
Interface
Network
N etw or k  Setting
NetWare
TCP/IP
EtherT alk
Back
On
EtherTalk
Off
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings2-17
TCP/IP
When connecting to a Windows network through TCP/IP, turn TCP/IP  On.
1Display the Interface screen.
2Press the S key or the  T key to select Network .
3Press the Enter key.
4Press the  S key or the  T key to select TCP/IP .
5Press the Enter key.
6Press the  S key or the  T key to select On.
7Press the  Enter key. 
DHCP
This machine supports DHCP (Dynamic Host Conf iguration Protocol). When using DHCP, turn 
DHCP  On.
1Display the  TCP/IP screen referring to steps 1 to 5 of  TCP/IP setting.
2Press the  S key or the  T key to select Change # .
3Press the Enter key.
4Press the  S key or the  T key to select DHCP .
5Press the Enter key.
6Press the  S key or the  T key to select On.
7Press the  Enter key.
Back
USB
Interface
Network
Back
NetWare
N etw or k  Setting
TCP/IP
Back
On
TCP/IP
Off
On
Off
TCP/IP
Change #
Back
DHCP
TCP/IP Setting
IP Address
Back
On
DHCP
Off
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings
2-18
IP Address
Register the IP address of this machine.
Notes• To obtain the IP address to enter, check with your network administrator before performing this setting.
• Before entering the IP address by following the  instructions below, be sure to turn the DHCP 
setting  Off and the TCP/IP setting On.
1Display the  TCP/IP screen referring to steps 1 to 5 of  TCP/IP setting.
2Press the  S key or the  T key to select  Change #.
3Press the Enter key.
4Press the  S key or the  T key to select  IP Address.
5Press the Enter key.
6Use the numeric keys to input the IP address. Enter the 
first block of 3 digits of the address in the highlighted 
area.
7Press the  > key. Enter the next block of 3 digits of the 
address in the highlighted area.
8Continue the same procedure for the other 2 blocks.
9Press the  Enter key.
Next, set the subnet mask.
Subnet Mask
To register the subnet mask, conti nue the procedure from step 9 above.
1Press the S key or the  T key to select  Subnet Mask .
2Press the Enter key.
3Use the same procedure as steps 6 to 8 of  IP Address 
setting to input the address.
On
Off
TCP/IP
Change #
Back
DHCP
TCP/IP Setting
IP Address
IP Addres s
0  0 
..0  0 .
IP Addres s
10 0 ..0  0 .
DHCP
IP Address
TCP/IP Setting
Subnet Mask
Subnet Mask
0 0 
..0  0 .
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings2-19
4Press the Enter key.
Next, set the default gateway.
Default Gateway
To register the default gateway, contin ue the procedure from step 4 above.
1Press the S key or the  T key to select Gateway .
2Press the Enter key.
3Use the same procedure as steps 6 to 8 of  IP Address 
setting to input the address.
4Press the  Enter key.
5When you finish making all of the setting, press the  Reset key. The message di splay returns to the 
printer basic screen.
Network Status Page Printing
When printing the status page, you can also  print the network status page in succession.
1Display the Interface screen. (See  How to Display the Interface Screen  on page2-15.)
2Press the  S key or the  T key to select Network .
3Press the Enter key.
4Press the  S key or the  T key to select Network 
Status Page .
5Press the Enter key.
6Press the  S key or the  T key to select On or  Off.
7Press the  Enter key. 
8Press the  Reset key. The message display returns to the printer basic screen.
IP Address
Subnet Mask
TCP/IP Setting
Gateway
Gateway
0 0 
..0  0 .
Back
USB
Interface
Network
N etw or k  Setting
TCP/IP
EtherT alk
Network Status Page
Back
On
Network  Status Page Setting
Off
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings
2-20
Emulation
NoteYou can set the emulation for each interface.
Emulation Mode Selection
Emulation modes that can be used with this machine: PCL6, KC-GL , KPDL,  KPDL (AUTO) , Line 
Printer , IBM Proprinter , Diablo 630,  EPSON LQ-850 
If you set KC-GL , you can set the thickness of the pen and the page size.
If you set KPDL (AUTO), switching between KPDL and an alternative emulation mode will be 
automatically performed according to the print data.
If you set  KPDL or KPDL (AUTO), the details of any error that occurs during printing can be printed.
1Press the  Printer key.
2Press the  S key or the  T key to select  MENU.
3Press the  Enter key.
4Press the  S key or the  T key to select  Emulation.
5Press the Enter key.
6Press the  S key or the  T key to select the desired 
interface.
7Press the  Enter key.
8Press the  S key or the  T key to select the desired 
emulation.
9Press the  Enter key.
If you have selected  KC-GL, set KC-GL Pen Thickness .
If you have selected  KPDL or KPDL (AUTO) , set KPDL Error Printing .
If you have selected  KPDL (AUTO), perform KPDL (AUTO) Alternati ve Emulation Selection .
GO
CANCEL
Ready
MENU
Print Status Page
Menu
Interface
Emulation
Back
USB
Interface
Network
Back
PCL  6
Emulation
KC-GL
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings2-21
KC-GL Pen Thickness
If you have selected the KC-GL emulation, you ca n set the thicknesses of the eight pens and the 
page size. Continue the procedure from step 9 of  Emulation Mode Selection to set these items as 
shown below.
