Home > Konica > Printer > Konica Minolta magicolor 1690MF d User Manual

Konica Minolta magicolor 1690MF d User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Konica Minolta magicolor 1690MF d User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Cleaning the Machine 8-14
    5Lift the machine and reinstall it 
    on top of the attachment.
    6Open Tray 1 and reattach the dust cover.
    7If you removed the duplex option in step 1, reinstall it.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Cleaning the Machine8-15
    Cleaning the Media Feed Rollers for the Duplex
    1Open the duplex door.
    2Clean the feed rollers by wiping 
    them with a soft, dry cloth.
    3Close the duplex door.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Cleaning the Machine 8-16
    Print Head Window
    Continuing to use this machine with a dirty print head window can cause print 
    quality problems.
    Clearing the Print Head Window
    1With the main screen displayed, press the * key to display the PRINTER 
    MODE screen.
    2Press the , key to select T/C CHANGE and then press the Select key.
    3Press the , key to select P/H CLEAN MODE and then press the Select 
    key.
    It is not possible to exit P/H CLEAN MODE before the operation is 
    finished (even if the Stop/Reset key is pressed).
    If the machine has incorrectly been switched to P/H CLEAN 
    MODE, perform steps 4 through 7, then steps 11 through 16 (skip-
    ping steps 8 through 10) to exit P/H CLEAN MODE mode.
    4Open the front cover.
    Before opening the front 
    cover, open Tray 1 if it is 
    not already open.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Cleaning the Machine8-17
    5The magenta toner cartridge has 
    been moved to the position from 
    where it can be replaced.
    Pull down the handle on the 
    toner cartridge until the toner 
    cartridge is unlocked and moves 
    out slightly toward you.
    Remove the toner cartridge.
    When the magenta toner 
    cartridge is removed, a 
    gap is created within the 
    machine so that the print 
    head window can easily 
    be cleaned.
    Note
    Do not touch the contact 
    indicated in the illustration.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Cleaning the Machine 8-18
    6Close the front cover.
    The toner cartridge rotate 
    within the machine.
    7After the toner cartridges have 
    finished rotating, open the scan-
    ner unit.
    Note
    Do not touch the wires and flat 
    cable shown in the illustration.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Cleaning the Machine8-19
    8Grab the handle and lift it up 
    slightly to the back, and then 
    slowly pull the imaging cartridge 
    out vertically.
    Note
    Do not touch the PC drum and the transfer belt on the imaging 
    cartridge. 
    Position the removed imaging 
    cartridge horizontally as shown in 
    the illustration at the right.
    Be sure to keep the imaging 
    cartridge horizontal and place it 
    where it will not become dirty.
    Do not leave the imaging 
    cartridge removed for more than 
    15 minutes, and do not place the 
    removed imaging cartridge in a 
    location where it would be 
    exposed to direct light (such as 
    sunlight).
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Cleaning the Machine 8-20
    9Clean the print head window by 
    wiping it with a soft, dry cloth.
    CAUTION
    The area around the fuser unit is 
    extremely hot.
    Touching anything other than the 
    indicated levers may result in 
    burns. If you get burned, 
    immediately cool the skin under 
    cold water, and then seek 
    professional medical attention.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Cleaning the Machine8-21
    Note
    Decreased print quality may 
    result if the surface of the 
    transfer roller is touched.
    Be careful not to touch the 
    surface of the transfer roller.
    10Slowly insert the imaging car-
    tridge vertically, and then push it 
    slightly down toward you to fin-
    ish reinstalling the imaging car-
    tridge.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Cleaning the Machine 8-22
    11Close the scanner unit.
    Note
    Do not touch the wires and flat 
    cable shown in the illustration.
    12Press the Stop/Reset key.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Cleaning the Machine8-23
    13After the toner cartridges have 
    finished rotating, open the front 
    cover.
    14Align the shaft on each end of 
    the toner cartridge with its hold-
    ers, and then insert the car-
    tridge.
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Konica manuals Comments (0)

    Related Manuals for Konica Minolta magicolor 1690MF d User Manual