1Press the  S key or the  T key to select KC-GL Pen 
Adjust.
2Press the  Enter key.
3Press the  S key or the  T key to select the pen to set.
4Press the  Enter key.
5Press the  < key or the  > key to input the thickness 
(number of dots).
6Press the  Enter key.
7Press the  S key or the  T key to select Back .
8Press the Enter key.
9Press the  S key or the  T key to select KC-GL Page 
Set .
10Press the  Enter key.
11Press the  S key or the  T key to select the page size.
NoteSPSZ is the size specified wit h the PRESCRIBE SPSZ command. Fo r details of the PRESCRIBE 
commands, refer to the  PRESCRIBE Command Reference Manual .
12Press the Enter key.
13Press the  Reset key. The message display returns to the printer basic screen.
Back
KC-GL Pen Adjust
KC-GL
KC-GL Page Set
Back
Pen (1)
KC-GL Pen Adjust
Pen (2)
(01
Pen Width
199 )dot ( s)
Back
KC-GL Pen Adjust
KC-GL
KC-GL Page Set
B1
KC-GL Page Set
B0
SPSZ
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings
2-22
KPDL Error Printing
The details of any error that occurs during printing in the KPDL emulation mode can be printed. 
Continue the procedure from step 9 of  Emulation Mode Selection  to set this item as shown below.
1Press the S key or the  T key to select  Print KPDL 
Errs .
2Press the  Enter key.
3Press the  S key or the  T key to select  On or  Off . If 
you set  On, the details of any error will be printed.
4Press the  Enter key.
5Press the  Reset key. The message display retu rns to the printer basic screen.
KPDL (AUTO) Alternative Emulation Selection
If you set KPDL (AUTO), switching between KPD L and an alternative emulation mode will be 
automatically performed according to print data. Continue the procedure from step 9 of emulation 
mode selection to set th is item as shown below.
Available emulation modes:  PCL6, KC-GL, Line Printer , IBM Proprinter , DIABLO 630, 
EPSON LQ-850
1Press the  S key or the  T key to select  Alt. 
Emulation.
2Press the  Enter key.
3Press the  S key or the  T key to select the desired 
emulation mode.
4Press the  Enter key.
5Press the  Reset key. The message display retu rns to the printer basic screen.
Back
Print KPDL Errs
KPDL
Back
On
Print KPDL Errs
Off
Back
Alt. Emulation
KPDL(AUTO)
Print KPDL Errs
Back
PCL  6
Alt. Emulation
KC-GL
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings2-23
Font
You can select the default font for  the current interface. The default font can be one of the internal 
fonts or a font stored in the optional memory card.
You can set the following items for fonts.
• Font Selection
• Font Size
• Courier/Letter Gothic Font Character Pitch
• Courier/Letter Gothic Font Setting
• Code Set Selection
• Font List Printing
NoteYou can set the font for each interface.
How to Display the Font Screen
1Press the  Printer key.
2Press the  S key or the  T key to select MENU .
3Press the Enter key.
4Press the  S key or the  T key to select Font .
5Press the Enter key.
6Press the  S key or the  T key to select the interface to 
set.
7Press the  Enter key. The  Font screen is displayed.
Next, perform the setting referri ng to the following description of each setting item.
Font Selection
1
Display the Font screen. (See  How to Display the Font Screen  on page2-23.)
2Press the  S key or the  T key to select  Select Font .
3Press the Enter key.
NoteIf optional fonts as well as internal fonts are stored in this machine, a screen for selecting  Internal 
font or  Option font  is displayed. Press the  S key or the  T key to select the font to set.
GO
CANCEL
Ready
MENU
Menu
Interface
Emulation
Font
Back
USB
Interface
Network
Back
Select Font
Font
Code Set
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings
2-24
4Press the S key or the  T key to select the font ID.
5Press the  Enter key. The font number is displayed.
Characters displayed before font numbers indicate the 
following items.
6Press the  < key or the  > key to input the font number. For internal font numbers, see  Font List 
Printing  on page2-26.
7Press the  Enter key.
8Press the  Reset key. The message display retu rns to the printer basic screen.
Font Size
If you have selected a proportional font as the def ault font, you can set the font size. If you have 
selected the Courier font or the Le tter Gothic font as the default font, this menu is not displayed and 
the character pitch setting is displayed.
1Display the  Font screen. (See  How to Display the Font Screen  on page2-23.)
2Press the  S key or the  T key to select  Select Font .
3Press the Enter key.
NoteIf optional fonts as well as internal fonts are stored  in this machine, a screen for selecting Internal 
font or  Option font  is displayed. Press the  S key or the  T key to select the font to set.
4Press the  S key or the  T key to select  Detail.
5Press the  Enter key.
6Press the  < key or the  > key to input the character size. 
You can set the character size to 4.00 to 999.75 point.
7Press the  Enter key.
Back
Select Font
Detail
I000
Display Description
I Internal font
S Downloaded fonts
M Fonts in memory card
H Fonts in RAM disk or optional hard disk
O Fonts in optional ROM
Font ID
I000
Back
Select Font
Font
Code Set
I000Back
Select Font
Detail
I000
(4.00
Font Size Setting
8.50999 .75)Point
Downloaded From ManualsPrinter.com Manuals